JUST ARRIVED! German-made diesel fuel injector nozzles are back! CLICK HERE to order.
Keeping your throttle linkage ball sockets and pivot points lubricated extends the life of the parts and maintains top performance for the engine as well as some of the later transmissions.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
If your 1973 to 1980 450SL or SLC or 1977 to 1980 W116 280SE, 450SE, and 450SEL key is stuck or is sticking, this may be your only option for repair! New Genuine tumblers and key assemblies for these cars are no longer being made. New O.E.
For a number of maintenance operations, you need to be able to turn the engine over by hand. This includes valve adjustment, timing chain replacement, injection pump timing on diesel engines, checking and setting internal engine timing, draining the torque converter, and others.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
This is not a complete instructional video on how to "overhaul" the M116 and M117 D-Jetronic fuel injected V8 distributor. There is lots of information out there on installing new points, setting the dwell and timing, replacing the cap and wires, etc.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
PLEASE NOTE: Manual(s) are now available in PDF format and are available for viewing when you log into your account at Mercedessource.
PLEASE NOTE: Manual(s) are now available in PDF format and are available for viewing when you log into your account at Mercedessource. No printed manuals are shipped. If you own a Mercedes with the M117 V8 engine timing chain failure can really ruin your day!
Learn all the tricks to adjusting the valves on your older Mercedes V8 engine.
PLEASE NOTE: This is NOT a complete instructional video on how to install a new timing chain in a 1970 to 1991 M116 or M117 Mercedes V8 engine. Rather it is a collection of "tips" to help you prevent running into trouble when doing this job yourself.
In this video, Kent will walk you through some initial steps you can take to try to solve a rough running problem on an early Mercedes V8 engine with D-Jetronic fuel injection. Please note that this is an introductory troubleshooting video. It does not contain any actual repair information.
For all 3.5, 3.8, and 4.2 liter V8 engines from 1969 to 1991 280SE 3.5, 300SEL 3.5, 380SE, 380SEC, 380SEL, 380SL and 420SEL. These THREE are the upper (and easily accessible) plastic guide rails that most often break due to age and heat.
PLEASE NOTE: Manual(s) are now available in PDF format and are available for viewing when you log into your account at Mercedessource.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
New O.E. cap as shown. Alert: These are almost out of production.
Exceptionally nice set of high-performance spark wires as shown. These should be replaced approximately every 80,000 miles for peak performance.
If you are a 1969 to 1991 V8 you should have some extras of these on hand. They are inexpensive and should be replaced anytime you remove your valve covers. The gaskets will keep a good seal longer than the bolt washers.
These will fit all 1976 to 1991 4.5, 3.8, 5.0 and 5.6-liter V8 engines with Bosch C.I.S fuel injection. PLEASE NOTE: These spark plugs have an aluminum end cap that does screw off. You will receive the plugs with the end cap installed.
These will fit all 1970 to 1975 3.5 and 4.5 V8 engines with D-Jetronic fuel injection (electronic). Do not use off-brand, platinum or any other "special" spark plug.
One of the most often neglected easy and inexpensive maintenance items I see on gas engines. Why do people think that spark plugs will last forever or that it doesn't matter what type of plug is used! Aren' they all created equal?
This is a VERY common maintenance item on the older Mercedes V8 engines. If they are too old they will leak. If they are not put on properly they will leak. If you do any maintenance (ie, valve adjustment, clip replacement, timing chain, guides, etc), you should have this kit on hand.
You can not believe how many problems Kent has seen over the years as a result of the camshaft oiler tube falling off inside the valve cover! It is held on by inexpensive small plastic clips and guess what happens after 15 to 20 years? Yes, that is correct.
Kent will show you the proper way to remove and replace a V8 valve cover gasket so you won't have oil leaks after installing a new one. This is a common maintenance item.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Works on W114, W115, R107, W116, W123, W126, W201, W124, W140, R129 as well as most of the models through the 2000s. will 14mm hex plugs. This wrench is used when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
This video will show you to details on how to use Kent's custom rear end and manual transmission drain plug wrench. These 14 mm plugs were used on almost all manual transmission and rear ends from the early 1960's up to the mid 2000's.
If your early door lock actuators do not have any cracks in the rubber diaphragms, but they just won't hold vacuum - it may be possible to fix them by taking them apart and cleaning and resealing the outer lip of each diaphragm.
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
Over the years I have used lots of different methods to clean off rust before applying Miracle Paint. This is the best and quickest method I have found. This is a great tool that can be used for many other things like cleaning off brake hubs and rotors.
DOES NOT INCLUDE HOOD PAD --- This special glue is not easy to find and the price has recently fluctuated drastically since 2021.This kit includes what you will need to successfully install a new foam hood pad in your older Mercedes.
This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.