New Genuine OEM Mercedes o-ring as shown. Always replace this seal when removeing and cleaning your fuel tank strainer ( screen ).
PLEASE NOTE: Possible shipping delay. This is a special-order item and may take up to 7 days to ship! Why change K-jet fuel injectors when "they are working?" Why change shocks when they feel like "they are working"?
This 25 minute video will instruct you on how to replace the fuel injectors in your 1976 to 1980 8-cylinder M117 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
PLEASE READ BEFORE ORDERING: The plastic injector holders are no longer availabe. The video instructions will show we include them in the kit so PLEASE disregard. You will have to use your old holders and install the new green seals we include.
This 33 minute video will instruct you on how to replace the fuel injectors in your 8-cylinder M116 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
This 16-minute video will instruct you on how to replace the fuel injectors in your 6 cylinder M110 safely and efficiently. Since this is a fairly straight forward remove and replace this is not a step-by-step video.
This is every thing you need along with free video instructions by Kent Bergsma. Why change the K-jet fuel injectors in your M110 engine. One thing is they are very old. Second this is right now they are readily available and resonably inexpensive.
380 engines tend to run hot. As long as it is not too hot it won't hurt the engine but that extra heat is not kind to rubber and plastic parts.
Why change K-jet injectors when "they are working?" Why change shocks when they feel ike "they are working." The deteration is very slow over time and you may not notice the difference in how the engine starts, runs, accelerates, and delivers mileage until you do this service!
Upgraded top seals for better and longer-lasting sealing properties and well as standard green seals for the bottom of the injector holder. With these seals you can clean and reuse your existing fuel injector holders / sleeves.
Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up. Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.
Is your old gas engine running a little rough? There could be lots of reasons for this but if you have good compression, good plugs and wires you might consider replacing your O2 sensor even if your warning light is not showing up. This is an easy DIY job.
This is a part that hardly ever gets changed, and it is an easy DIY job if you can access it under your Benz. Make sure your model fits those described and has an O2 sensor installed. You can confirm that by the existence of an o2 sensor warning light on your dash.
This fits all Mercedes V8 engines listed in the title from 1981 to 1991 including the sedans, the SL and SEC models. I compare fan clutches to shock absorbers. They wear out slowly over time and you don't feel or see the difference until you actually replace it with new.
In this 13 minute instructional video Kent will demonstrate how to remove an old fan clutch and replace it with a new one on a 1983 380SL This is a beginner D.I.Y. job and no special tools are required. This video is included free of charge with the purchase of our Later V8 fan clutch kit.
In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles
Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.
This kit includes:
These have been inspected for good hex heads and for abnormal thread stretch. Threads will need cleaning before installation. Always use liberal blue thread locker when installing.
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.
Planning to replace the head gaskets on your older v8 engine. You should have this tool on hand before you start. You don't think so? Watch the video and then decide.
This replacement part that we make here in our own shop is built stronger with a solid core pin so it will not break off like the originals ( See 560SL wood below for reference ). The original is only stapled on and is prone to fall off with age.
16mm I.D. - MADE BY COHLINE. 1976 to 1989 107 SL. WITH CIS FUEL INJECTION. Also fits late 1976 to 1980 450SE and 450SE as well as W123 280E and 280CE with 16mm hose. Connects to bottom of fuel tank and drops down to fuel damper.
In this 30-minute instructional video, Kent will explain how this new pump compares to the original, what is included in the kit and why, how to make a new plugin wiring harness, demonstrate step by step how to install this pump in a late W123 and explain the differences you will face when instal
Since the original old style Bosch electric pumps are no longer available, Kent decided to come up with a good alternative. He went to work to adapt the newer style pump found on most Mercedes of the 1990s.
In this instructional video, Kent demonstrates how easy it is to install the Klima heater control valve ( monovalve replacement ). If you have one of these popular and classic Mercedes, this is the best upgrade you can make for your climate control.
This an instructional "how-to" video that comes with our ACCIII performance upgrade it. It will show you how to install a protective fuse for your auxillary water pump and how to replace the rotton foam climate control hose under your dash. Total run time is 16:29.
This can be used on older 4, 6, and 8 cylinder gas engines up to around 1991 (end of W126). This works particularly well on the M116 and M117 V8s from 1972 to 1991. On some early V8s, you have very limited room to get to the rear sparkplugs. You can use the short extension.
The parts in this little kit will do two things. 1. Protect your climate control push button panel. 2. The system will get more accurate readings from the climate control sensor on top of your dash.
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five USED wheel bolts that are not all rusty. Recommend you clean. (Dawn dishwashing soap) And paint them silver before installation.
These are not show quality but look ok from a distance. They have light facial scratches, but all the back side springs and clips are fully intact and hold tight to the wheel. FITS ALL models with 14-inch alloy wheels from the early 1970s to 1985 with the bundt cake style wheels.
Key lost or will not turn in your ignition switch? Is it panic time? No, you do not need to get a big drill and try to drill out the tumbler. That is the worse thing you could do!
Why do you need to do this? Valve clearances are supposed to be adjusted on these early V8s every 10,000 miles. You can imagine why this does not get done! Add to the fact owners can not find the right information or tools and it makes neglect even worse Why not on later model years?
Custom order item. Expect 3 to 5 day delay before we can ship. NEW Bosch reman as shown. You will need to use the front pulley and fan assembly off your current bad alternator..
Blue in color. Very good condition as shown.
Sold as a set of two for the right and left side. Either one can be used for either side, but if the bend goes down, it is easier to operate. See the picture below to compare it to the original. We think this one works better due to the offset and the longer handle.
Good used working right side mirror and hardware as shown. It is not perfect so if you are looking for show quality then do not purchase. The rubber surround is very good, with no gouges or wear spots. The chome is good, but then is a very small indentation where my finger is pointing below.
Please note that this video class is included free with the purchase of one of our remaining new 450SL or 380SL steering lock assemblies.
We starting using some of these to plug brake lines while changing out calipers. Then we started using them on fuel and oil hoses. Now we are using them all over the place and keep finding new uses for them on a monthly basis. These are a MUST HAVE! Watch the video below to become a believer!
After years of wearing out his shoulder and elbow joints trying to hand polish convertible top windows, Kent finally decided he had to use some fast-action power tool. The idea for this kit and the included tool came from developing and using his aluminum trim polish kit.
PLEASE NOTE: This puller is custom-modified and is made to order. It has to be narrower than the diesel version. PLEASE allow three to four days before it can be shipped to you.
Valve clearance adjustment should be done every 10,000 to 12,000 miles. Recently emails started coming in - "we can not find any valve adjustment tools for our earlyV8 - help!" Most companies are currently noting the old factory-style tools are no longer being manufactured, so we went to work to
a small clip that attaches to the forward end of the power sunroof cable. When you damage or lose this one. Here is your replacement...
Cad plating can be expensive but is great for show restorations. If you just want to make those parts on your old Benz look good then this is the closest paint Kent has found to looking like cadmium gold plating. Check out the pictures below of the fuel delivery brackets he did with this paint.
This is a quality aftermarket part and an excellent alternative to a used one. New O.E. is no longer available.
You do not need a $100 plus multimeter to test most automotive electrical components. But you do need one that is very accurate and easy to read. This is especially true when testing D-jetronic and K-Jetronic fuel injection.
To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.
These are the best wires you can get for your 1981 to 1985 380SL 380SLC 380SE 380SEL 380SEC and 500SEL. The coil wire is included. Consider replacing your cap, rotor, and CORRECT spark plugs at the same time. See related products below:
In this video, Kent will show you how he fixed his leaking tires on his chrome alloy wheels by using Miracle Paint. This is a full 22-minute step-by-step instructional video. Watch the video "trailer" below to give you a better understanding of what is involved in this procedure.