Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
If you are removing and replacing your M110 fuel injectors these are the seals you should have on hand. Always replace the rubber seals. I know it is possible to reuse the plastic sleeves but many times they are brittle and will be damaged upon removal.
In this 9 minute instructional video, Kent will explain how to test your fuel accumulator to determine whether or not it has failed internally. A failed accumulator will make your engine hard to start when hot.
In this 14 minute instructional video, Kent will share with you the tools you will need along with some tips and tricks that will help you successfully remove a prechamber from the cylinder head. This can be done with the head on or off the engine.
Assortment includes 6 single-element brake and turn signal bulbs, 4 dual-element bulbs for the front marker lights, and 4 small tail light bulbs. Good idea to carry this assortment in the trunk of your car.
This is the most complete 1970 to 1975 V8 injector repair kit you can find anywhere.
In this 24 minute instructional video Kent will explain the process of how to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
This will give you everything you will need ( except 12-volt power and cleaning fluid ) to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
Includes Kent's four detailed videos on every aspect of this job! This is our combination kit for DIY installation of a new front crank seal in an OM617 turbo diesel engine. Price if purchased individually is $174.00.
In this 26 minute instructional video Kent will show you how to hook up a CIS fuel pressure tester to your older K-jectronic gas engine.
In this 10 minute instructional video Kent will explain why you want to "jump" your K-jet fuel pump relay, how to do it, how to find the location in you car, and why he prefers to have a long "switchable" jumper.
This xx minute video will take you step by step through the process of modifying your warm up regulator so you will be able to easily make adjustments to your cold start control pressure.
With the required pressure tank you will be able to individually test and clean our D-jet fuel injectors. Along with a 12-volt power source, you will need I gallon of cleaning fluid as described in the instructions.
Assortment of new interior bulbs as shown. These light up your dash, center console, glove box and shifter ( on some models).
Assortment includes the following:
Before you make this modification you should be very familiar with the function of the WUR and how its pressure adjustements affect the performance of the K-Jetronic fuel injection systems. The tools and supplies offered in this kit will allow you to modify your warm up regulator at home and it y
New Mercedes o-ring as shown. Always replace this seal when removeing and cleaning your fuel tank strainer ( screen ).
This 25 minute video will instruct you on how to replace the fuel injectors in your 1976 to 1980 8-cylinder M117 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
PLEASE READ BEFORE ORDERING: The plastic injector holders are no longer availabe. The video instructions will show we include them in the kit so PLEASE disregard. You will have to use your old holders and install the new green seals we include.
This 16-minute video will instruct you on how to replace the fuel injectors in your 6 cylinder M110 safely and efficiently. Since this is a fairly straight forward remove and replace this is not a step-by-step video.
This is every thing you need along with free video instructions by Kent Bergsma. Why change the K-jet fuel injectors in your M110 engine. One thing is they are very old. Second this is right now they are readily available and resonably inexpensive.
We modify this wrench right here in our shop. If a picture is worth a thousand words, what is a video work. Watch the following for a full explanation.
This is a high-quality ACM aftermarket part. The fan runs smooth and air movement is very strong.
Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up. Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.
The sunroof transmission drive unit moves the cable back and forth to open and close the sunroof. There are 5 gears inside this unit that transfer the incoming drive from the motor ( high speed) to the final drive moving the cable (slow speed).
In part one Kent will show you how to get all the sunroof parts off our old Mercedes and on a bench particularly if you sunroof is broken and not moving. In this 21 minute instructional video here is a list of the subjects he covers:
These are very high quality bolts. Same 8mm thread and small 10mm head as the originals. 8 is enough for two front seats.
This is a sample of the nut plate they go into on the back attach point on the W123 front seats.
Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.
This custom-made thin head wrench by Kent Bergsma can save the day and your pocketbook. It is very important that you hold the fitting base on the oil cooler when removing the oil cooler hoses. A regular 22mm wrench is almost always too thick and can also cause damage.
In this detailed 30-minute video Kent will walk you through the process of installing new tie rod ends on his 1959 Mercedes 220SE. The principles are the same on almost all models from the 1950s up to the 1990s. He will explain the differences in adjustment between the older and newer styles
Loose steering or wheels shaking at speed. This can often be worn out tie rod ball joints. The joints can be replaced as a DIY project. Watch the video below to see if this is something you want to take on yourself.
This kit includes:
These have been inspected for good hex heads and for abnormal thread stretch. Threads will need cleaning before installation. Always use liberal blue thread locker when installing.
You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.
This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.
Why is this so important? It is primarily due to the age of these cars now and the fact that lurking problems can be hidden from visual inspection. There is not ONE diesel that Kent has looked at in the last five years that does not need this service! Even ones with under 150,000 original miles.
Kent delivers a very detailed 24 minute video on understanding how this valve works and how to fix it if possible. You will learn how to recognize a valve that is just too worn out to repair. No bleeder valve repair parts are available and there is not way to DIY fix one if it is badly damaged.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
Planning to replace the head gaskets on your older v8 engine. You should have this tool on hand before you start. You don't think so? Watch the video and then decide.
Version 4 update 2/22: New color and style but still does the same job. This is one of the key tools you will need to remove stubborn pre chambers from the cylinder head of your old diesel engine.
These are not Mercedes specific although some will work well in certain places on older Benz. This is a general purpose assortment that can be used on many vehicles. Handy to have in your garage.
Used seat track hardware as shown.
This universal 13/16-inch spark plug socket comes with a 3-inch extension. On some V8s, you have very limited room to get to the rear sparkplugs. You can add another extension for open access to bring the ratchet wrench out in the open.
For years I just used old shop rags to catch the drips - until I found this! What a great solution. Watch the video below for more details
Tightens and Removes Collar Nuts on 220D 240D 300D 300CD 300TD 300SD 300SDL 190D 2.2 1969 to 1987. Works on most Mercedes diesel engines up through 1987 only.
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five USED wheel bolts that are not all rusty.
In this 17 minute instructional video Kent will walk you through removing and installation a VCV valve off the back of the injection pump and the proper way to adjust the linkage travel for best performance. A number of tips will be shared to reduce frustration and prevent problems.
It has now become essential that you replace this filter screen on these old cars, especially if they have been using gasoline with ethanol in it and the car has sat or sits for long periods without running.
Why do you need to do this? Valve clearances are supposed to be adjusted on these early V8s every 10,000 miles. You can imagine why this does not get done! Add to the fact owners can not find the right information or tools and it makes neglect even worse Why not on later model years?
This is our most complete FID kit yet. Kent wanted to make sure you would have all the parts you need including hardware.
This was removed from a vehicle and was tested. ONLY ONE KEY but it is the low-security key so easy to get a duplicate made. Very good key movement, good working electrical switch, and door buzzer switch mounted. Fits Early 107 and later W116 chassis only ( see list in title )