JUST ARRIVED! German-made diesel fuel injector nozzles are back! CLICK HERE to order.
This size freeze plug fits almost all gas and diesel engines from the early 70s up into the 90s. This includes all 61x and 60x diesel engines, the 103 gas engine in the 190E, 300SE and 300E. It also fits many V8 engines but you should measure your current plug to be sure.
If you plan to change coolant hoses this is a must-have labor-saving tool. These are cleverly designed tools. I could not have done it better myself. I actually use to make a couple of different types before I found this set.
This removable threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening. Extremely important in critical engine and suspension parts.
IMPORTANT NOTE: We do not sell replacement antenna masts by year and model. We have run across too many problems with confusion, interchangeability, and previously swapped antennas. We sell a SMOOTH TAIL mast and a TOOTH TAIL mast.
2007-12-05ALERT! Before you replace your suspected failing brake booster you might want to change the o-ring seal between the master cylinder and booster first.
Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India. Pin sizes: 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''
Fits 1968 to 1985 108, 109, 107, 114, 115, 116, and 123 chassis all models.
New old stock aftermarket part. Fits mid 70s to 1979 model diesels with York-style air compressors.
PLEASE READ CAREFULLY BEFORE ORDERING!
Brand new Genuine OEM hubcap clips for Chassis 108 114 115 116 107 123. Sold in a set of FIVE.
These will fit the standard 14 inch round hubcap on all chassis listed above.
This is a great kit for your 350SL, 450SL, 450SLC, 380SLC, 380SL, and 560SL from 1972 to 1989. It also fits all W114 and W115 Sedans and Couple both gas and diesel from 1968 to 1976. Brand new UPPER control arm inner bushing repair kit.
Brand new upper ball joint assembly with hardware. Fits all 114 115 Sedans and Couple both gas and diesel from 1972 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Replacing the upper ball joint is not a do-it-yourself job.
This is a great kit for you 114 and 115 owners. Fits all Sedans and Couple both gas and diesel from 1968 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Brand new set of 2 lower ball joints. This is not a do-it-yourself job.
This is a great kit for you early SL and SLC owners. Fits all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. If you are getting a lot of body roll in the turns this kit will really tighten up the front sway bar.
This 5 piece set is made out of plastic so it will not mar or scratch paint, glass, chrome trim, etc.
New Bremi distributor rotor fits models listed above from 1986 to 1991. Check yours now for heavy burn marks or arcing.
New Bosch distributor cap fits models listed above from 1986 to 1991. Check yours now for cracks or arching.
Yes, with age they can leak from the inside out ever so slowly. Replace before they fail! This is a great upgrade that fits most models from early 70s up to mid to late 90s. The wire protector on these hoses will prevent chaffing especially from loose V belts.
Fits all models from the late 1960s up to the early 1990s that use a contact grounding spring inside the front hub bearing grease caps. Sold as a set of two (2). This important copper spring provides a clean contact to ground for the brake pad sensor wire.
Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.
Fits all Mercedes models with 14" steel wheels. Here is one brand new lugbolt. Good to have on hand as most spare tires are mounted on steel rims! Make sure to never use the lug bolts from alloy wheels on your steel wheels! The measurements are M12 x x1.5mm with a 38mm overall length.
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five brand new silver lug bolts.
New Hood Release Cable. Fits all 107 chassis SL convertible and SLC coupes from 1972 to 1989. 350SL, 450SL, 450SLC, 380SL and 560SL
Fits all GAS ENGINE exhaust systems for W107, W116, W126, W124 and W201 chassis from 1972 to 1995. Gas engine exhaust systems are generally heavier and run hotter than diesel engine exhaust systems. This is a wider and more heavily reinforced exhaust hangar than the standard round type.
This part controls the function of your backup lights as well as the starter motor lock-out if you do not have the transmission selector in park or neutral. It is called the neutral safety switch and fits all 107, 114, 115, 116 and 123 chassis to 1981 (except 81 Turbo wagon).
Replace your old worn and weak expansion tank cap to eliminate minor coolant loss problems. Watch the video below as Kent will explain the difference in caps and why you want to make sure you purchase the correct one.
Set of (2) new rubber hood stop buffers to adjust the front corner closing of our hood. You will normally see the rubber ends missing, hardened or cracked. Replace and properly adjust for better hood closure. Fits all models that use stop buffers from 1963 to 1993.
This is a brand new 3 way Vacuum change over valve. It is located in the engine compartment on a number of different chassis Mercedes, both gas and diesel models, from the 70s up through the late 90s.
This "permanent" red threadlocker is probably the best that I have used. It has the best sealing cap and cures rapidly and reliably when confined between metal parts. Use it to lock threaded fasteners, nuts, bolts and screws from loosening.
Helps to delete those annoying water leaks into the trunk. Brand new quality trunk seal for your SL. Stop or prevent those trunk leaks now. Includes video instructions and recommended glue.
Fits the Following: ALL 107, 108, 109, 111, 113, 114, 115, 116, and 123 chassis gas or diesel models. Here is a set of (4) hard to find Parking brake shoe springs. Have you ever had one of these go flying upon removal and have not been able to find it?!
For those of you needing extra fiberglass cloth for your rust repairs, we have put together an ideal kit of the most commonly used types of cloth. These are the types that work best with Miracle Paint.
This kit fits many models of Mercedes from the late 1970s up into the late 1990s (see list below). Pump problems abound and when you change the pump you are much better off to change the old rubber seal and brittle washer braided hose at the same time.
FITS THE FOLLOWING models listed below: Includes illustrated PDf instructions on replacement. Includes both a new filter and pan gasket to do complete service on your transmission. Consider replacing your old pan to prevent leaks.
If your steering is feeling a little weak or mushy replace the steering shock absorber. Easy to install on the cross steering link with only two bolts. It comes with instructions for easy installation!
Here is a brand new set of four exhaust "donuts". Check your existing rubber hangers on your exhaust. If they are cracked replace them before you lose your mufflers! If your exhaust is rattling, these should fix the problem. Fits all chassis models 108 107 113 116 123 126.
FITS THE FOLLOWING: all 107 chassis from 1973-1991.
FITS THE FOLLOWING: all 107 chassis SL and SLC from 1972 to 1989.
Fits all 114 115 116 107 123 124 126 drivelines 1968 to 1993.
Fits all W116, W123, and W126 Turbo Diesel 5 cylinder 300D and 300SD engines from 1981 -1985 as well as M110 6 cylinder engines from 1977 to 1985. This is a brand new Lower engine Oil Pan and Gasket. Remove and inspect your oil pan if it has been badly dented.
Fits all 123 and 126 chassis and later R107 as noted above - both gasoline and diesel models. It may fit a few other models as well but you MUST measure your old hose before ordering. We also carry the 15mm hose for most of the older models. See related products below:
FITS THE FOLLOWING: all 116 300SD from 1978-1980, R107 chassis from 1977 to 1989, 123 chassis both gas and Diesel from 1977-1985 and 126 chassis both Gas and Diesel from 1981 to 1991. Also 124 Chassis 260E 300E 300TD 300D 2.5.
ALERT! ALERT! 10 years after I first started warning about this, I saw it again in my shop on Feb. 20, 2011. Seems to be happening even more now as these radiators age. I loosened up the upper hose clamp on this 123 300TD radiator and it just fell off.
FITS THE FOLLOWING: All models PON, FIN, P55, 110, 111, 112, 113, 108, 109, 114, 115, 107, 116, 123, 124, 126, and 201 chassis. Here is my all time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!).
This is a great gift for the older Mercedes Benz Enthusiast! Sold in increments of $25. This gift certificate can be toward the purchase of any item or items on our website .
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!
Fits later 107 and 123 as well as 126, 201, and 124 chassis oil caps (black plastic). Tired of having a hard time getting your oil filler cap off without using pliers. Or are you tired of the unsightly oil leaks around the cap. These gaskets can help solve those problems.
Fits 113, 111, 108, 109, 107, 114, 115, early 107 and 123 chassis: Tired of having a hard time getting your oil filler cap off without using pliers. Or are you tired of the unsightly oil leaks around the cap. These gaskets can help solve those problems.
Sometimes you need the extra heat! Like when replacing heater motor brushes.
FITS THE FOLLOWING: 114, 115, 107, 123 and 126 to 1985 chassis Mercedes that use the rear axles with the crimped sealed cans over the flex joints (spider). Mercedes rear axles of the 1970s and 1980s are extremely robust.