April is fuel injection month. We may have a few injection products on sale. CLICK HERE to view all sale items.
In this detailed 22-minute video instruction, Kent will show you how to use his kit to perform a power drain on most 1965 to 1995 automatic transmission.
Yes, YOU can fully drain all your transmission without using any type of "power flush." Full detailed video instructions are included. This kit is easy to connect and the process is quick and clean. Watch Kent's YouTube video below for full details.
For the past 20+ years, we have promoted H4 headlight upgrades for these old Mercedes. The original sealed beam headlight bulbs lacked light output, and we found them sometimes downright "sketchy" on dark roads, especially when deer were known to be present.
You will receive ten each of the following sizes: 8/12, 10/16, and 12/22. These are much better than U.S. style hose clamps that cut into the hose.
Kent shares with you 3 key steps that you should consider doing to get your old fuel injected 6 and 8 cylinder engines running properly. These include:
These require removal of the batter and possibly the brake booster to replace. They are split so you do not need to remove the sway bar. Plan to replace if doing work under the battery box area. Battery acid is hard on the right side.
These will no longer be printed when these are gone. They will still be available as a download. All books are signed by Kent. This is an end of an era for us. Most books are approximately 15 pages in length and covered with heavy clear plastic.
This kit has enough red clips (60) to do both sides on the 123 240D, 300D, 300TD, 300CD, 280E, and 280CE. You will receive the best tool to remove the side trim and the best tool to remove the old red clips from the side trim after removal.
RUST-FREE and damage-free passenger-side front fender, as shown. ALL original light silver blue paint. No rust and no previous damage from being hit.Some peeling of the paint on the top edge due to torch heat to melt the glue they used to at the factory.
You can not believe how easy it is to move and adjust your old seat after lubrication the tracks with this amazing lubricant! You will receive two full tubes plus the extension nozzle. This is more than enough lube to do the seats with four tracks on each side.
These quality 6.5 inch wire cutters are made of special steel, the blades are high-frequency hardened steel. Suitable for cutting soft copper wire, plastic wire, small cable, aluminum wire, soft alloy wire, jewelry making, multifunctional manual edge banding pliers.
In this 15-minute video, Kent will show you step-by-step how to safely remove the Bowden cable without damaging it and how to install it to get the proper connection. This is not as easy as it looks, and you can break it if you are not careful.
In this 9-minute instructional video, Kent explains how to set up his injection pump cleaning and testing kit ( available separately ), and use it to clean out old fuel injection pumps of gum and grime, and then how to test them to make sure they are delivery fuel through every line.
You attach these to your 200D, 220D, 240D, or W201 190D engine and turn the engine over with the starter motor for cleaning and testing.
We know you will be very happy with the quality of these plastic headlight surrounds!
It has been over 30 years since the last Mercedes with Bosch C.I.S. fuel injection was manufactured. If you own a 1976 to 1993 Mercedes gas engine with this type of fuel injection, you may have difficulty finding someone to work on your car. In some parts of the country, it may be impossible.
Flushes Out Old Grease and Repacks Bearings with Less Mess. This Handy Packer works on bearings up to 3 1/2" O.D.
Excellent quality zinc plated hose clamps as shown. These can be tighten with a straight blade screw driver or a 7mm socket or nut driver.
Kent is a firm believer in using these strong magnets inside a transmission pan to help extend its useful life.
They should be placed toward the rear of the pan as shown in the picture below.
This is an excellent replacement if yours has melted and deformed.
The MOST little known and often overlooked part on the OM617 engine! And when it fails it can affect your engine cooling temp.
Many of these, especially along the bottom of the hard are hard and brittle and will break when removing the panel. Tilt and twist to remove and install in the holde. Sold in a bag of 24.
In this 17-minute video instruction, Kent walks you through the steps to install his door liner kit using thick, clear, and high-quality plastic sheets on both front and rear doors. A W123 sedan is shown here, but the principles are similar for other chassis.
If you own an older Mercedes sedan or wagon, it is a very good idea to remove all four door panels, repair components, clean drains, and, most importantly, lubricate all moving parts, as Kent explains in numerous YouTube videos.
SAVE BIG! These critical front suspension parts will restore the factory road feel on your old 123. Watch the video as Kent will explain what they are, where they do, and what is involved in replacing them.
This is the actual panel you will receive. Notice the empty cutout for the A/C temperature control wheel.
Reads English on one side and German on the other.
These transmission pans get "out of shape" due to over-torquing the bolts. That crushes the stops (see below), and when that happens, it is very hard to get the pan seal not to leak. Your best option if you are doing a transmission service is to replace the pan.
Also works on 380SL and 560SL transmissions. Before you think you can easily remove the Bowden cable from the transmission, watch the video below.
These transmissions are now 40+ years old, and with age comes hardened o-rings and seals, leading to what I call "pesky" leaks. They are not bad enough to flow on the ground, but they do leave wetness around the transmission and drips on the garage floor.
These transmissions are now 40+ years old, and with age comes hardened o-rings and seals, leading to what I call "pesky" leaks.
New left AND right side upper control arms. They will fit ALL W116 chassis from 1973 to 1980 ( except 6.9 ), and ALL W123 chassis sedans, coupes and wagons from 1977 to 1985.
You must drive this star bit into the head of the damaged bolt with a hammer, but it will hold. The bolt will then need to be replaced. Watch the video below as Kent will explain how it works.
For mount kits and hardware, see related products below.
30 light bulbs total in this assortment. PLEASE NOTE: These may not be every bulb you will need for every model, but you will have extras on hand. These cars are OLD, and most of the bulbs need to be replaced. They even start to loose some of their intensity over time.
Only two available. This is a complete kit. Aftermarket new plastic breather tube with short rubber attachment elbow. the LONG RUBBER CONNECTOR IS USED. PLEASE NOTE: The rubber is still soft and usable.
High quality fast break in pads with special coated anti-squeal pad bonded to the back side of the pad. We include 4 new sensor wires and a small ceramic brake pad grease to lube the pad edges and the pins. ( no need to lube the back side).
This will be instructional information that you can not find anywhere else! The focus of the 25-minute video will be on removing and replacing the oil cooler thermostat once the oil filter housing is removed for a 1977 to 1985 engine ( excluding the 190D).
Want to find out if your oil cooler thermostat is working correctly? In this 22-minute video, Kent will take you through a test sequence that you can perform in your garage. Please note that this video DOES NOT include details of removing or replacing the oil filter housing.
For 300D, 300CD, 300TD, and 300SD built in those years. This thermostat has a very limited supply. You might want to purchase while still available. There is NO substitute.
Set of two new aluminum washers as shown.
Getting that oil pressure line off the bottom of the oil filter housing on the 1977 to 1985 240D, 300D, 300TD, 300CD, and W116 300SD is tough. If you break the line or damage the nut, this part is no longer available new.
Finding W116 front seats in even half of this condition is almost impossible. These are amazing for the age. No rips, tears, worn spots, and solid padding. These came out of a 300SD with only 130,000 original miles and have been in storage for ten years.
This OEM thermostat from another engine fits perfectly in the OM617 diesel engine. It does require a special rubber seal, which we include here.
Here is an easy DIY tip to repair a broken vacuum hose nipple on your main vacuum line running from the vacuum pump to the brake booster on the older diesel engines. $2TIP
This video applies to both K-jetronic and KE-jetronic fuel injection engines on Mercedes from 1976 to 1993.. Let's say you just acquired an old gas engined Mercedes and you just can not get it to run right and or even get it to start.
Excellent used prechamber as shown. pre chamber
Nice to have a few extra 13mm sockets around. This is the first tool that gets lost when working on old Mercedes. The tall shoulder inside helps to hold the nut or bolt in a position to make it easier to start the threads.
Think age here. Many of these shifters on our classic Mercedes are starting to get loose inside the shifter, and when the old bushings fail, you will get a lot of slop side to side when you shift between gears. Note: These bushings are different from the bushing that go on the shift levers.
If your front seat fore and aft adjustment handle is cracked or broken, we have the right replacement upgrade for you, which is stronger and more comfortable to pull on. This is a beginner DIY job on most seats. You cut and chisel the old handle off and bolt on this new handle.