Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.
Kent will show you how he found one very small leak in the front and a inconsistant leak in the rear of the airmatic suspension on a W220 S500. Neither of these leaks were showing up on any diagnostic scan so they were not the direct fault of major component failure.
Installing front shocks on a W210 chassis 4matic sedan or wagon is not for the beginner DIY mechanic.
In this video instruction Kent will walk you through the process of doing either a partial or a full flush of your W210 SLS system fluid, including some tips on how to make changing that little filter less frustrating.
PLEASE NOTE: UPS Ground shipping only to the lower 48 states. Sorry no international. Even though this is a synthetic fluid it should be changed on high mileage wagons. I think some owners figure it will last forever.
This U.S.A. made 17 mm 8 inch long combination wrench is custom modified here in our shop to help you easily install Bilstein front and rear shocks on most of the older model Mercedes Benz.
In this video instruction, Kent will demonstrate how to check for one possible source of a mysterious front end clunking sound. Any clunking noise you hear when driving over rough ground or when braking should be investigated immediately.
This is the most thorough kit available anywhere in the world for opening up and resealing your early style (square ) SLS leveling valve. This was used on all W123 300TD wagons and a few other models during that same time period.
Why these special tools? Can't you just adjust that rod with a couple of combination open end wrenches. Maybe yes and no... have you tried it? You can not get the rod off with a regular thickness 10 mm open end wrench.
Kent will walk you through the steps to properly adjust the leveling according to factory specifications. He will also cover some of the problems you may run into and demonstrate how he used the new adjusting tools he designed.
In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting
Trying to fix a rough or bouncy ride in your SLS Mercedes? Not sure what is causing the problem? Maybe you have heard that it might be the accumulators.
In this video Kent will walk you through the procedure of removing the old accumulators and installing new ones in a W123 300TD wagon. It is a very straightforward job that only takes a couple hours. You will need to raise the car and safely support it on jack stands.
This video will walk you through the procedure of removing the hyraulic reservoir tank and cleaning it and replacing the low pressure hose from the bottom of the tank to the SLS pump. This is the hose that most often leaks.
NOTE: UPS GROUND SHIPPING ONLY. This complete kit will help you flush the old ATF fluid out of your power steering system and replace it with new high-performance power steering fluid.
If you have a 1985 or older Mercedes Benz it is time you flush that old automatic transmission fluid out of the system and replace it with a good power steering fluid. ATF formulations have changed over the past 20 years.
When replacing the front upper control arms you formost need to think about safety. You will need a good quality and large rolling hydraulic floor jack, and a couple good jack stands.
This video instruction will walk you through the step-by-step procedure of how to do a "service" on your power steering system.
PLEASE NOTE: UPS GROUND SHIPPING ONLY. Sorry, no postal, expedited or international shipping. This is a highly neglected maintenance item on older Mercedes Benz. If you want to prolong the life of your steering box and power steering pump here's how.
UPS GROUND SHIPPING ONLY. DO NOT order postal or expediated. International shipping not available. If your fluid is old and dark it is time to flush it out. 1986 to 1999 model W126, W201, W124, W140 and W126 with SLS have a smaller tank than the earlier models.
New O.E. filter as shown. See related products for fluid and flushing instructions. This is VERY easy to inspect and change yourself.
This instructional video covers the procedure for flushing the old hydraulic fluid out of an SLS system and installing new fluid. The example shown in this video is from a W126 560SEC.
This is a very high quality finish wrench set. The 13mm combination wrench that is 8 inches long. The 17mm has a ratcheting box end great for alternators, bumpers, etc. and is 11 inches long. The 18mm for 1996+ models is also 11 inches long.
Very good disk steel wheel . Straight and no damage. These will require the full disk 14-inch hubcaps as well as the short lug bolts. The long lug bolts from the alloy wheels will not work. Does NOT include lug bolts. See related parts to order separately.
Digital 4 page PDF instructions. Detailed pictures and step by step instructions to assist you in completing the suspension guide rod bushing replacement.
For all 107 chassis SL and SLC models built from 1972 to 1989 and all 114 / 115 chassis sedans and coupes from 1968 to 1976. If the front end of your W107 SL or SLC convertible or coupe or 114/115 wanders on the road or thunks when you go over railroad tracks
Brand new rear end differential front seal. Fits both gas and diesel models. This is NOT the seal for the axles.
Brand new Genuine Part. Plastic ball sockets can deteriorate and threads can rust up. It is important you have a good operating rod and tight arm in order to properly adjust your rear end ride height. NO instructions included. See our manual on SLS troubleshooting for more information.
SINGLE AXLE KIT: This set of boots will work on ONE (1) axle of the BOLT TYPE. This will not work if you have the crimped can type axles. SEE PICTURE BELOW TO CONFIRM IF YOUR AXLE MATCHES THIS TYPE! If you order the wrong boots by mistake they are not returnable.
When replacing front shocks on the above mentioned Mercedes you must a 10 mm 12 point shock with 3/8 inch drive. If you don't have one you will in trouble.
This is a high quality thin wall socket made in Taiwan.
Every one of these pumps I have ever seen needs resealing. The seals and o-rings become just too hard over all those years of use. This is the most complete SLS (self-leveling suspension) pump overhaul kit on the market today.
This is a handy compact winch pulling tool. Not designed for lifting. It is a must have if you plan to replace the guide rods or guide rod mounts (brake control rod bushing) on any 126 chassis from 1981 to 1991 300SD 380SEL 500SEL 380SEC 300SDL 350SDL 300SE 300SEL 420SEL 560SEL 560SEC.
Fits 450SL 450SLC 450SE/L 380SL 380SE/L 380SEC 500SEL 500SEC 420SEL 560SL 560SEL 560SEC 1973 to 1991 - ALSO FITS 126 Chassis 300SDL 350SDL.
Brand new complete wheel bearing kit. Includes all parts shown for right or left wheel. You with need to order 2 if you want a complete set of wheel bearings for both sides.
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
New inner front wheel bearing seal. Fits right or left side. Should be replaced when repacking wheels bearings with new grease. NOTE: DOES NOT work on cars with ABS brakes.
If you own a 123 wagon or other Mercedes with self-leveling suspension, you will be faced someday with having to replace the main high-pressure hydraulic hose that goes from the engine-driven pump to a metal line fitting routed back to the rear suspension.
New Genuine OEM rear stabilizer bar bushings, sold in a set of two. Fits 123 chassis 1977 to 1985 240D 300D 300TD 300CD 280E and 280CE.
Located above and aft of the rear differential as shown in picture below
Dont neglect this service as many do! I recommend the hydraulic fluid and filter be changed every 30,000 miles. You would not believe how many SLS vehicles I have seen with dirty hydraulic fluid - I mean nasty! Sometimes I have even found engine oil in the system!
New 126 Chassis 300SD 380SE 560SEL 300SDL Febi Front Stabilizer Bar bushings. Sold in a Set of Two (2).
New Bilstein rear touring shock absorber. Please check your vin number before ordering.
Complete reseal kit as shown. Wow!
Sorry NO instructions available.
Special order item. Please do not expect immediate shipment. Rear Spring replacement on these big 126 sedans is often necessary to fix persistent rear end sag problems - especially if car has been driven with heavy loads in past. Brand new high quality Lesjofors spring.
COIL SPRING
This is a maximum thickness rubber shim (19 mm thick) to adjust the ride height when installing new or reinstalling existing rear coil springs. Two required per car. Also fits 114, 115, 116, 123 sedans and coupes and 126 chassis cars.
This is a medium thickness rubber shim (14 mm thick) to adjust the ride height when installing new or reinstalling existing rear coil springs. Two required per car. Fits 116, 123 sedans, wagons and coupes and 126 chassis cars.
These special springs are unique to wagons only. They are designed to only support the weight of the car when it is unloaded. With age and malfunction hydraulic struts these springs can weaken and allow the rear of the vehicle to sag.
There are two gas filled accumulators of this style under the rear of the 1979 to 1991 123 300TD wagons, 201 190E 16v and 126 560SEL sedan and 560SEC coupes with self leveling rear suspension ( SLS ).
When these part wears, the control rod will move back and forwar and the joints will clunk when you go over bumps. This is becoming a very common failure part on these older 123 chassis. We provide you with replacements for BOTH sides (inner and outer as shown).
Common 123 front end wear item. Bushings attach the lower control arm to the frame. Rubber fails and front end gets loose and noisy.
Location of lower control arm bushing
Bushing kit that attaches the front suspension guide rod to the lower control arm. This is a wear point that is often neglected and if loose can cause clunking in the front end. This is a complete kit for both sides. 2 kits included.