Diesel and Early Gas Fuel Injector Line Nut Custom Removal Wrench
Works on the following: 6 cylinder gas MFI engines 1959 to 1972, 6.3 and diesel engines 200D 220D 240D 300D 300TD 300CD and 300SD through 1985.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Works on the following: 6 cylinder gas MFI engines 1959 to 1972, 6.3 and diesel engines 200D 220D 240D 300D 300TD 300CD and 300SD through 1985.
You want superior stopping performance as well as minimum brake dust on your wheels - then these pads are what you want. Watch the video below - they are also really pretty! :-)
Watch the video below to see how this special wrench is used on the three nuts holding the exhaust downpipe to the turbocharger exhaust flange.
When replacing the thermostat in your order diesel you may end up fitting a lot of corrosion. This kit will help you make sure you do not have any leaks when you install the new thermostat and will prevent corrosion of the housing bolts in the future.
This is a hard-to-find adapter that will need if you have one of the early 1990s 5 and 6 cylinder turbo diesel engines. We machine this right here in our shop and it is designed to work directly with our OM61x compression tester ( see related products below):
Have you ever had a hard time finally a very small coolant leak? Do you find yourself adding small amounts of coolant but can not see any leak? Is there a funny smell coming from inside your Benz when you run the heater?
In this video, Kent will walk you through the steps needed to convert your older Brake Bleeder tank to one that can continue to bleed brake systems as well as pressure test radiators and cooling systems.
This easy-to-install kit could do wonders for your older diesel engine. The lift pump is almost always forgotten when it comes to maintenance on the OM616 and OM617 engines.
If you are experiencing hard starting or unexplained loss of power, your engine's lift pump could be failing.
Many uses for this quality hard steel tool including removing W123 and early W126 motor mount bolts.
Good used set of long mounting bolts as shown.
This is a perfect fit for the O.E. copper sealing ring. You only need one but we sell these as a set of two so you will have a spare.
This is where this sealing ring is located. On top of the fuel injection lift pump and at the base of the hand primer pump:
This is a "must-have" kit when adjusting release "pop" pressures on older diesel mechanical fuel injectors. It is the internal spring "shim" thickness that determines the exact pressure required for the release of fuel at the tip of the injector.
This tool will allow you to remove a cylinder head pre-chamber on a 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis). The special black fitting attached to the slide hammer is custom made in our shop.
On a regular basis, Kent and Gerson custom make tools to make certain jobs go easier and faster. So is the case with this long reach ratchet. It was developed to get glow plugs out of the older diesel engines without having to remove the hard lines.
This on-demand video will take you through the process of replacing the worn-out ball joint bushings that connect to the front suspension guide rod on all W126 sedans and couple built from 1980 to 1991. This video comes free of charge when you purchase our complete repair kit.
This is our complete kit for an at-home DIY repair. Loose and worn out guide rod ball joint bushings are the most common front suspension problem on the W126 sedans and coupes. Check the condition of yours if you have not recently done so.
If you already have our complete repair kit and just need an extra set of seals (10) here you go. No instructions included.
You will receive two (2) five liter bottles more than enough to do a full oil change on any vehicle:
If you acquire an older Mercedes diesel and want to test those large Bosch injectors with your V3 gasoline bench tester, you will need 4 things to complete the conversion: 3000 PSI gauge, our new capture bottle to hold the larger injectors, injector sealing kit, and Kent’s written manual and vid
Published in August of 2019, this has been one of the most requested videos over the past two previous years.
This video will cover the use of my custom plastic tool to safely remove the steel center section for the outside aluminum housing with rebuilding your older style SLS ( Self Leveling Suspension) hydraulic pump. No other instructions included here.
This price is for TWO nuts as shown. If you find you can not accurately adjust one of your older diesel engine valve clearances it usually means the threads on the lower adjusting nut are stripped. New ones are getting harder to find so we are offering good used as an alternative.
Please, what you see is exactly what will receive. These are mostly from OM616 and OM617 diesel engines and related transmissions and may NOT all be from the same vintage or chassis model. Study the picture carefully. Only one exactly like this.
Please, what you see is exactly what will receive. These are mostly from OM616 and OM617 diesel engines and related transmissions and may NOT all be from the same vintage or chassis model. Study the picture carefully. Only one exactly like this.
This video will not only save the condition of your door panel, but it will save you a lot of time and frustration when you go to replace a door panel after doing maintenance inside your door. Those old plastic film liners always seem to be torn, ripped, and downright ugly.
We know that many of you own multiple Mercedes, including both gas and diesel models. If you own one of Kent’s fuel injector pressure testers you no doubt will want to test all your applicable mechanical fuel injectors in both types of older engines.
Good used part as shown. No stripped bolts in housing. Even the balance tube banjo bolt threads are super. Hose nipples are not pitted like most.
This video is specifically for setting up and using Kent's newest version of his diesel fuel injector bench mount tester. It does not contain any information on the actual process of cleaning or rebuilding a fuel injector.
This is for number FOUR cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for number THREE cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for number TWO cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for the number one cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...
If you have worked on 5-cylinder 617 turbo diesel cylinder heads before you already know how important it is to have the correct socket for the star cylinder head bolts. This socket is a must to properly remove and re-torque those bolts.
This is for passenger side. It will fit the driver side but you will not have the wire for the seat belt buzzer. Make sure this will fit your style shoulder harness. SEE PICTURE.
Very good bolt with tight hex. Always use thread locking compound when replacing these bolts. Easy to round out with the wrong tool. See correct tool below:
UPS ground shipping only. Can not be shipped internationally. Rather than try to explain what this kit does and how it does it we are going to ask you to watch the video below if you have not already done so.
These might be needed when replacing the engine head or aluminum water pump housing. This includes the water pump bypass tube and the two small banjo bolts for the tube along with aluminum sealing rings.
Good used shield and 2 bolts as shown.
Only one available. Make sure yours is an exact match before ordering. Good clean and strong latching mechanism.
Your male harness insert MUST LOOK THE SAME as this picture.
This video is part of the full net repair kit we sell. See related products below. If you choose just to watch this video, you will have to source your own bungee cord and crimping sleeves.
This is the very best hose Kent has found to use to install spark plugs in restricted spaces. Watch the video below and he will demonstrate.
For later 240D 300D 300CD 300TD 300SD Models. Most after 1980 BUT YOU MUST LOOK AT YOUR PUMP BEFORE ORDERING! WATCH KENT'S VIDEO BELOW. You have asked for it and we have delivered again.
Good used bolt set with good hex heads.
Here is the location of these five important bolts. Do not use the cheap paper gasket in most gasket kits for the oil filter housing. It will leak!!!!
This on demand video only covers the principles of how to get a non-memory power seat in a 1980 to 1990 Mercedes to move forward and backward so you can get to the bolts to remove the seat from the car or remove the seat spring from the track assembly.
The motor mount shield may not be the exact one shown. It may be painted or original. No cracks. Not perfect but very usable. If you leave this off your rubber mount will fail much quicker.
These are the 4 long bolts that need to be removed when changing your W126 brake rod control joint on your front suspension. There are two on each side. They do not come in the repair kit so if you bolts are very rusty you might want to have these new bolts on hand before you start your repair.
If you have a reasonably good front seat bottom that is just a little HARD to sit on for any length of time then this "booster" kit may help solve your problem.
Our seat spring repair kit has been a great success! It can easily repair sagging on broken front seat springs. But what about seat padding. A lot of the older ( 1970's to 1980's glued fiber seat padding can crush down and even disintegrate over time.