April is fuel injection month. We may have a few injection products on sale. CLICK HERE to view all sale items.
Sold individually. Fits models 1968 to 1980 only. ** Some exceptions include ALL 380SL from 1981-1985****
For all 4 and 5 cylinder diesel Mercedes 1969 to 1985 ( Except 190D)
Looking for better-staring performance? Are your glow system lights not coming on on your dash even after replacing the glow plugs? It it taking way too long for the glow light to go out ( it should only be on 5 to 10 seconds)?
This is a common wear item on high mileage 126 chassis. It will start out as a clunking noise when you go over rough ground. When real bad it will be hard to get your car to track right down the road (it will want to wander) and you will experience uneven and rapid tire wear.
Fits the Following: All 123 and 126 Chassis from 1977 to 1991 .
FITS THE FOLLOWING All 116, 123 and 126 chassis diesel cars with 5 cyl. turbo engines. This includes 1982 to 1985 300D, 1982 to 1985 300CD, 1981 to 1985 300TD and 1978 to 1980 300SD / 1981 to 1985 300SD. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT
FITS ALL 115 220D 240D 300D and 123 240D 300CD 300D 300TD with NON TURBO engines. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT! In previous years I have had a number of Mercedes diesels come in to my shop with severe damage due to total drive line flex disk failure.
All 280SL 450SL 380SL 1972 to 1985. All 230SL 250SL 280SL. All 108 and 109 Sedan from 1965 to 1973 including 280SE/L 5.4 and 300SEL 3.5 and 4.5. All 114 and 115 sedans and coupes from 1968 to 1976 including 220D 240D and 300D. We are now offering a kit with 2 new tie rods.
APPLIES TO: The first general automatic climate control was introduced in 1977 in the U.S. market.
For all 123 chassis cars sedans, coupes and wagons from 1977 to 1985. Why a glove box manual? Of all the Mercedes glove boxes I have worked with from the early 1950s up to the mid 1990s, the 123 chassis glove box has proven to be the one that needs the most attention AND
Kit contains right and left tie rod assemblies as shown. We have found if you discover one or more loose tie rod ball joints, it is always better to replace both rod assemblies at the same time. Entire assemblies are about the same price as two individual ball joints.
FITS THE FOLLOWING: All Mercedes Chassis 111 113 108 109 107 114 115 116 123 126 from 1968 to 1991 (not applicable for 201 or 124 chassis). This is a very common wear problem on most older Mercedes.
This unique kit will allow you to hook up a 30 in HG vacuum gauge between your vacuum control shifting valve (VCV) and your transmission modulator to test the VCV for proper function and to tune it for peak shifting performance.
Applicable to 114 115 116 123 and 126 Chassis, years and models listed above. Troubleshooting an annoying shift problem must first start with the vacuum modulator.
FITS THE FOLLOWING: ALL 123 and 126 chassis 240D, 300D, 300TD, 300CD, and 300SD 1980 to 1985 with later style vacuum pump (only one line coming out of top). In 1980, Mercedes changed the design of its diesel vacuum pumps.
These steel cupped heat shields go under the rubber mounts to help deflect heat and grease away. In most cases (unless your engine is severely shaking) they will prolong the life of the rubber mounts.
When used for bleeding or flushing your brake system, a single person can do a rapid fluid flush! No mess and very efficient. Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below: 25-minute video instructions are now included.
Only two plugs are available. These are best for spares with an engine that already has fast pencil plugs installed. They fit 4-cylinder flat head diesel 636 engines built in the 1950s.
Yes, there may be a fuse inside or outside your fuse box that controls your heater blower motor or another high amp draw electrical component. Most of the separate fuse holders require a 30 amp fuse. You may find a funny looking bent fuse inside your fuse box.
50 amp fuses were used on most 123 240D diesel glow plug systems due to the lower amp draw. 80 amp fuses will also work but some may choose to go with original spec. Check the number on the center of the fuse you are currently using. It should read either 50 or 80.
PLEASE READ CAREFULLY. This glow plug works ONLY in those years and models listed above. SOLD INDIVIDUALLY. If you need five please change your cart total to 5. If you need 6 then change the total to 6. PLEASE NOTE: NO INSTRUCTIONS and NO WIRE NUTS are included.
This custom reamer designed and built by Kent Bergsma in our shop is the only one like it in the World. This is truly another first. Now you will be able to ream out that old crusty carbon build-up in your old diesel engine. Thread size matches old series-style glow plugs. 18 x 1.5
If you are planning to install new glow plugs in your 601 engine, 190D from 1984-1986, it is essential that you ream the carbon out of the holes to prevent premature failure of your new plugs.
Tired of having to pull and hold the glow / starter knob on your old 110 or 115 chassis diesel? Hand getting tired? Waiting forever to get the glow plugs hot enough to start the engine? Wish the glow plugs would not burn out so often?
Cleaning out the carbon is a MUST anytime you change glow plugs in these engines. If you don't do this your engine will not run as well a startup and it will shorten the life of the new plugs. This is a high quality custom made glow reamer. All steel body. Made by Kent Bergsma.
WARNING: PLEASE confirm you have the original engine in your diesel BEFORE ORDERING this kit. We keep getting owners ordering this kit only to find out a later model engine has been installed. This happens quite often.
If you own an early 123 4-cylinder diesel, then this is a must-have diesel engine kit! This glow plug upgrade will do three things that will put a smile on your face: 1. Your engine will start faster and cold idle smoother. 2. Your glow plugs will last longer. 3.
There are other brands of brake pad anti-squeal paste on the market, but for me the factory Mercedes paste has proven to be the most effective. It simply stays in place and holds up better over the long haul.
Fits chassis 116 123 126 124 and 201 Diesels with pencil glow plugs, from 1978 to 1989. This includes the OM617, OM601, OM602, and OM603 engines. They also work on 1977 to 1979 300D 300CD and 300TD with series glow plugs. This pack includes three individual fuses.
Set of 5 High Quality Bosch Glow Plugs complete with a detailed Glow plug removal and replacement manual written by Kent Bergsma. These fit 124 chassis 300D 2.5 from 1990 to 1993, and 1989 190D 2.5 ONLY.
Made in Germany. Application: Fits all 4 cylinder 240D diesel engines from 1980 to 1983 with pencil glow plugs. Excellent quality. They are built with the same materials and have the same specifications as the Bosch Duraterm pencil plugs.
PENCIL GLOW PLUGS ONLY!! WILL NOT WORK ON MODELS WITH THE OLD STYLE LARGE THREAD SERIES TYPE. For 1978 to 85 300SD Turbos / 1980 to 93 240D / 300D 300TD 300CD 190D 300SD 300SDL 350SDL. When was the last time your glow plug chambers were reamed out?
This kit includes a New Mercedes OEM fuel tank filter screen along with a special tool I have made to remove and install it. It will save you the time and expense of running out and buying a great big Allen wrench.
New German made fast heat glow plug designed to replace the series loop tip style glow plugs that were installed in all non-turbo diesel engines up to 1979. These have the large thread built in so they will install directly into the older heads.
Fits late model 123 sedans ONLY from 1981 to 1985, such as the 300D. Be sure your gas door lock actuator matches this before ordering! This is a new plastic sealed unit as used on the later models.
FITS THE FOLLOWING: all 126 chassis SEDANS from 1981 to 1991, including 300SD 380SE 380SEL 500SEL . Are you tired of the water leaks into the trunk and rear carpet area? Windows all fog up when you get in the car in the morning. Sick of that musty smell in the trunk and cabin.
Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991.
This is a set of 8 Front brake pad sensor wires. The front brakes require two per side. Nice to have spares on hand!
Can be installed on the following models: Please read carefully. All Turbo 116 and 126 300SD 1978 to 1985. All 123 turbo and non turbo 240D 300D 300CD 300TD 1980 to 1985. 1984 to 1989 201 190D. 1986 to 1991 126 300SDL 350SD and 350SDL. 1986 to 1993 124 300D and 300TD.
Can only be shipped UPS GROUND. NO INTERNATIONAL. Extra packaging charges may apply. It some cases it may be shipped in its own box depending on the size of your order and the other products included.
Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.
If your diesel engine is starting to shut off very slowly or maybe not at all and you know your vacuum system is ok, it may be time to replace the vacuum fuel shut-off valve located at the rear of the injection pump.
For all 201 chassis 190E and 190D built from 1984 to 1993. The PDF download repair guide will take you through the process of how to properly remove your heater blower motor and replace the motors two brushes. This is the most common reason for failure.
Born out of frustration this twin chamber plastic bottle has solved two of Kent's biggest head aches when brake bleeding or flushing brake systems.
When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings or hose were swollen and would just not stay connected?
This vacuum line is white and is 4 mm in size. It is used on all 107 108 109 110 111 113 114 115 116 123 124 126 chassis. You can use it to replace any hard vacuum line on the engine.
Mercedes 114, 115, 107, 116, 123, 126, 124, and 201 chassis window trim has a super strong anodized coating that is impervious to hand polishing but still can oxidize when exposed to harsh environmental elements. When this happens the trim becomes spotted and milky in color and it is NOT pretty!
Need an easy to install and quick solution for your worn out 201 heater motor? Maybe brushes won't solve the problem. Maybe the bearings or commutator are just worn out. installation is quick with this complete new aftermarket Unit. This will fit all 201 models from 1984 to 1993.
Fits the following: All 124 chassis sedans, coupes, and wagons from 1986 to 1993. NOTE: WILL NOT WORK ON MODELS W/ DUST FILTER. We are finding more heater fan motor failures in the 124 chassis cars as they age.