Search | W201 | Engine

Displaying 51 - 100 of 128
On Demand Video
$12.99

Super Extreme Engine Compartment Detailing - On Demand Video

This is over the top detailing. Watch Kent perform magic on his 560SEC engine compartment. 45 minute long instructional video

Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?

$8.95

Lubro Moly Diesel Hi Test Fuel Additive

Lubro Moly Diesel hi test fuel additive that does far more than just add lubrication to the fuel. Formulated for the new low sulfur diesel fuel. Contains an additive against injection pump and injector wear.

PDF
$7.95

Pre-Glow Systems Tips, Quick Tests and Upgrades - All Diesels 1960 to 1993 Download

Manual by Kent Bergsma: Book 5 of a 5 Book series

During his years of working on diesel engines, Kent has learned a few things about glow plugs. Some he learned the easy way and others he learned by “pain and suffering.” If misunderstood or improperly maintained, glow plugs can be the “achilles heal” of a diesel.

PDF
$6.95

Pre-Glow Parallel Systems Testing 1978 to 1993 by Kent Bergsma - Download

Manual by Kent Bergsma: Book 2 of a 5 Book series

This book explains how a parallel pre-glow system works and how to properly test it using inexpensive electrical testing equipment. If your PENCIL style glow plugs are not working properly, you need to find the cause BEFORE you start buying parts.

PDF
$8.95

Why Does My Diesel Engine Run So Badly? by Kent Bergsma - Download

Diagnosing poor power, horrible fuel economy, rough running and excess exhaust smoke

Running badly means poor performance. It happens sooner or later to EVERY diesel owner. The word "performance" is often used to describe how well a diesel engine runs once started. The principles discussed will cover all Mercedes diesels from the mid 1950s to the mid 1990s.

PDF
$8.95

Diesel Engine Fluid Leak Diagnostic Guide - Download

Covers finding the sources of your leaks - NOT how to repair them.

In a perfect world your diesel would not leak a drop of fluid. Unfortunately, with the age of your vehicle, it may not be economically possible to eliminate every leak. Sometimes you may just have to live with some leaks.

PDF
$10.95

103 Engine 6 Cylinder Power Tuning Guide By Kent Bergsma - Download

Repair Guide for the Following Models: 190E 2.6, 260E, 300E, 300CE, 300TD, 300SEL 1986 - 1992

Fits the following, 201, 124, and 126 chassis with 6 cylinder single cam gas engine. In my opinion, the 103 6 cylinder gas engine (built from 1986 to 1993) is one of the best engines Mercedes has ever built.

$12.75

Very High Temp Engine Sealing Compound

Elring Dirko brand Permanently Elastic; 85g Tube - Rated to 600 F

Dirko sealing compound is permanently elastic, cold vulcanizing, silicone-rubber based. Can be used for connecting joints, cylinder head, crankcase, oil sump, timing case, thermostat, water pump, transmission, axles, differential, radiator, chassis.

$14.95

115 116 123 126 201 124 Diesel HEAVY DUTY Rubber Exhaust Hangers x 4

NEW DESIGN - Best exhaust hangers for rattle prevention - and they stay on!

Fits all DIESEL ENGINE exhaust systems for 115, 116, 123, 126, 124 and 201 chassis from 1968 to 1995. If you are looking for a more robust exhaust hanger this is it! It is a stronger and more secure exhaust hanger than the standard round rubber type.

$24.50
Currently out of stock.

Click-Stop 3/8 Inch Drive Long-Handle Torque Wrench and Case

Perfect size for torquing spark plugs and other important engine components.

This is a very handy smaller torque wrench to have in your toolbox. Perfect for spark plugs. It will do fuel injectors but is not quite big enough to torque wheel lug bolts. Range is 5 to 80-foot pounds. The case will be black rather than red.

$29.50

Engine Crank Rotation Adjustable Length 1/2 Inch Drive Ratchet Wrench

Rotate Engines on 220D 240D 300D 300CD 300TD 300SD 300SDL and all V8's from 1970 to 1991 - Extends to 18 inches long!

This is Kents new favorite ratchet wrench for turning engines over during service and repair. There are a number of maintenance procedures that require you rotate the engine over by hand.

$45.80

Early Diesel Pre Chamber Removal Threaded Tool (up through 1987 models only)

A slide hammer is required. A collar nut tool is required. See the full explanation below

If you already have or are willing to buy a 5 pound slide hammer this special threaded fitting will allow you to PULL the pre-chamber from the cylinder head once you have removed the collar nut and the glow plug ( a collar nut removal tool is required look below to learn more).

$28.95

1/2 Inch Drive Clicker Torque Wrench 20 - 150 Ft. Lbs.

A must have for any DIYer. Especially diesel fuel injectors and wheel bolts!!!

If you are going to work on your diesel fuel injectors, you are going to need a torque wrench. If you are going to tighten your alloy wheel lug bolts properly, you should use a torque wrench. In fact, if you do your own work, you should have a 1/2-inch clicker torque wrench in your toolbox.

$23.95

Diesel Injector Removal Socket and Pick with Instructions

Finally we can offer a strong and very deep socket that will work on all Bosch Diesel Injectors from the late 1950's to 1994

Works on 110, 115, 116, 123, 201, 126 and 124 diesel engines 200D 220D 240D 300D 300CD 300TD 300SD 190D 300SDL. We have found that over half of the deep sockets we test will not go over some of the longer injectors.

$22.75

60x Diesel Engine Compartment Fuel Hose and Clamp Replacement Kit

For 190D 1984 to 1993 and 300D 300TD 300SDL 350SD 350SDL 1986 to 1993

This inexpensive kit will allow you to replace the old hardened and brittle fuel hose in your 601 602 or 603 diesel's engine compartment as well as those old worn out factory clamps with new high quality worn gear clamps that will not cut into the rubber hose.

$8.95

Pencil Glow Plug Reamer 12 mm Special Tool - MADE IN USA

For diesel engines 1980 to 1993 300D 300TD 300CD 190D 300SDL and 1978 to 1985 300SD

When using a pencil glow plug reamer, this modified 12 mm wrench will allow you to PUSH in on the reamer while turning - and let me tell you - this is needed when you have heavy carbon buildup in the prechambers.

$9.95

Engine and Component Assembly Lube

Lubro Moly Brand

High quality lubricant to be used when assembling bearings in engines or in components that are oiled by engine oil. This WILL prevent scoring and wear upon initial start-up after overhaul.

$2.50

LATE Bosch CIS 6 Cylinder Fuel Injector to Holder Seal

For 1986 to 1993 M103 6 Cylinder from 061403, all M104 engines with CIS KE-Jetronic Fuel Injection

This is a critical rubber part that seals the fuel injector to the injector holder. Deterioration can result in high idle speeds and poor engine performance. Unless you have a low mileage car with soft seals, these should be changed when testing, cleaning, or replacing your fuel injectors.

$3.95

Pencil Glow Plug Wire End Nuts - Set of 10

All 240D 300D CD TD 190D 300SD 300SDL 350SDL with pencil glow plugs

Here are the correct size metric nuts with built in shoulder washer. If you drop these in behind the injection pump you may never find them. When doing glow plug service it is always a good idea to have some spare nuts on hand. New Bosch glow plugs do not come with new nuts.

$11.95

Lubro Moly Motor Oil Saver - For Diesel and Gasoline engines

UPS GROUND SHIPPING ONLY!

Another High Quality product from Lubro Moly. This is a 300ml can of Motor Oil Saver. It Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils.

$14.95

Power Steering Fluid - Per Liter

All Models with power steering from 1958 to 1985

This item can only be shipped UPS Ground because it is a liquid. One Liter of correct Power steering fluid. Fully compatible with Dexron II systems but has enhanced aditives to reduce steering box gear wear.

$46.75

103 Engine Bosch Distributor Rotor

All 6 Cylinder Gasoline Models from 1986 to 1992

Fits 124, 126 and 201 chassis - 124 Chassis 300E 2.6, 260E, 300E, 1986-1992, 1988-1989 300CE,  126 Chassis 300SE, 300SEL, 1988-1991, 201 Chassis 190E 2.6, 1987-1993.

Brand new Bosch Distributor rotor for above models.

$26.50

102 103 104 and V8 Gas Engine Fuel Pump Check Valve

Fits most gas models from mid to late 1980s up through mid 1990s (exceptions noted)

Each fuel pump has a critical check valve mounted at the pump outlet. The purpose of this check valve is to prevent fuel from leaking back through the pump after the engine has been shut down. Constant fuel pressure must be held in the fuel system for the engine to restart quickly.

$114.75

190E 260E 300E 300SE 300SEL New Fuel Pressure Accumulator

With M103 Single Camshaft 6 cylinder engines from 1986 to 1993 as well as a few others. See list below:

The fuel accumulator maintains the pressure in the fuel system for a certain time after the engine has been switched off. When the engine is running it serves to deaden the noise of the electric fuel pump.

$4.32

All Models Rear Muffler Rubber Stop Bumper

108 114 115 123 107 126 201 124

New rubber stop for rear exhaust bracket. It plugs into the body right above the back of the rear muffler. Helps prevent rattle. Fits almost all models from late 1960s to mid 1990s. When you hear something clunking in the back when you go over a bump, this part is probably missing.

$5.25

Diesel injector end plug

Plugs the rear most fuel injector on all diesel passenger cars from 1968 to 1995!

Brand new factory type braided cloth injector end plug for all diesels 220D 240D 300D 300CD 300TD 300SD 300SDL E300D, from 1968 to 1995. Sold individually. Check yours for cracks or leaking! Very important that the end plug be in good condition or fuel leaks will occur.

$11.95

Diesel Purge - Per Can

Can only be shipped UPS ground

PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.

freeze plug
$1.75

Gas and Diesel Engine Block Freeze Plug

This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure.

$12.95

Radiator and Heater Hose Pick Removal Tool

Use all all vehicles to "unstick" old rubber coolant hoses

If you plan to change coolant hoses this is a must-have labor-saving tool. This is one cleverly designed tool. I could not have done it better myself. I actually use to make a couple of different types before I found this one.

$18.95

Gas and Diesel Engine Timing Chain Guide Rail Pin Removal Tool

For 3.5 4.5 380 420 560 V8s - 220D 240D 300D 300CD 300TD 300SD

Almost all Mercedes gas and diesel engines from the late 50's up to the early '90s used pressed in steel pins to hold the timing chain guide rails in position (inside the engine block).

103 valve cover gasket
$19.50

190E 2.6 300E 300SE Valve Cover Gasket

103 Engine

New valve cover gasket. Common source of engine oil leaks. Must be replaced any time you remove the valve cover. Fits all 103 engines 1986 to 1993. No instructions included.

103 valve stem seals
$29.50

190E 2.6 300E 300SE Valve Stem Seal Replacement Kit

103 Engine

 If you are experiencing high oil consumption and excessive engine smoke with your 6 cylinder 190E or 300E (CE and TE) or 126 300SE / L with the single cam 103 engine this is most likely what you need to fix the problem.

Early 104 Gas Engine Serpentine Belt
$32.95

Early 104 Gas Engine Serpentine Belt

Brand new Contitech Serpentine belt for 300CE 300SE 300SEL 300TE 190E from 1990-1993 with 104 engine. There are some vin splits on the end year, so any questions EMAIL with vin number before ordering.

SKU:GEG-COMSTB 

Pages