Rear Suspension Performance Operation - On Demand Video
In this 30 minute-long video Kent will walk you through what he did for the rear suspension on his 1983 240D.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
In this 30 minute-long video Kent will walk you through what he did for the rear suspension on his 1983 240D.
This 17-minute video will cover the removal of an old Hirschmann power antenna and then Kent will show you how to troubleshoot the wiring plug in the car to see if you are getting proper power back to the antenna. No sense in replacing a faulty antenna until you make sure your wiring is OK!
In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.
You might be surprised to realize you spark plug holes need cleaning - and yes some REALLY need cleaning! This 5-minute video will demonstrate Kent's method of cleaning the threads in the cylinder.
This video is loaded with tips on how to properly lubricate all the key components that make your sunroof operate smoothly and properly. It is NOT a complete manual on everything related to sunroofs. It will NOT show you all the details to get the sunroof out and back in.
Clear instructions on how to remove the old boot and install a new one. Total run time:
In this 22-minute instructional video, Kent will take you inside the door on a W123 240D and show you all the key points that should be lubricated and the type of lubricants you should use.
This on-demand instructional video was filmed to go with Kent's new fuel tank sending unit service kit launched in June of 2020. This is not a complete video on the subject of fuel level sending units. For the complete video see related products below.
In this 7+ minute instructional video, you will learn how to cleanly and safely drain the fuel out of your old Benz.
This 23-minute video will demonstrate how Kent repairs some small rust spots inside the fender wells of a W116 sedan. Disclaimer: This method of repair is not recommended for large rust holes under the car or for holes that have been caused by road salt.
When the motor won't move the window down you can not get to the bolts that hold the regulator to the glass. So then how can you get it out of the door! What a pain! In this xxx minute video Kent will show you what you need to do in order to get a "stuck" power window regulator out of a door.
PLEASE read the instructions below carefully on how you will view this video. It is NOT downloaded to your computer and viewing is NOT automatic. You must be logged in at Mercedessource.com and you MUST click on "my account".
In this video, Kent will walk you through the steps needed to convert your older Brake Bleeder tank to one that can continue to bleed brake systems as well as pressure test radiators and cooling systems.
This video will not only save the condition of your door panel, but it will save you a lot of time and frustration when you go to replace a door panel after doing maintenance inside your door. Those old plastic film liners always seem to be torn, ripped, and downright ugly.
Kent video instructions will take you through the process of flushing out the old automatic transmission fluid and replacing it with modern enhanced power steering fluid. This procedure was filled on a W108 280SE 6 cylinder sedan.
Our seat spring repair kit has been a great success! It can easily repair sagging on broken front seat springs. But what about seat padding. A lot of the older ( 1970's to 1980's glued fiber seat padding can crush down and even disintegrate over time.
This video will show Kent's technique on how to prime and paint alloy wheels using our wheel paint kit and masking dam that we sell separately. See below. The techniques will also apply to any spray can paint you should choose to use.
This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.
In this video, Kent explains the correct procedure for cleaning and lubricating your hubs and rear brake rotor BEFORE you install your wheels. He hardly ever sees this done when removing wheels on 15 plus-year-old Mercedes so he knows it is almost ALWAYS neglected.
Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.
This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:
Have you dreaded changing the rear end fluid before because it is a pain and ends up being really "messy?" Kent finally decided there had to be a better way so he went to work and came up with the idea of using a simple and affordable custom made pressure tank to "flush" and refill differentials
This video will take all the "mystery" away... For all W116, W123, and W126 Turbo Diesel 5
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
This can happen when you least expect it! It happened to me right when I purchased a W109 300SEL and it can be really frustrating.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
This video will show you to details on how to use Kent's custom rear end and manual transmission drain plug wrench. These 14 mm plugs were used on almost all manual transmission and rear ends from the early 1960's up to the mid 2000's.
If your early door lock actuators do not have any cracks in the rubber diaphragms, but they just won't hold vacuum - it may be possible to fix them by taking them apart and cleaning and resealing the outer lip of each diaphragm.
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
I have always dredded replacing a hood release cable. Finally on the last one I did, I decided to do something about those feelings.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
If you have a 1985 or older Mercedes Benz it is time you flush that old automatic transmission fluid out of the system and replace it with a good power steering fluid. ATF formulations have changed over the past 20 years.
Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?
If a car has sat outside in the elements for long periods and has not been washed or waxed in months there are some things you need to do BEFORE you apply the buffer to the body and the final wax to the paint. This is where you will need some real "elbow grease."
When you are out looking to buy an older Mercedes in this time period you have to be careful. You have heard that these old Benz (particularly the diesels) can go forever! So why is mileage that important. Because contrary to those "myths" they do not go forever without impeccable maintenance.
If your engine is just running hot, it may be due to a plugged radiator or possibly a stuck thermostat. If your engine is just losing coolant it could be a leak in the water pump, radiator or hoses.
In this video Kent will show you how to rid your car of those less than attractive rock chips and other paint flaws from door dings and general scratches. He will walk you through the paint and supplies you will need and then demonstrate step-by-step using a 2000 S500 and a 2000 E320 wagon.
In this video Kent explains some of the key reasons for poor battery contact and loss of voltage to important electrical components. If you want your later model Mercedes to run a peak performance pay attention to your battery.