This is an original first aid kit. It came out of a 1981 300D. Contents look mostly complete and are original. I have 2 so it may or may not exactly have everythings inside as shown below. It probably should not be used as a first aid kit. This should be for original cosmetic purposes only.
Make certain your pump only has one main line coming into it. Very good cover plate as shown. No cracks or wear. No other parts included. To be used if your cover plate gets damaged. Sorry no complete used pumps available.
USED
Like new condition. Handle was new OEM replacement a year ago. No droop in the handle - No cracks in the frame. Good hinge. The chrome surround and plastic cover are excellent.
If you have a leaking transmission seal it can be a real bear to get the old seals out without this puller tool. It works on both the front and rear transmission shaft seals. This tool also works great for removing the front crank seal on both gas and diesel engines.
Two replacement levers as shown. NOTE: Often the valves are still ok but the lever is worn off.
Common diesel transmission leak source. These aluminum washers fit on each side of the banjo connection where the oil cooler lines bolt to the right and left front side of the transmission case. Fit 300D 300TD 300CD and 300SD with automatic transmissions from 1981 to 1985.
This complete kit ncludes both inner and outer rear end wheel bearings and seals with groove nut and grease. Fits chassis listing above including the 123 300TD wagon, from 1974 to 1991. If you need bearings for both sides order 2 of these kits.
This is a maximum thickness rubber shim (19 mm thick) to adjust the ride height when installing new or reinstalling existing rear coil springs. Two required per car. Also fits 114, 115, 116, 123 sedans and coupes and 126 chassis cars.
These special springs are unique to wagons only. They are designed to only support the weight of the car when it is unloaded. With age and malfunction hydraulic struts these springs can weaken and allow the rear of the vehicle to sag.
Ground shipping only. Can not ship internationally. There are two gas filled accumulators of this style under the rear of the 1979 to 1991 123 300TD wagons, 201 190E 16v and 126 560SEL sedan and 560SEC coupes with self leveling rear suspension ( SLS ).
Brand new thermostat, heavy-duty short hose, and 2 new clamps. Fits all 126 Chassis 380 engines from 1981 to 1985 both in 107 chassis and 126 Chassis. Free Video installation tips included ( click on the arrow in the center of the picture to watch below:
This item can only be shipped UPS Ground because it is a liquid. One Liter of correct Power steering fluid. Fully compatible with Dexron II systems but has enhanced aditives to reduce steering box gear wear.
Note: Works only on models with two vacuum lines exiting the pump cover. I am seeing many vacuum pump problems on the older diesels. They are reaching that age regardless of mileage, where the pumps are failing right and left.
NOTE: INSTRUCTIONS ARE FOR REFERENCE ONLY. These old instructions talk about using our "kit" to complete the installation, but we no longer offer the kit. Heating your engine oil overnight is one of the best things you can do to prolong the life of your engine.
Fits 124, 126 and 201 chassis - 124 Chassis 300E 2.6, 260E, 300E, 1986-1992, 1988-1989 300CE, 126 Chassis 300SE, 300SEL, 1988-1991, 201 Chassis 190E 2.6, 1987-1993.
Brand new Bosch Distributor rotor for above models.
Brand new Distributor Cap for 103 Engines from 1986 to 1992.
Each fuel pump has a critical check valve mounted at the pump outlet. The purpose of this check valve is to prevent fuel from leaking back through the pump after the engine has been shut down. Constant fuel pressure must be held in the fuel system for the engine to restart quickly.
When these part wears, the control rod will move back and forwar and the joints will clunk when you go over bumps. This is becoming a very common failure part on these older 123 chassis. We provide you with replacements for BOTH sides (inner and outer as shown).
Common 123 front end wear item. Bushings attach the lower control arm to the frame. Rubber fails and front end gets loose and noisy.
Location of lower control arm bushing
Bushing kit that attaches the front suspension guide rod to the lower control arm. This is a wear point that is often neglected and if loose can cause clunking in the front end. This is a complete kit for both sides. 2 kits included.
These bushing go on either side of the upper control arm where it attaches to the stabilizer arm. These should be replaced if worn or installed new upper control arms. SOLD IN A SET OF 4 as required by car. See related products below for the upper control arms that these bushing fit into.
Only one available. Good working and tested used electric aux fan and shroud. Hard to find. Keep in mind this is a used unit but it is a very good one. Fan runs strong and reasonable quiet ( no loud bearing noise), NO BRACKETS OR MOUNTING TABS. you will use those from your existing fan.
IF YOUR HEADLIGHT WON'T ADJUST YOU NEED THIS PART! Excellent used unit for left front fender headlight bucket. No damage and very straight. Good adjuster assemblies.
Application:
Brand New Engine block gasket set for 4 cylinder 240D.
Only ONE available at this price. This quality used part will fit 123 diesel models from 1977 to 1985. This included models 240D 240TD 300D 300CD and 300TD unless otherwise noted.
When replacing front brake discs on above chassis it is highly recommend you replace the bolts that hold the rotor to the bearing hub. Not needed on 201 124 or 129 chassis. Sold individually. 5 required per wheel.
.Please review picture. What you see is what you get. 3 different lengths.
Misc assortment of bolts for 240D, 300D, 300CD, 300TD, and 300SD 1977 to 1985. Please review picture. What you see is what you get. No guarantee that all the bolts in this bag will fit one of the specific models listed above.
The fuel accumulator maintains the pressure in the fuel system for a certain time after the engine has been switched off. When the engine is running it serves to deaden the noise of the electric fuel pump.
Brand new Auto transmission torque converter drain plug for All Mercedes, gasoline and diesel, from the late 60s up to the late 90s. If you are doing a complete transmission flush you will need to drain the torque converter. Good to have spare on hand!
Brand New short banjo bolt. Fits on top of injection pump on 617 Turbo Diesel ALDA and on 4 and 5 cylinder diesel water pump bypass pipes (often broken or rusty).
New aluminum washers (2) for long banjo bolt at rear of intake manifold and also for short banjo bolt at connection to ALDA on top of injection pump. These banjo bolts MUST not leak. These aluminum washers are often missing or damaged. Two washers required for each banjo bolt.
For use with the following modesl below. Check size if unsure.
Brand new rubber brake pedal pad. Fits many 1960s models. Make sure this will fit your car. This pedal measures at 2 3/4 height x 2 3/4 width at largest part.
New rubber stop for rear exhaust bracket. It plugs into the body right above the back of the rear muffler. Helps prevent rattle. Fits almost all models from late 1960s to mid 1990s. When you hear something clunking in the back when you go over a bump, this part is probably missing.
GENUINE MERCEDES BENZ PART.
Factory style plug discontined -- no longer available.
Plugs the rear most fuel injector on all diesel passenger cars from 1968 to 1995!
Buy a lemonhead for ten cents when added to any order including other item(s).
Limit 10 per customer
For 300D 300TD 300CD 300SD Major Engine Repair / Overhaul
Excellent used vacuum shutoff valve. Original Mercedes Part. Tested to hold vacuum. Operates and holds and releases vacuum correctly. Includes used gaskets that are still usable, mounting plate and bolts as shown.
-Please note 8 bolts required per engine
-Please note 5 bolts required per engine
Good, used, straight, older aluminum factory wheel. Above average condition. No corrosion or major curb lip damage. No gouges. No bolts or center cap included. This is the narrow wheel for smaller-bodied Mercedes 14 x 6 inches. Not for the S and SL classes.
One of the more common reasons for front end clunking over rough ground and sweeking when you turn your steering wheel. This is your set of right and left high quality ball joints. They fit Gasoline and Diesel Model Mercedes from 1973 to 1991 ONLY on the 116, 123, and 126 chassis.
For reasons of hoping to solve fuel filter leak problems Mercedes changed the center bolt design in some 1984 to 1985 model 123 300D 300TD 300CD and 126 300SD. Instead of one o-ring on the bolt they changed it to two orings (as shown iin the picture.
LAST OF INVENTORY MAY 2025 -- ONLY TWO LEFT IN STOCK -- INVENTOR SET
New full set of Meyle brake pads for both front wheels. They pads are scorched at the factory for rapid seating and reduced brake in period. Fit all model 201 chassis sedans from 1984 to 1993