OM616 OM617 FUEL INJECTOR HARD FUEL LINE #3 - USED
This is for number THREE cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
This is for number THREE cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for number TWO cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for the number one cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
GOOD used housing as shown. Does not include the lid.
If you own one of the early Mercedes overhead camshaft engines from the mid-1950's up to the mid-1970s that have mechanical (non-self-adjusting) lifters this is a MUST HAVE tool!
This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...
If you have worked on 5-cylinder 617 turbo diesel cylinder heads before you already know how important it is to have the correct socket for the star cylinder head bolts. This socket is a must to properly remove and re-torque those bolts.
I save this for someone who might have a 1980 300SD and does not have the sticker for the vacuum hose routing. I thought someone out there might want this... :-)
Get rid of that old and ineffective transmission fluid in your older power steering system. It is the number one cause of excessive gear wear in your steering box. This is our partial kit that does not include the fluids so it can be shipped by air mail. Please study the pictures here.
Kent video instructions will take you through the process of flushing out the old automatic transmission fluid and replacing it with modern enhanced power steering fluid. This procedure was filled on a W108 280SE 6 cylinder sedan.
Get rid of that old and ineffective transmission fluid in your older power steering system. It is the number one cause of excessive gear wear in your steering box. This kit will include almost everything you will need to do this yourself, along with complete step-by-step video instructions.
This is the hose on the left side of your engine that seems to always rot and leak power steering fluid. If you look closely at it you will most likely see small cracks in the hose. This is the larger size hose used on those early models with power steering from the early 1960's through 1976.
UPS ground shipping only. Can not be shipped internationally. Rather than try to explain what this kit does and how it does it we are going to ask you to watch the video below if you have not already done so.
These might be needed when replacing the engine head or aluminum water pump housing. This includes the water pump bypass tube and the two small banjo bolts for the tube along with aluminum sealing rings.
Good used shield and 2 bolts as shown.
Good used seat pad as shown. Not perfect but better than most. May need additional foam in the center section to suit your "sitting" style.
This is the very best hose Kent has found to use to install spark plugs in restricted spaces. Watch the video below and he will demonstrate.
The seal in this kit is out of production. Only small quantity left. For EARLY 240D 300D 300CD 300TD and W116 300SD Models. Usually up to 1980 BUT YOU MUST LOOK AT YOUR PUMP BEFORE ORDERING! WATCH KENT'S VIDEO BELOW. You have asked for it and we have delivered again.
Good used bolt set with good hex heads.
Here is the location of these five important bolts. Do not use the cheap paper gasket in most gasket kits for the oil filter housing. It will leak!!!!
If you have a reasonably good front seat bottom that is just a little HARD to sit on for any length of time then this "booster" kit may help solve your problem.
Our seat spring repair kit has been a great success! It can easily repair sagging on broken front seat springs. But what about seat padding. A lot of the older ( 1970's to 1980's glued fiber seat padding can crush down and even disintegrate over time.
Kent finally went to work to solve the problem of rusty water pump mounting bolts. Once the problem was studied carefully the solution became obvious. Watch the video for a full explanation and partial instructions below.
Kit contents:
Good used working EGR valve. HARD TO FIND. The valve opens and closes properly and holds a strong vacuum. Hard to find. Failure of this unit can cause excess smoke, poor idle, and/or rough shifting. Check to see if yours holds vacuum. Easy to replace.
Keeping your throttle linkage ball sockets and pivot points lubricated extends the life of the parts and maintains top performance for the engine as well as some of the later transmissions.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
Cosmetically in excellent condition. If your cluster housing is faded, gouged or the plastic face scratched this is the replacement you want. No dash seal OR dimmer switch. Have not tested clock or tach. No guarantees. No return. Priced accordingly.
Excellent used over as shown.
Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.
For a number of maintenance operations, you need to be able to turn the engine over by hand. This includes valve adjustment, timing chain replacement, injection pump timing on diesel engines, checking and setting internal engine timing, draining the torque converter, and others.
This is the part that more often than not gets lost when the SLS pump is removed from an engine for a long period of time. If you are trying to return the system to original after someone has removed the pump you most likely will need this part.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
This tank works amazing! Put in the heavy rear end or trans fluid. Pump up the pressure. Stick the non-fall-out end in to fill hole... and just push on the valve in the handle of the filling wand.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
This video will take all the "mystery" away... For all W116, W123, and W126 Turbo Diesel 5
One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.
These are Kent's favorites. As shown in this video on youtube. Pack of 5 shipped.
Fits the following: All 5 cylinder diesel engines from 1975 to 1985. For 300D 300TD 300CD 300SD, PDF instructions included. This is the critical inside wear part of the injector that delivers the fuel spray into the cylinder. These are direct replacement new fuel injector nozzles from Bosch.
This is not a complete instructional video on how to "overhaul" the M116 and M117 D-Jetronic fuel injected V8 distributor. There is lots of information out there on installing new points, setting the dwell and timing, replacing the cap and wires, etc.
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
If you own a Mercedes with the M116 V8 engine (expect 1980 to 1982 380 engines with single low chains) timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine.
If you own a Mercedes with the M117 V8 engine timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine. If it happens at low speed, you may get away with removing the heads and replacing some bent valves.
Learn all the tricks to adjusting the valves on your older Mercedes V8 engine.
PLEASE NOTE: These are not complete instructions on how to open up an early style SLS pump and properly reseal it. Rather, these are some tips that will make the job go faster and easier. These are things Kent has learned rebuilding a number of these pumps himself.
PLEASE NOTE: This is NOT a complete instructional video on how to install a new timing chain in a 1970 to 1991 M116 or M117 Mercedes V8 engine. Rather it is a collection of "tips" to help you prevent running into trouble when doing this job yourself.
In this video, Kent will walk you through some initial steps you can take to try to solve a rough running problem on an early Mercedes V8 engine with D-Jetronic fuel injection. Please note that this is an introductory troubleshooting video. It does not contain any actual repair information.