Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
If you are removing and replacing your M110 fuel injectors these are the seals you should have on hand. Always replace the rubber seals. I know it is possible to reuse the plastic sleeves but many times they are brittle and will be damaged upon removal.
In this 9 minute instructional video, Kent will explain how to test your fuel accumulator to determine whether or not it has failed internally. A failed accumulator will make your engine hard to start when hot.
In this 14 minute instructional video, Kent will share with you the tools you will need along with some tips and tricks that will help you successfully remove a prechamber from the cylinder head. This can be done with the head on or off the engine.
Assortment includes 6 single-element brake and turn signal bulbs, 4 dual-element bulbs for the front marker lights, and 4 small tail light bulbs. Good idea to carry this assortment in the trunk of your car.
Includes Kent's four detailed videos on every aspect of this job! This is our combination kit for DIY installation of a new front crank seal in an OM617 turbo diesel engine. Price if purchased individually is $174.00.
In this 26 minute instructional video Kent will show you how to hook up a CIS fuel pressure tester to your older K-jectronic gas engine.
In this 10 minute instructional video Kent will explain why you want to "jump" your K-jet fuel pump relay, how to do it, how to find the location in you car, and why he prefers to have a long "switchable" jumper.
This xx minute video will take you step by step through the process of modifying your warm up regulator so you will be able to easily make adjustments to your cold start control pressure.
Assortment of new interior bulbs as shown. These light up your dash, center console, glove box and shifter ( on some models).
Assortment includes the following:
Before you make this modification you should be very familiar with the function of the WUR and how its pressure adjustements affect the performance of the K-Jetronic fuel injection systems. The tools and supplies offered in this kit will allow you to modify your warm up regulator at home and it y
New Mercedes o-ring as shown. Always replace this seal when removeing and cleaning your fuel tank strainer ( screen ).
This 16-minute video will instruct you on how to replace the fuel injectors in your 6 cylinder M110 safely and efficiently. Since this is a fairly straight forward remove and replace this is not a step-by-step video.
This is every thing you need along with free video instructions by Kent Bergsma. Why change the K-jet fuel injectors in your M110 engine. One thing is they are very old. Second this is right now they are readily available and resonably inexpensive.
We modify this wrench right here in our shop. If a picture is worth a thousand words, what is a video work. Watch the following for a full explanation.
Damage to these is becomming more common as they engines age. If your fuel injectors are not firing fuel properly the ends of the prechambers cac burn right off causing all sorts of "weird" engine performance problems.
FREE steel liner included as shown. Brand new old stock. Size on top of piston is 91.47
Very good used cast iron exhaust manifold as shown. Has been painted but please do not expect paint to hold up to heat over time.
This is a high-quality ACM aftermarket part. The fan runs smooth and air movement is very strong.
Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up. Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.
The sunroof transmission drive unit moves the cable back and forth to open and close the sunroof. There are 5 gears inside this unit that transfer the incoming drive from the motor ( high speed) to the final drive moving the cable (slow speed).
In part one Kent will show you how to get all the sunroof parts off our old Mercedes and on a bench particularly if you sunroof is broken and not moving. In this 21 minute instructional video here is a list of the subjects he covers:
Is your old gas engine running a little rough? There could be lots of reasons for this but if you have good compression, good plugs and wires you might consider replacing your O2 sensor even if your warning light is not showing up. This is an easy DIY job.
This is a part that hardly ever gets changed, and it is an easy DIY job if you can access it under your Benz. Make sure your model fits those described and has an O2 sensor installed. You can confirm that by the existence of an o2 sensor warning light on your dash.
These are very high quality bolts. Same 8mm thread and small 10mm head as the originals. 8 is enough for two front seats.
This is a sample of the nut plate they go into on the back attach point on the W123 front seats.
Please DO NOT try to check out online to purchase this vehicle. If you are interested email - sales@mercedessource.com. This is not your typical " super low mileage collector car." Often when these garage queens are purchased the owner assumes he will not have to do any work on it. Surprise!
Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.
You can purchase these individually, but you might want to consider replacing all four at the same time. If one is broken others are not far behind. Watch Kent's video below to see what happened to him and why he decided to manufacture these himself.
This custom-made thin head wrench by Kent Bergsma can save the day and your pocketbook. It is very important that you hold the fitting base on the oil cooler when removing the oil cooler hoses. A regular 22mm wrench is almost always too thick and can also cause damage.
In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles
Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.
This kit includes:
These have been inspected for good hex heads and for abnormal thread stretch. Threads will need cleaning before installation. Always use liberal blue thread locker when installing.
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.
Why is this so important? It is primarily due to the age of these cars now and the fact that lurking problems can be hidden from visual inspection. There is not ONE diesel that Kent has looked at in the last five years that does not need this service! Even ones with under 150,000 original miles.
Kent delivers a very detailed 24 minute video on understanding how this valve works and how to fix it if possible. You will learn how to recognize a valve that is just too worn out to repair. No bleeder valve repair parts are available and there is not way to DIY fix one if it is badly damaged.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
Version 4 update 2/22: New color and style but still does the same job. This is one of the key tools you will need to remove stubborn pre chambers from the cylinder head of your old diesel engine.
These are not Mercedes specific although some will work well in certain places on older Benz. This is a general purpose assortment that can be used on many vehicles. Handy to have in your garage.
In this 30-minute instructional video, Kent will explain how this new pump compares to the original, what is included in the kit and why, how to make a new plugin wiring harness, demonstrate step by step how to install this pump in a late W123 and explain the differences you will face when instal
Since the original style Bosch electric pumps are no longer available, Kent decided to come up with a good alternative.
Study the picture carefully. This is exactly what you will receive. Only one available
Used seat track hardware as shown.
In this instructional video, Kent demonstrates how easy it is to install the Klima heater control valve ( monovalve replacement ). If you have one of these popular and classic Mercedes, this is the best upgrade you can make for your climate control.
This an instructional "how-to" video that comes with our ACCIII performance upgrade it. It will show you how to install a protective fuse for your auxillary water pump and how to replace the rotton foam climate control hose under your dash. Total run time is 16:29.
Maybe your non-turbo automatic shifts just a little too early or a little too late? Maybe your turbo diesel transmission jerks a little too much or flares during shifts?
In this video Kent will show you how to remove the center wood panel and the climate control switch panel so you can replace the 5 small bulbs behind it that light up the switch panel and the buttons behind it. It is not as difficult as it may first appear if you understand the procedure.
Since the original style Bosch electric water pumps are no longer available NEW. If you need a replacement pump, you have three options. 1. Buy a used pump. 2. Buy our newer pump conversion upgrade. 3. Take your inoperable pump out of the system.
Very good condition. Does not have all the corrosion that you see on most of the bulb sockets. If you are have problems with your rear lights staying on this is usually the problem. New bulbs are available separately.