This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
New O.E. cap as shown. Alert: These are almost out of production.
If you are a 1969 to 1991 V8 you should have some extras of these on hand. They are inexpensive and should be replaced anytime you remove your valve covers. The gaskets will keep a good seal longer than the bolt washers.
These will fit all 1970 to 1975 3.5 and 4.5 V8 engines with D-Jetronic fuel injection (electronic). Do not use off-brand, platinum or any other "special" spark plug.
One of the most often neglected easy and inexpensive maintenance items I see on gas engines. Why do people think that spark plugs will last forever or that it doesn't matter what type of plug is used! Aren' they all created equal?
This is a VERY common maintenance item on the older Mercedes V8 engines. If they are too old they will leak. If they are not put on properly they will leak. If you do any maintenance (ie, valve adjustment, clip replacement, timing chain, guides, etc), you should have this kit on hand.
You can not believe how many problems Kent has seen over the years as a result of the camshaft oiler tube falling off inside the valve cover! It is held on by inexpensive small plastic clips and guess what happens after 15 to 20 years? Yes, that is correct.
Kent will show you the proper way to remove and replace a V8 valve cover gasket so you won't have oil leaks after installing a new one. This is a common maintenance item.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Works on W114, W115, R107, W116, W123, W126, W201, W124, W140, R129 as well as most of the models through the 2000s. will 14mm hex plugs. This wrench is used when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only.
These are the instructions that come with our black engine and chassis paint restoration kit, but they will help you successfully spray paint almost anythings. These step-by-step techniques were developed by Kent over almost 60 years of spray painting cars and parts.
UPS GROUND ONLY: This is the best spray can paint Kent has found to detail the semi-gloss black parts on your Benz. It is not easy to find a good spray can paint!
This on-demand training video will walk you through the steps you need to follow in order to get your headliner panel off so you can work on the sunroof. If your sunroof won't open, you are stuck - right? Not SO according to Kent.
If you have been enjoying Kent's free Youtube videos but have not yet purchased and watched one of his on-demand "meat and potatoes" videos, we guarantee you are really missing something.
This is the best tool we have found to remove the chrome side trim strips and snap type door panels on may of the older models from the mid 1960's to the mid 1980's.
If your early door lock actuators do not have any cracks in the rubber diaphragms, but they just won't hold vacuum - it may be possible to fix them by taking them apart and cleaning and resealing the outer lip of each diaphragm.
In this video instruction Kent will show you how he installs our battery tender kit in a W124 Mercedes.
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
Over the years I have used lots of different methods to clean off rust before applying Miracle Paint. This is the best and quickest method I have found. This is a great tool that can be used for many other things like cleaning off brake hubs and rotors.
These early “short style” electric fuel pumps are very prone to leaking fuel because the rubber case o-ring seals harden with age. New pumps are no longer available and rebuilt are VERY expensive! If you risk buying a used one it will probably end up leaking or seeping fuel too.
This 28 minute on demand video manual will take you through the step-by-step procedure for taking the upper (motor section) of a short MFI fuel pump apart and replacing three o-rings that are prone to hardening and leaking fuel.
DOES NOT INCLUDE HOOD PAD --- This special glue is not easy to find and the price has recently fluctuated drastically since 2021.This kit includes what you will need to successfully install a new foam hood pad in your older Mercedes.
We have been looking for a long time to find a super strong and well made tool to adjust those tough 17 mm ball adjuster sockets on the early 4 and 6 clyinder gas engines.
This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
After years of "fighting" fuse replacement, Kent finally decided he had had enough! And so was born another special tool. It is designed to securely grab hold of a ceramic fuse, remove it from it, and replace it with minimal exertion and no damage.
These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:
Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.
This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes. He makes each one of these tools right here in his shop.
Want to try to make your car's engine and engine compartment look like it just came off the showroom? Would you like detailed information on the chemicals, brushes, tools, and procedures Kent uses to get his engine compartments looking so nice?
Valve adjustment is often neglected on many of the mid 1950's to early 1970's 6 cylinder single overhead camshaft gas engines. If it has been years since any adjustment was made, there will be problems - Kent can guarantee it!!!
These are all 3/8 inch drive hex sockets. All are the same length 11 cm total length. These are great to have with the short hex just won't reach long enough.
Removing the tilting sunroof panel is a little bit of a mystery to many owners. Since there are no exposed fasteners, at first glance it can appear to be very difficult to remove.
Indications that your seal needs replacing are tears in the lip and no resistance when you close your trunk. If you trunk snaps shut too easily it means the seal has collapsed and is no longer sealing properly.
This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.
If a car has sat outside in the elements for long periods and has not been washed or waxed in months there are some things you need to do BEFORE you apply the buffer to the body and the final wax to the paint. This is where you will need some real "elbow grease."
If your engine is just running hot, it may be due to a plugged radiator or possibly a stuck thermostat. If your engine is just losing coolant it could be a leak in the water pump, radiator or hoses.
In this video Kent will show you how to rid your car of those less than attractive rock chips and other paint flaws from door dings and general scratches. He will walk you through the paint and supplies you will need and then demonstrate step-by-step using a 2000 S500 and a 2000 E320 wagon.
In this video Kent explains some of the key reasons for poor battery contact and loss of voltage to important electrical components. If you want your later model Mercedes to run a peak performance pay attention to your battery.
BACK IN STOCK AS OF MAY 2026! * please note these are folded and packaged for shipping. There will be be some slight creases in the fender cover when you unpack it but will work themselves out after being laid out flat for some time.
Do you have a manual or power sunroof that is working poorly or maybe not at all? Does it move slowly in the morning, but when it heats up during the day it works just fine? Do you have to assist it by hand to get it fully opened or closed?
5 page digital PDF Instructions include multiple pictures to assist you in completing the job. Clear and detailed with tips and tricks from Kent Bergsma's years of experience.
We also highly recomend the Ultimate Flexible Brake Hose tool to complete the job. Look below to view.
Older Mercedes have a very effective emergency brake design which was virtually the same on all models from the late 1960s right up through the early 1990s. The actuating mechanisms are all mechanical and are controlled by a Y cable under the car.
For all 108, 109, 114, 115, 107, 116, 123, 126, 201, and 124 chassis from 1965 to 1995. I wrote this repair guide to show you how to properly remove your instrument cluster and replace worn or failing components. (NOTE: This is not a detailed manual on how to repair the components.
Have you been having electrical problems in your older Mercedes? Maybe you have taken the fuse box cover off and wiggled a few fuses and it has solved the problem for a while. You probably noticed corrosion on the tips of the old aluminum fuses.
The digital PDF instructions will walk you through the install and detailed photos will visually assist you step by step. PDF is 4 pages long.
This instruction booklet is meant to be an introduction to simple rust repairs. I have also written a manual that goes into more advanced repairs using Miracle Paint to replace larger rotted sections of sheet metal.