124

This is the tool I love to use when troubleshooting engine operating temperature problems. You can stand back and aim the beam right on a spot on the radiator or engine to get an exact temperature reading. This can indicate whether or not your radiator is plugged and confirm if your temperature gauge is accurate or not.

If you are running SVO it can give you accurate readings of the temperature of your oil - both during filtering and coming out of your boost heater.

Features:

High Quality (made in USA) brass two way fuel rated valve with brass fittings for 3/8 inch fuel hose. Can be used to select between two fuel tanks or as a control valve for your loop or return fuel with running on SVO. Comes with two straight non-barbed hose fittings and one 90 degree fitting. This will allow max flexibility in how you route your fuel hoses. NO instructions included.

High Quality (made in USA) brass two way fuel rated valve with brass fittings for 8 mm or 5/16 inch fuel hose. Can be used to select between two fuel tanks or as a control valve for your loop or return fuel with running on SVO. Comes with two straight non-barbed hose fittings and one 90 degree fitting. This will allow max flexibility in how you route your fuel hoses. NO instructions included.

NEW LOCTITE PRODUCT - AUGUST PROMO! If you have read very many of my manuals and instructions you already know how much I detest Silicone Gasket Sealant. I know there are places for silicone (ie bath tub caulking, etc), but it should not be used on internal combustion engines!

Applies to all Mercedes, PON FIN Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201, and 124 chassis. Here is a kit you will love to have around the shop. If you don't like using those poor quality US hose clamps (the kind that cut into the hose) then here is a chance to have spare quality (no nick) hose clamps for those fuel and coolant related repairs. Kit comes with  large size hose clamp. Hose clamp size is 32-50/9.

Applies to all Mercedes, PON FIN Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201, and 124 chassis. Here is a kit you will love to have around the shop. If you don't like using those poor quality US hose clamps (the kind that cut into the hose) then here is a chance to have spare quality (no nick) hose clamps for those fuel and coolant related repairs. Kit comes with 10 medium size hose clamp. Hose clamp size is 16-27/9.

These rubber end plugs can be used to cap off your vacuum on the end of a line or on certain components. FOR USE ON VACUUM SYSTEM ONLY. These are NOT to be used on fuel injectors.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a L shaped fitting that fits 115, 116, 123, and 126 chassis.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings or hose were swollen and would just not stay connected? Here is some extra vacuum hose to fix your problem. Fits 115, 116, 123, and 126 chassis.

ONE meter cut piece.

When was the last time you knocked one of your vacuum lines off around the oil fiter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a Y shaped fitting that fits 115, 116, 123, and 126 chassis.

When was the last time you knocked one of your vacuum lines off around the oil fiter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a + shaped fitting that fits 115, 116, 123, and 126 chassis.

When was the last time you knocked one of your vacuum lines off around the oil fiter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a U shaped fitting that fits 115, 116, 123, and 126 chassis.

This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure. This part measures 34 mm in diameter.

We are seeing more freeze plugs rust out from the inside as these engines age. First sign will be a little rust ring around the outside edge of the plug, next sign will be slight coolant loss, and last sign may be catasropic engine over heat. Check your freeze plugs for any sign of deterioration NOW.

This seal and gasket kit will solve your problems with any external or internal (into the engine) leaks at the hydraulic pump (location at the front of the cylinder head). If your hydraulic fluid is disappearing from the tank and you can't see any leaks in your rear suspension - then it is possible the shaft seal of your pump is bad and fluid is leaking into your engine oil (and yes, this is not good!). This same pump is used on all Mercedes self-leveling suspension systems from the late 1970's up through 1991. Your pump will need to be removed from your engine in order to install new seals and gaskets. You should have correct fluid (Mercedes type) and a new fluid filter on hand before you begin. CLICK HERE to order those items.

Complete R134a retrofit kit as shown to convert your A/C system.  Keep in mind this may not repair all problems with your current A/C system. This kit is designed to go into a good working system. There maybe other parts you will want to purchase such as receiver dryer, etc while doing this conversion. Consult with your local A/C specialist if you are unfamiliar with air conditoning systems.

PLEASE NOTE: We are supplying this inexpensive kit as a convenience to our customers. It will not come with detailed instructions nor do we offer support on how to convert your current system. That will be between you and your local A/C specialist.  

New Ansa muffler and connecting pipe as shown. Fits all 124 sedan 300D 2.5 from 1990 to 1993. It is common for these mufflers to rot from the inside out. If you have excessive noise at freeway speeds it may be your center (and possibly rear muffler as well).

Fits all 124 sedan 300D 2.5 from 1990 to 1993. It is common for these mufflers to rot from the inside out. If you have excessive noise at freeway speeds it may be your rear (and possibly center muffler).

Note: This new rear muffler is left over from our old stock and we are passing savings on to you. Prices on German parts are going up almost daily. Only one left at this price.

Great to carry in trunk for emergencies. Nice case. No instructions included with this kit. Bulbs are applicable to most models from the early 70's to late 80's.

This kit includes:

This is one cool pre or final protection fuel filter. I have been looking for something like this for a long time. Not only is it all metal, just the right size, has a 60 micron large cleanable screen, but it can be taken apart by hand... and that is certainly a big plus when you are out on the road faced with a plugged-up filter!

PLEASE NOTE: THIS IS NOT A PRODUCT, JUST INFORMATION WE WILL BE PROVIDING ON THE WEBSITE. STILL UNDER CONSTRUCTION! This question could well be the number one request we receive from new customers. The question seems to be popping up frequently now as many people are buying these old diesels for the first time hoping to convert them to run on alternative fuel. It is a great idea and can be a rewarding endevour IF you find the right car to begin with and are willing and able to repair it yourself.

Kent has packaged together four of his most popular signature series products that will allow you to service, overhaul and tune your diesel fuel injectors yourself. All together these are key to helping you understand how your fuel injectors work, how to inspect and clean them, how to install new performance Monark injector nozzles, and how to balance tune them for maximum power and fuel effeciency.

These include the following items: Click on each one to read more.

Fuel Injector Pressure Bench Tester 

Diesel Injector Cleaning and Testing Procedures 

Diesel Injector Cleaning Brass Tool Kit 

Running badly means poor performance. It happens sooner or later to EVERY diesel owner. The word "performance" is often used to describe how well a diesel engine runs once started. The principles discussed will cover all Mercedes diesels from the mid 1950s to the mid 1990s. Throughout this manual I will use this word to discuss a number of common problems. How performance is rated can mean different things to different people. In the following pages I will relate diesel performance to the following four criteria:

• How much power does it produce?
• What kind of fuel economy does it deliver?
• How smooth does the engine run?
• How much does the engine smoke?

These thin shim washers can be added to an existing injector shim to meet the thickness required to increase release pressure. Buy using a thicker shim along with 1 to 3 thin shims you will be able to make a number of different thicknesses within the 0,20 mm range. This kit contains six each of thin 0,20 mm washers.

These thin shim washers can be added to an existing injector shim to meet the thickness required to increase release pressure. Buy using a thicker shim along with 1 to 3 thin shims you will be able to make a number of different thicknesses within the 0,10 mm range. This kit contains six each of super thin 0,10 mm washers

If you are adjusting your injectors and your pressure reading is low you may only have to add one or two of the thin washers to bring the pressure up to spec. If your pressure reading is too high you will need to go down in thickness by choosing a think shim you have available and adding 1 or 2 thin (or any multiple you like) ones to build the thickness required. We also supply thin washer sets in 0,05 and 0,20 mm sizes.

These thin shim washers can be added to an existing injector shim to meet the thickness required to increase release pressure. Buy using a thicker shim along with 1 to 3 thin shims you will be able to make a number of different thicknesses within the 0,05 mm range. This kit contains six each of super thin 0,05 mm washers

If you are adjusting your injectors and your pressure reading is low you may only have to add one or two of the thin washers to bring the pressure up to spec. If your pressure reading is too high you will need to go down in thickness by choosing a think shim you have available and adding 1 or 2 thin (or any multiple you like) ones to build the thickness required. We also supply thin washer sets in 0,10 and 0,20 mm sizes.

One of the more challenging aspects of adjusting the release pressures on your diesel fuel injectors is finding the exact thickness shim washer you need to make the proper spring pressure adjustment. If you try to do it with just one shim per injector you end up needing a large assortment of all sizes of shims ranging from 0,80 mm to 1,95 mm. And knowing Murphy’s law all too well, you will end up needing the shim size that you do not have.

You are looking at the worlds first production diesel mechanical fuel injector bench tester available in the U.S. for under $200. These are built in Mercedessources own shop to control quality and production demands.  This bench mount tester will allow you to economically test the spray pattern and fine tune (balance) your fuel injectors at home. With the injector fitting included it will work on all Mercedes diesels from the early 1960's up to 1993. It will also work on any mechanical Bosch type fuel injector with adjustable pressure release function - altough you may have to come up with your own adapter to attach the injector to the tester. (manufactured up to the mid 1990s). Assembled with special FLUTTER GUARD pressure gauge to stabilize needle bounce.

The injector heat shield washers on a diesel engine must be replaced anytime you remove your fuel injectors. These fit all 601 602 603 (4, 5, and 6 cylinder) aluminum head diesel engines from 1984 to 1993. CLICK HERE to view our nozzle kits.

5 handy bulbs to carry in your trunk for emergencies.  2 single element for turn signal, brake light or backup lights. 2 small single element for tail light running lights (correct size and watts to prevent melting plastic). 1 twin element bulb for from marker / turn signal lens.

Fits almost all models from the early 1970s to the mid 1990s

This bulb is a single element bulb that is used in the brake light, rear turn signal and your rear back up lens. It's a very universal bulb. Fits mid 60s to 90s Mercedes.