Search | R107

Displaying 451 - 500 of 575
$16.50

Brake Lubricant

Stop Pad Squeal

Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products.

$9.95

Loctite Hi-Tack Stick

Gasket Dressing; Holds Gaskets in Place; 19g Stick

Unique wax like stick works like Loctite Hi-Tack liquid but without the mess. It is low odor and solvent free. Sets quickly to a very tacky film and seals and holds the heaviest gaskets in place. Resists gasoline, oil and common shop fluids.

$8.55

Loctite Locweld Bonding Compound

Cold Weld; 2 Part Adhesive/Filler; 2-1oz Tubes

Cold Weld sets up in 15 minutes and has a test proven strength greater than 3000 psi after 16 hours. Resistant to most shop fluids including: water, diesel, fuel, gasoline, antifreeze, hydraulic fluids, motor oil, and transmission fluids. Can be drilled, filed, sanded, machined and painted.

$24.95
Currently out of stock.

Battery Tender (Trickle Charger) Installation Kit

NO LONGER AVAILABLE. Please see related products below for our premium upgrade of this charger kit.

This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.

$12.50

Early Steering Box Adjusting Stud Replacement Locknut

Fits most models 1969 to 1995 -

This is not a normal nut. On the face it has a special hard plastic nylon seal. When this seal deteriorates you may see evidence of power steering fluid seeping out of the bottom the the adjustment locknut (located on the top of the steering box).

$24.50
Currently out of stock.

Click-Stop 3/8 Inch Drive Long-Handle Torque Wrench and Case

Perfect size for torquing spark plugs and other important engine components.

This is a very handy smaller torque wrench to have in your toolbox. Perfect for spark plugs. It will do fuel injectors but is not quite big enough to torque wheel lug bolts. Range is 5 to 80-foot pounds. The case will be black rather than red.

$3.99

Maintenance-Handy Pick Tool Set

Small enough to get into tight places - i.e. brake clips and heat shields

Nice set of pick tools with plastic handles. They have strong steel tips which allow for more prying and twisting with less tendency to bend the tips as you would with dental pick tools. Note: Quarter is not included! Shown for size reference only

$29.50

Engine Crank Rotation Adjustable Length 1/2 Inch Drive Ratchet Wrench

Rotate Engines on 220D 240D 300D 300CD 300TD 300SD 300SDL and all V8's from 1970 to 1991 - Extends to 18 inches long!

This is Kents new favorite ratchet wrench for turning engines over during service and repair. There are a number of maintenance procedures that require you rotate the engine over by hand.

$16.75

Axle Shaft Seal

Final drive seal (45 x 65 x 11mm)

Fits Mercedes Benz:

$2.75

Service 10 mm Head Size Locking Nuts ( Set of 10 )

Common size on all Mercedes

Replace those nuts that keep loosening up with nylock metric nuts that just won't come off. Inside the door panel on the window regulators. Around the engine compartment. Air filter housing nuts. etc. etc.

$675.00

1977 to 1981 ACC II Climate Control Servo Replacement - Modern Electronic Upgrade

Written instructions are included. Extra on-demand videos to help you understand the ORIGINAL are included at no extra charge ($25 value).

For US Models 116, 107, and 123 from 1977 to 1981 with Automatic Climate Control (Vertical Push Button Panel). New for 2023. Easy installation and excellent temperature regulation!

$22.75

Fluid Maintenance - Radiator and Fuel Hose HD Pinch off Pliers

A must when changing rear mount fuel filters and pumps. Best tool for secure clamp-off in tight locations. Works on fuel hose, coolant hose and even big radiator hose.

I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places.  Many do not stop every last drip from coming out of the hose.

$6.95

O-ring Removal Fine Point Pick Tool Set

Best set Kent has found to remove orings in hard to get to locations

This set of 5 pick tools have very thin and sharp points. Best set Kent has found to remove orings in hard to get to locations. The variety of angles available allows you to get into almost anywhere to remove and o-ring, sealing ring or other small part.

$28.95

1/2 Inch Drive Clicker Torque Wrench 20 - 150 Ft. Lbs.

A must have for any DIYer. Especially diesel fuel injectors and wheel bolts!!!

If you are going to work on your diesel fuel injectors, you are going to need a torque wrench. If you are going to tighten your alloy wheel lug bolts properly, you should use a torque wrench. In fact, if you do your own work, you should have a 1/2-inch clicker torque wrench in your toolbox.

$14.95

Engine Coolant Temperature Sensor

SINGLE pin - located on left side of cylinder head by glow plugs on 1977 to 1985 OM616 and OM617 Diesel engines.

New coolant temperature sensor for most Mercedes built from 1973 to 1993, Gasoline and Diesel models. Many gas models it is located on top of the thermostat housing. Sends signal to engine coolant temperature gauge on the dashboard. These are getting harder to get. Single pin

$26.50

M116 and M117 V-8 Engines Oil Filter TWIN PACK

R107 W116, W126 V8 Model years 1973 to 1991

Quality German oil filter quantity of 2. For 450, 380, 500, 420, and 560 engines.

Easy to replace. You do not need to get under the car. Access to the lid is on the right side of these engines just below the forward section of the valve cover.

$2.49

Fuel Tank Sending Unit Oring

280SE 240D 300D 300CD 300TD 300SD/L 380SE/L 420SEL 560SEL 560SEC 350SL 450SL 380SL 560SL

New Fuel tank sending unit o ring. If you need to remove your sending unit to test or clean, it is a good idea to replace o-ring.
Fits 116 107 123 and 126 Chassis from 1977 to 1991.

$12.95

Maintenance - 10 Inch CURVEDLocking Clamp Plier - Injector Return Hose Tool

Lets you reach into tight places - very long nose curved pliers with teeth - like hemostat

This is one of Kent's favorite tools. Lets you reach into tight places - very long nose curved pliers with teeth - like hemostat. With the locking handles it is amazing what this clamp / pliers can hold - and the tight places it can get into!

$20.50

Early Chassis Power Steering Replaceable Filter

Fits 110 111 112 113 108 109 107 114 115 116 Models with Power Steering Listed below

January 2019 notice: This filter is now available only in very limited quantities and may not be readily available in the future. This is why we are not able to include it in our full fluid flush kit ( See related products below) This is an often neglected filter.

$39.50

123 126 201 107 Hazard Flasher switch

VERY LIMITED INVENTORY!! All above chassis Gasoline and Diesel from 1982 to 1991

Brand new Hazard Flasher rocker type switch, located in Center console between window switches for 240D 300D 300TD 190E 190D 300SD 420SEL 380SL and other models from 1982 to 1991. If you are unsure it will fit your model, visually verify picture with existing switch.

$9.25

107 115 116 123 126 Jack Hole to Floor Jack Adapter

Also W201, W124, R129, W140, W208, W210, W215, W220 - Allows use of floor jack to raise car from factory jack points

I like the convenience of using the factory jack points (holes) but I absolutely DO NOT like using the factory jack - except in cases of emergency road side repair. You all know it can be a little unstable... I solved this problem by using a large heavy duty bolt.

$147.00

Late 107 116 Chassis Turn Signal Switch Assembly

Order only by Vin # as explained below

Description: For late 450SL, 450SLC, 450SE, 450SEL as noted below. Fits ALL 300SD 1978 to 1980. Please note that the cruise control lever is not included. You will use that from your old unit. No instructions but easy and straightforward to install.

Mercedes Benz 450SE

$9.95

Engine and Component Assembly Lube

Lubro Moly Brand

High quality lubricant to be used when assembling bearings in engines or in components that are oiled by engine oil. This WILL prevent scoring and wear upon initial start-up after overhaul.

$6.95

Automatic Transmission Nylon Shift Bushing Set of 2

For LATE MODEL (70-73) 108 109 and ALL 114 115 107 116 123 126 201 124 129 and 140 chassis 1968 to 1995

Set of (2). The number one cause of a loose or rattling shift lever is failed or missing shift lever bushings. Our upgraded bushings are made out of nylon and are much tougher than the original plastic type. No instructions or special tools included.

$21.95

Late 114 115 and 116 107 and 123 126 201 124 Seat Belt Warning Buzzer Switch

Fits most 1974 to 1991 Models with steering lock buzzer switch

Genuine MBZ Part with wiring plug for later models: Please note this buzzer is really for the 1985 and later models. The wiring pigtail is not used on pre-1985 steering locks. The switch itself is the same but for older models you will have to install and leave the pigtail connected.

$14.95

All Models 397 Pc. Metric O-Ring Assortment in Case

Must have for any Mercedes D.I.Y.er

This must-have kit does not only have hard-to-find metric sizing, but the o-rings are made out of nitrile which holds up better to heat and is more resistant to oil, grease, hydraulic fluid, silicone and even water.

$14.95

Non Tilting Sunroof Seal and Glide Replacement Manual

ALL Chassis 111 108 109 114 115 116 123 and 126 to 1985

If you have ever thought about replacing the seals in your sunroof here is a chance to read the manual so you can gauge the difficultly of the job. Seals and other repair parts can be purchased separately at a later date.

$39.95

1981 to 1991 V8 CIS Fuel Injector Plastic Sleeve Holder x 8

For 380 420 500 and 560 gas V8 engines- Top seals sold separately

These are the plastic bushings that hold fuel injectors into the head of the late M116 and M117 engines. These get very brittle with age. If you are planning on removing your fuel injectors I highly recommend you order these to have on hand.

10 Side Trim Clip Replacements
$7.95

Side Trim Molding Clips - set of (10)

For W108 W109 W114 W115 W116 R107 and W123 Chassis

10 red plastic clips are included as shown. There are a number of reasons why you would want to remove the center side trim on your older Mercedes. You may just want to clean and detail behind them (it does get pretty dirty back there over the years).

$88.75

Early 123 Early 107 Late 116 Genuine OEM Ignition Switch

Fits most 1977 to 1979 W123 240D 300D 300CD 300TD,1977 to 1980 W116. and 1973 to 1980 R107 450SL, 450SLC

Get a spare. These will soon be NLA. NEW OLD STOCK Genuine Mercedes Ignition Switch. Fits early 123 chassis up through 1979, early 107 450SL from 1973-1980 and 1977-1980 116 300SD, 280SE, 450SE, and 450SEL.

$9.75

Trim and Rubber Seal E6000 General Purpose Adhesive

Need a strong, flexible glue joint on rubber seals, dash wood, side trim, bumper rubber, etc - this is the best!

Over the years I have used many different products to try to adhere chrome and trim pieces to body and interior panels. None has performed better for me than E6000. Silicone glue can't compete. When dry it holds like nothing else.

$48.50

Bosch Fuel Injection and Engine Management Manual

Theory of operation, troubleshooting and service 1969 to 1995

Some of those early fuel injections systems can be troublesome. If you don't understand the system or how it works you will never be able to troubleshoot it successfully. This manual explains the different comp0nents in the system, their purpose, and how they interact together.

$4.25

Diesel and Gas Early Automatic Transmission Tube Sealing Rings

For 3 banjo bolt connections 1970 to 1980

Some of the most common auto transmission leaks on the early automatics come from the banjo bolts that connect the filler tube to the bottom of the pan and the two transmission coolers lines to the lower front transmission housing.

$48.60

Early Gasoline 107 116 Fuel Tank Outlet Hose

For 1973 to 1975 models with small 12mm inside diameter hose only. Will work on 1971 or 1972 350SL only if you replace the tank screen with the newer style.

This is a very common failure item on the older gas models. The braided outlet fuel hose will rot and and begin by weeping fuel through the hose. When it finally fails it can be dangerous and leave you stranded on the road. Large amounts of fuel will come pouring out of the tank.

$22.50

1976 to 1980 C.I.S. 107 123 All 116 Gas Engine Fuel Filter

For above chassis only 6 and 8 cylinder gas engine 1976 to 1980 - not for electronic fuel injection (D-jetronic)

New Bosch fuel filter as shown. Before ordering please make certain that this fits your Benz. Not all gas fuel filters are created equal.

$36.50

107 116 Early 126 V8 Main Fuel Pump Check Valve

450 380 and 500 V8 Engines Including 6.9 1977 to 1985 ONLY

This check valve is mounted on the end of the electric fuel pump and prevents pressure from bleeding off after the engine has shut down.  If you engine is slow to start after it has sat overnight that could be a sign the check valve needs replacement. 

 

All Model Replacement Gas Cap
$8.95

All Models Gas Cap

Fits all 110 111 113 108 107 116 114 115 123 126 201 124 129 140 early 60's to late 90's

$17.95

Pentosin DOT4 Brake Fluid - One Liter

Higher Performance Fluid - direct replacement for DOT 3 - All Models

WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.

$11.95

Lubro Moly Motor Oil Saver - For Diesel and Gasoline engines

UPS GROUND SHIPPING ONLY!

Another High Quality product from Lubro Moly. This is a 300ml can of Motor Oil Saver. It Rejuvenates rubber and plastic engine seals and reduces oil consumption via the piston rings and valve guides; counteracts the loss in viscosity of motor oils.

$6.50

Lubro Moly CV Rear Axle Joint Grease

LM 47 for chassis 114 115 107 116 123 126 201 124 and 129

Another high quality product from Lubro Moly. This is a 90g tube of CV Joint grease for long term lubrication use. It is excellent for wheel bearings and ball joints as well.

$13.75

Lubro Moly Gear Oil Additive

MoS2 Anti-Friction Anti-Whine for Gears

Another high quality product made by Lubro Moly. This is a 50g tube of Gear oil additive. It is a concentrated moly based treatment for manual shift transmissions, differentials, steering boxes, transaxles, and rear axles. Reduces Gear noise and whine, smooths shifting.

$15.95

Front Crank and Transmission Seal Removal Tool

Helps to remove 616 and 617 Diesel Engine Front Crank Seals and automatic transmissions from 1965 to 1995

If you have a leaking transmission seal it can be a real bear to get the old seals out without this puller tool. It works on both the front and rear transmission shaft seals. This tool also works great for removing the front crank seal on both gas and diesel engines.

$79.50

W107 W126 Chassis 380 V8 Engine Thermostat and Short Hose Replacement Kit

For 380SL, 380SLC, 380SE, 380SEL and 380SEC. When replacing an old thermostat always replace the short hose that it is attached to!

Brand new thermostat, heavy-duty short hose, and 2 new clamps. Fits all 126 Chassis 380 engines from 1981 to 1985 both in 107 chassis and 126 Chassis. Free Video installation tips included ( click on the arrow in the center of the picture to watch below:

Pages