Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Can be installed on the following models: Please read carefully. All Turbo 116 and 126 300SD 1978 to 1985. All 123 turbo and non turbo 240D 300D 300CD 300TD 1980 to 1985. 1984 to 1989 201 190D. 1986 to 1991 126 300SDL 350SD and 350SDL. 1986 to 1993 124 300D and 300TD.
Can only be shipped UPS GROUND. NO INTERNATIONAL. Extra packaging charges may apply. It some cases it may be shipped in its own box depending on the size of your order and the other products included.
Does your rear end make funny noises while driving? Does the rear of your car sag in the back? Do you have excessive rear tire wear? Does the rear of your car feel like it is moving around? During heavy braking or rapid acceleration does your Mercedes want to steer right or left on its own!
Adjusting the power tilting sunroof is not difficult if you have the right knowledge and a couple alignment pin tools. Adjustment is not usually needed if the sunroof is working properly.
Doing your own diesel oil changes is not difficult. Granted you won't save a lot of money, but it will get you to regularly inspect your engine for oil leaks, etc and it will guarantee the job gets done right.
It is not as easy to remove the right side underdash panel in the 126 chassis as you might think. There are a number of hidden fasteners, some of which can be a little confusing as to how to remove properly. Kent has seen a lot of broken and damaged panels that confirm this.
When an old Mercedes ( or any other car for that matter ) has sat idle for over a year it can be a challenge to get it safely back on the road again. If it has sat idle for more than 5 years you may find it difficult to even get the engine running.
Understanding how an inside rear view mirror is mounted is essential for proper removal and replacement. The mirror can be easily damaged if you do not know the tricks to getting it snapped back into the mounting bracket in the head liner.
In this video Kent shares his technique for removing a padded steering wheel on most 107, 114, 115, 116, 123, 126, and 201 to 1985 chassis. These are the models WITHOUT an airbag.
Groaning, snaping and jammed door check straps are a common problem on the older models (up through 1995). This is primarily due to age and lack of lubrication. Newer models will soon start having similar problems. Rain water getting inside the doors is the big killer.
Diesel engines make noise. Some ticking and rattling is normal and not something you should be concerned about. Certain loud knocking or rattling noises could be a sign that something bad is happening to the engine, especially if the noise comes on suddenly.
This is part 2 of a 4 part video series Kent has done on repairing the power tilting sunroofs on the W201 W126 and W124 chassis built from 1986 to 1995. Part 1 covers removal and replacement of the sunroof panel and headliner.
If your transmission is shifting too soon it can really rob your car of power and acceleration. If it is shifting too late it can be very loud and annoying and even affect fuel economy.
To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.
When working under a Benz having the right equipment to put the car and hold it safely up in the air is very important. Always think safety, and the type of equipment and how it is used plays the key role in keeping you safe.
You will need to remove the W126 chassis center console upper wood panel when replacing the climate control switch panel, replacing any of the upper switches, replacing burned out light bulbs and /or when remove the center console or the upper dash.
When an old Mercedes ( or any other car for that matter ) has sat idle for over a year it can be a challenge to get it safely back on the road again. If it has sat idle for more than 5 years you may find it difficult to even get the engine running.
In this 10 minute video class Kent shows you what you should initially look for when checking out an older Mercedes for sale. He routinely does a quick 3 to 5 minute walk around to determine if the car passes his priority three part test.
Those three areas on inspection are:
There is nothing better than a good buff and wax to bring out the shine on an old Benz. Particularly if the car has not been waxed in a couple years! The results are directly related to the amount of work you put into it.
Why would you need to remove a fuel tank? If it is heavily rusted or contaminated sometimes it is just easier to find a good used fuel tank and replace it. Trying to clean a heavily gummed up fuel tank is a real challenge.
Malfunctioning and failed power window regulators (mechanisms) are so common on older Mercedes that Kent can almost guarantee if you own one and drive it regularly you will have to fix one at some point.
In this video Kent shares his secrets on how to make the inside of an old Benz look like new again. Now granted, you must have a reasonably good car to start with. He is not going to show you how to reupholster, change seats and door panels, etc.
In this video Kent will walk you through the step-by-step procedures he uses when diagnosing and repairing an older Mercedes diesel engine that either won't start or is very difficult to start.
This heavy, specially made fiberglass mat has thick bias ply fiberglass cloth, and the mat is very stiff even before you add resin or Miracle Paint. SOLD IN PRECUT PIECE 12" x 15".
If your diesel engine is starting to shut off very slowly or maybe not at all and you know your vacuum system is ok, it may be time to replace the vacuum fuel shutoff valve located at the rear of the injection pump.
Born out of frustration this twin chamber plastic bottle has solved two of Kent's biggest head aches when brake bleeding or flushing brake systems.
When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings or hose were swollen and would just not stay connected?
Keeping your injectors clean and tuned is one of the best ways you can improve mileage in a diesel. Buy both Kents new manual Diesel Fuel Injector Cleaning and Testing Procedures and his Top Brass Custom Cleaning Tool Kit and save!
This vacuum line is white and is 4 mm in size. It is used on all 107 108 109 110 111 113 114 115 116 123 124 126 chassis. You can use it to replace any hard vacuum line on the engine.
Mercedes 114, 115, 107, 116, 123, 126, 124, and 201 chassis window trim has a super strong anodized coating that is impervious to hand polishing but still can oxidize when exposed to harsh environmental elements. When this happens the trim becomes spotted and milky in color and it is NOT pretty!
New heater blower motor assembly with fan and housing. Installation is very easy once you get that pesky under dash panel off on the right side. We do include instructions for that but not for the actual removal of the motor. You will see the 8mm attachment bolts.
For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.
Fits all 123 chassis 1977 to 1985, all 126 chassis 1981 to 1991, all 201 chassis 1984 to 1993 and all 124 chassis 1986 to 1993.
FITS all 116 123 Diesel and Gasoline, and 126 chassis from 1977 to 1985. Finally a socket to remove your fuel tank screen that really works. Most correct size sockets tend to be SO BIG that they require 3/4 inch drive ratchets and extensions to use them. Who has those in their tool box??
Our flexible brake hose kit includes front brake hoses, rear brake hoses, 1 liter high performance brake fluid, 9x11 mm Flare nut wrench, thread sealant, three pairs of nitrile gloves, and complete pictorial instructions.
For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985. Buy the complete kit and save! If your Garrett T3 turbo has over 200K Kent highly recommends you plan on doing the complete overhaul.
Brand new rear Subframe mount kit made by Meyle, for 126 Chassis from 1986 to 1991, models listed above. No detailed instructions but here are some installation tips.
New Meyle heavy duty subframe mounts will eliminate rear-end wiggle and sway typical on these older chassis. No specific instructions are included but we do offer these tips for successful installation. A small tube of silicone grease and brush applicator are included at no extra charge.
Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991. PLEASE NOTE. These do not work on the W201 or the W124 chassis.
Can be successfully applied to all Mercedes Alloy (non chrome) Silver Wheels from 1970 to 1995. 108, 109, 107, 114, 115, 116, 123, 201, 126 and 124 chassis. Most of us have to admit that stained and peeling paint on Mercedes alloy wheels is ugly on any model.
If you are experiencing very hard or less than perfect shifts, a failed transmission modulator could be the problem. New Genuine Mercedes part. This unit is an upgrade over the original. It has a better thrust pin design which is less prone to cause pressure variations in cold weather.
Brand New Rotors as shown. You will receive 2 fronts as shown. Fits all 126 Chassis Gasoline and Diesel, from 1986 to 1991. Specifically 300SDL 300SE 300SEL 350SD 350SDL 420SEL 560SEL 560SEC.
Fits Gasoline Models only! 1982-1983 380SEC, 1984-1985 380SE, 1984-1985 500SEL, 1987-1993 190E 2.6, 1986 to 1989 300E, 1990 -1993 300E 4matic, 1990-1992 300CE, 1988-1991 300SEL, 1992-1993 400E, 1986-1991 420SEL, 1986-1991 560S
6 "German style" non-cutting hose clamps as shown. These are wider than most to better seal the hose to the fitting. See our other hose clamp assortments below.
In this collection you will receive the CIS pressure testing short kit and all 6 of Kent's videos on Bosch CIS fuel injection theory, tester connections and testing. Click on each link below to read about the specifics of each. This combo kit overs a great savings.
Learn how to install this critical repair kit correctly and how to test your monovalve function on the bench. In this 13-minute video, Kent shares how to install the kit while avoiding problems. Get your cabin heat working properly again!
This fits the U.S. models with automatic climate control which include the 1982 to 1989 R107 380SL, 500SL, and 560SL + the 1982 to 1985 W123 ALL models + the 1981 to 1991 W126 sedan and coupes. This is an easy fix that you can do yourself.
In this 24-minute instructional video, Kent shows you more than just how to change the transmission filter and the pan.
In this 19-minute detail instructions, Kent will show you how to get the old seal out, how to trial fit the new seal, and how to glue it in place properly. You can not believe how many seals we see that have not been installed properly.
In this detailed 22-minute video instruction, Kent will show you how to use his kit to perform a power drain on most 1965 to 1995 automatic transmission.