Search | Physical Product | New

Displaying 201 - 250 of 1255
$150.00
Currently out of stock.

1986 to 1993 W201 Driver Side Original Bosch European Headlight

Fits 190E 2.3 and 2.6 and 190D sedans

Good used euro left headlight as shown. This is the actual part you will receive. We cannot guarantee that all the bulbs will work as this light  has been in Kent's storage for 20 years. 

Sale
$180.00

Mercedes 190SL Original Factory Manuals - 2 Book Set

Very good condition for the age. Only minor fading of the covers, but super clean inside.

Originally this was a two-book set. The larger book covered all things related to the 190 Ponton. Most mechanical components were the same between the sedans and the SL. The supplement manual covers those things related specifically to the SL - body, top, twin carbs, etc.

Sale
$16.00

Metric Odd Ball Wrench Set - 16mm and 18mm

Missing in many tool sets - but you may need these on the newer models.

It seems like you never needed a 16mm or 18mm wrench or socket until 1996.  After the intro of the W210 things changed. This set of 3 quality U.S. made tools consists of an 18mm stubby combo, an 18mm deep 3/8 drive socket, and a 16mm short 3/8 drive socket.

 

$225.00

1972 to 1976 W114 W115 Power to Manual Crank Window Conversion Kit

For all four doors included some hardware as noted. Get rid of power window problems for ever!

These were removed from a W115 240D. The holes in the power window models are in the same location so this is a direct bolt it. You must cut small round holes in your door panels for the window cranks. All regulators are in good condition.

$52.00
Currently out of stock.

W123 Chassis Sedan Driver Side REAR Door Seal

Fits sedans only from 1977 to 1985 240D 300D 230 280E - STOP the wind noise and the water leaks.

New LEFT side rear door seal for sedans only. Excellent quality aftermarket part with a good fit. If you need instructions, please look below to see the special tools that come with them.

$27.50

W113 W108 W109 Long Curved Transmission Oil Cooler Hose

A/T Cooling - w/ Spring (250mm long + Elbow) - Flexible design with protective wire coil.

This fits a number of lmid 1960s to early 1970s models with automatic transmission. 250SL 280SL 250S 250SE 280S 280SE 280SE 300SEL. Check under the front of your car to make sure this matches what you have before ordering. 

$23.80

Hand Wheel Bearing Packing Tool

You will be amazed how fast and how efficient this tool works!

Flushes Out Old Grease and Repacks Bearings with Less Mess. This Handy Packer works on bearings up to 3 1/2" O.D.

$16.80

5/16" or 8 mm Fuel Hose Smooth Clamp Set of 16

Rounded edges keep from cutting hose. Best clamp to use for high pressure ( ie. D-Jetronic or other fuel injection )

Excellent quality zinc plated hose clamps as shown. These can be tighten with a straight blade screw driver or a 7mm socket or nut driver. 

$9.60

Automatic Transmission Inside Pan Protection Magnets x 2

These will work in any automatic transmission from 1968 up to 2004 including the 722.6 transmission. The 7G 722.9 has magnets in it.

Kent is a firm believer in using these strong magnets inside a transmission pan to help extend its useful life. 

They should be placed toward the rear of the pan as shown in the picture below.

Sale
$6.00

Small Universal 4" 2 Jaw Puller

CLEARANCE: Can be used to "pull" various small parts off shafts, etc. Not big enough to use on gas or Diesel engine front seal races.

This the exact puller you will receive. Handy for small jobs.

$19.75

1977 to 1985 W123 Glove Box Loose Hinge Repair Kit

Fix glove box rattles and door alignment on a 240D 300D 300CD 300TD 280CE 280E 280TE

One very minor weakness on the W123 is the glove box door. This is because 2 of the key stress points built into the door are made of plastic. One would be the pin holding the latching mechanism ( Kent already has a repair kit for that - see related products.

$9.75

Small Metric O-Ring Assortment in Divided and Marked Case

172 pieces. Very handy to have in your "shop." These are all small and sometimes hard to find

Have you ever had to drive to the local hardware store to find a small o-ring? How much did that cost you in time and fuel? These are all small metric sizes. In the picture below, you can see the included sizes.

$16.25

450 380 500 420 560 V8 Air Filter Housing Bottom Seal

Fits all M116 and M117 V8 CIS engines from 1976 to 1991

This can replace that old, hardened, and worn-out seal at the bottom of your V8 air filter housing to prevent dirt and dust from entering your. Check yours soon to see how tight it fits on top of the fuel distributor. 

$89.70

1978 to 1985 Turbo Diesel Oil Cooler Thermosat

The MOST little known and often overlooked part on the OM617 engine! And when it fails it can affect your engine cooling temp.

Even many old-time Mercedes diesel "experts" are surprised about this part. It is so unknown that it never gets replaced in the oil filter housing, meaning that almost all of them are no longer working today. Watch the video below, and Kent will explain its location and function.

$22.80

1986 to 1991 420 560 V8 Engine Thermostat 80C

For 420 SEL 560SEL 560SEC and 560SL

If your engine is taking too long to heat up or is constantly running "hot" it is probably time to replace the thermostat. Kent explains in the video below some other parts you should consider replacing at the same time.

$79.80

1986 to 1991 420 560 V8 Engine Water Pump

High Quality Graf Brand with cast iron impeller for 420 SEL 560SEL 560SEC and 560SL

New water pump and gasket as shown. Plan to change the short hose and thermostat at the same time. Inspect v-belts and change if cracked.

$58.95

1986 to 1991 420 560 V8 A/C Idler Pulley

OEM part for 420SEL, 560SEL, 560SEC and 560SL.

The bearing in this pulley wears out at 80,000 to 120,000 miles and can cause rumbling sounds while the engine is running. A good time to plan to replace or at least inspect this is when you change the V-belts.

$24.00

1998 To 2006 M112 V6 Engine Valve Cover Gaskets

Both right and left side included. See other parts you may need in related products below.

Gaskets only here. If you need instructions or other parts related to valve cover removal please see related products below.

$26.00

W108 W109 W114 W115 W123 Interior Door Panel Clips - 24 PAK

Have these on hand if you plan to remove your door panels on any of these older models

Many of these, especially along the bottom of the hard are hard and brittle and will break when removing the panel. Tilt and twist to remove and install in the holde. Sold in a bag of 24.

$78.00

230SL 250SL 280SL 350SL 450SL 380SL Front Wheel Bearing Kit

Early W113 and R107 SL kit. For both sides. Quality U.S.A. made bearings and free high performance grease included.

Almost every early SL Kent comes across needs new front wheel bearings. These get so neglected and hardly ever replaced. We are offering a very high quality kit as shown above that will include free grease for your new wheel bearings.

$118.00

6.3 V/8 Injection Pump De-Gunking and Flow Test Kit Lines and Hoses

For a 6.3 that has not run in years this is the best way to determine if the expensive injection pump is ok

Watch the video below to understand what this kit can do. Kent used it on his 6.3, which had sat outside and had not run in 18 years. The 6.3 injection pump is rare, to say the least, and can be very expensive to overhaul. Treat it with great care!

$28.50

1965 to 1991 Sedans and Wagons Plastic Door Liner Replacement Kit

Enough plastic and adhesive for four doors, including SEL models. Video instructions for plastic sheet replacement are included.

If you own an older Mercedes sedan or wagon, it is a very good idea to remove all four door panels, repair components, clean drains, and, most importantly, lubricate all moving parts, as Kent explains in numerous YouTube videos.

$288.00

1977 to 1985 Mercedes W123 Front End Ride Restoration Kit

These are the key parts you will need to replace to restore the original ride and road feel on your old 240D, 300D, 300CD, 300TD, 280E and 280CE.

SAVE BIG! These critical front suspension parts will restore the factory road feel on your old 123. Watch the video as Kent will explain what they are, where they do, and what is involved in replacing them. 

This kit contains the following new parts:

$15.75

Kent's Miracle Lube for Hinges, Pivots, Ball Sockets and Linkages

His special formula mix of two expensive lubricants to create just the right viscosity and holding power.

Kent has been working on this for a few years now. You know how much he likes lubrication. He wanted a deep, penetrating, and longer-lasting lube than what he was able to find on the market - and he has tried dozens.

$15.50

Kent's Miracle Protectant for Rubber and Plastic.

4 oz squeeze bottle with extras. Super penetration, long-lasting, dust repellent with eye-pleasing results.

Even Kent is amazed at how well this works and especially how he discovered it. It is a mix of two components (chemicals) that are super slippery and create a deep shine "new look" on old plastic and rubber trim parts. The included four oz.

$34.00

1981 to 1989 R107 380SL 560SL Transmission Kick Down Cable - NEW

Also know as the Bowden cable. If broken or out of adjustment your transmission will not shift properly. NEW o-ring included and installed

Inspect for adjustment and tension. If you disconnect the cable from the throttle linkage and there is no spring back pressure then the cable is broken.  

New o-ring seal installed.

$59.00

1981 to 1995 722.3 722.4 722.5 New Transmission Pan Replacement w/ Magnets

Fits many models during that period. See complete list below. Late W123, Late R107, W126, W201, W124, R129 and W140

These transmission pans get "out of shape" due to over-torquing the bolts. That crushes the stops (see below), and when that happens, it is very hard to get the pan seal not to leak. Your best option if you are doing a transmission service is to replace the pan.

$38.95

1981 to 1991 W126 Sedan and SEC Coupe Power Steering Hose

For gasoline V8 models only. See Model List Below: Common leak hose.

This high pressure hose is a common leak area on the 126 gasoline V8 models. If you see oil drips just aft of your power steering pump it is probably this hose.

$8.50

Super Thin 14mm Combination Wrench for CIS Pressure Tester Fittings

For tightening and holding the small adapter fitting that goes into the fuel distributor

When pressure testing your KE-jetronic fuel injection,  you may find you need a really thin wrench to install the small fitting on the right side bottom of the fuel distributor.

$114.60

1976 to 1980 450 V8 and 6.9 2-Hole Fuel System Accumulator

It does not fit all 450SL, 450SLC, 450SE, and 450SEL models. Some had a single-hole accumulator. You MUST remove the FID cover and inspect it before ordering.

This accumulator was unique in the mid to late 1970s. It was used on all 6.9s but only some 450 V8 models. That is why you MUST know which type you have BEFORE ordering. You can clearly see the two threaded holes coming into the front of the accumulator housing.

$28.75

1981 to 1985 722.3 Turbo Diesel Transmission Bowden Cable Removable Tool

Revised version - now a modified vise grip for stronger hold and easier adjustment. It can be used to remove stubborn fuel hoses as well.

Also works on 380SL and 560SL transmissions. Before you think you can easily remove the Bowden cable from the transmission, watch the video below.

$99.99

1976 to 1985 R107 Fuel Distributor Inlet Fuel Feed Hose

Fits 450SL, 450SLC, and 380SL with K-Jetronic Fuel Injection

As a safety preventative measure, replace this hose if it shows signs of hardening or cracking. This hose is under 90 psi; if it cracks and spews fuel, you can have an instant engine fire.

$19.75

1981 to 1984 722.3 Transmission Pesky Leak Fix Kit

For 5-cylinder turbo diesel engined 300D 300CD 300TD and 3000SD. Tool not included ( purchase separately below).

These transmissions are now 40+ years old, and with age comes hardened o-rings and seals, leading to what I call "pesky" leaks.

$88.75

M112 V6 Complete Breather and Valve Cover Oil Leak Repair Kit w/ Video Instructions.

For all 1998 to 2006 M112 6-cylinder engines. These engines are now 20+ years old, making VC oil leaks a very common issue, and most shops don't fix them to last.

Kent and others have seen valve cover leaks return within a few years after resealing. Some feel this may be a design flaw, but I contend the job was never done right in the first place. Let Kent explain why the leaks come back...

$220.00

2000 to 2006 CL500 AND S500 ABC Conversion - Standard Power Steering Pump and Tank Upgrade Kit

Are you converting your W215 OR W220 from ABC to coil-over suspension? Get rid of the old heavy tandem bump and extra tanks. WILL NOT FIT AMG MODELS.

I know that many, including some coil-over sellers, recommend just leaving the original pump and hoses in place and plugging them where they attach to the four struts, but I can almost guarantee you will have problems in the future, either with a noisy failing pump, leaking hydraulics, or a possi

$12.00

M112 V6 M113 V8 Breather Hose Plastic Couplings x 3

These are hard plastic, and they connect your breather hoses together. Most often they can be reused.

They can often be reused if you carefully cut the hardened rubber away from the coupling. If you prefer new here you go. Three are included here and that is the total used on your V6 or V8 engine up through 2006.

$9.80

M112 V6 M113 V8 Breather Hoses to Manifold Connector

4 breather hoses connect to this rubber must-connector at the rear of the intake manifold. Instructions are included with the 4-hose replacement kit.

Depending on the age and mileage of your V6 or V8 engine, this part may or may not need to be changed when you replace the breather hoses. You can check before ordering. If the part is still soft and rubbery, then it most likely can be reused.

$80.00

W116 and W123 Upper Control Arm Set

Both right and left side. Replace both - if one is bad the other is not too far behind!

New left AND right side upper control arms. They will fit ALL W116 chassis from 1973 to 1980 ( except 6.9 ), and ALL W123 chassis sedans, coupes and wagons from 1977 to 1985.

$68.00

722.9 Transmission Fluid Service Fittings and Fill Hose - Partial Kit

For 2003 to 2016 7-speed automatics that require filling from under the car. For use with Red or Blue Fluid. You supply your own pressure fill tank (garden sprayer).

This kit will allow you to properly fill any 722.9 7 speed automatic transmission as well as other cars that use the underfill method.

Sale
$65.00
Currently out of stock.

1978 300SD Turbo Diesel Factory Intro to Service Manual - Rare

IIS. Worldwide acclaim was gained with the introduction of the 5-cylinder turbo diesel engine. One of the best engines every built by Mercedes.

There is some great technical and service information in this manual. It was given to dealers to introduce them to the fabulous OM617 turbo diesel introduced in the W116 in 1978. 115 pages in length.

Pages