90 percent of the above chassis Kent inspects need to have these front subframe mounts replaced. They are more often than not all broken up or rotted. If your front end seems to be moving around on you while driving or drops down when you lift the car - then replace these rubber mounts.
FITS THE FOLLOWING: 1985 to 1993 W124, W126, and W201 chassis with a 6 cylinder 103 engine. Is your M103 six cylinder engine not running as smoothly as it use to. These wires should be changed at 70,0000 to 80,000 miles for smooth running and peak performance.
Fits 124 201 126 Chassis with M103 engine only, including 190E 260E 300E 300TE 300CE 300SE and 300SEL . These are the current plugs Kent recommends for this 6 cylinder gas engine.
Fits All 115, 116, 123, and 126 5 Cylinder Diesel engines. This kit comes with (4) brand new fan clutch bolts that we source and custom machine here in our shop.
This Special Brass fitting can be used when making a electric boost heater for biodiesel or vegetable oil fuel conversions. It CAN NOT be installed in a diesel cylinder head. It can be used in the fuel system with all diesel engines that have been converted to SVO.
Fits 201, 126 (after 1986), 124 and 140 chassis four, five and six-cylinder diesel to 1995. This includes 190D, 300D, 300TD, 300D 2.5, 300SDL, 350SD / L ,S350, and E300D. Set of two new oil filters. Stock for spares ahead of time. Two oil filters shipped with sealing rings.
FITS THE FOLLOWING: 201 chassis 190D 2.2 and 2.5 diesels from 1984 to 1989. 124 chassis 300D and 300TD 1987 and 1990 to 1993. 126 chassis 300SDL and 350SDL 1986-87 and 1990-91. Get your later model Mercedes diesel ready for winter driving with this self service kit.
For *most 123 chassis cars made from 1977 to 1985 and *mostl 116 chassis sedans built from 1973 to 1980. The PDF repair guide will take you through the process of how to properly remove your heater blower motor and replace the motors two brushes.
Fits 116, 123 and 126 chassis diesel 1977 to 1985 only. 240D 300D 300CD 300TD 300SD 1977 to 1985
FITS THE FOLLOWING 201 chassis 124 chassis ( 1986 - 1990 300E , 260E , 300CE and 300TE ). If you are experiencing rough idle, poor throttle response, or your gas mileage has gone down recently, it is probably time to replace your oxygen sensor (it is located under the car on top the forw
Fits later 107 and 123 as well as 126, 201, and 124 chassis oil caps (black plastic). Tired of having a hard time getting your oil filler cap off without using pliers. Or are you tired of the unsightly oil leaks around the cap. These gaskets can help solve those problems.
Fits 113, 111, 108, 109, 107, 114, 115, early 107 and 123 chassis: Tired of having a hard time getting your oil filler cap off without using pliers. Or are you tired of the unsightly oil leaks around the cap. These gaskets can help solve those problems.
Fits 115 116 123 and 126 chassis diesel engines, non turbo and turbo, to 1985. This includes the 220D, 240D, 300D 300TD wagon and 300D/300SD turbo engines. Most thermostats only last a few years and should be changed for optimal diesel performance.
Fits the following: 201 chassis 1989 - 1993 190E 2.3 and 2.6 , 1987 - 1989 260E , 1988 - 1989 300CD , 1986 - 1992 300E 1990 - 1993 300E 4Matic, 1990 - 1992 300E 2.6 , 1988 - 1992 300TE , 1990 - 1993 300TE 4Matic, 1988 - 1991 300SE and 300SEL.
Sometimes you need the extra heat! Like when replacing heater motor brushes.
All 124 Chassis sedans, coupes and wagons from 1986 to 1995. Here is how to fix those intermittent dash lights. This kit comes with a new dimmer switch for the dash light control (a bad dimmer is the biggest reason for dash lights not working).
Fits 201, 126 (after 1986) and 124 four, five and six cylinder diesel to 1993. This kit should give you at least a year supply of fuel filters for your diesel. You will receive 2 main fuel filters, 3 clear plastic inline high quality pre-filters, and two main fuel filter o-ring set.
Fits 115 chassis 220D, 240D and 300D to 1976 only. Set of two new filters along with two sets of o-rings and sealing washers. Stock up for spares ahead of time.
FITS 124 201 126 with 103 engine only. This part is cracked or broken in almost every car I have seen. Replace it now at a low price.
Fits the following 108, 111, 113, 114, 115, 116, 107, 123, and 126 chassis with four-bolt mount vicious and fixed fans. NEW IN 2026! Now, a very long 11-inch 10mm wrench with a standard box on one end and a ratcheting box on the other end.
FITS THE FOLLOWING: 114, 115, 107, 123 and 126 to 1985 chassis Mercedes that use the rear axles with the crimped sealed cans over the flex joints (spider). Mercedes rear axles of the 1970s and 1980s are extremely robust.
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126 with adjustable valves. We have had a number of requests to provide our customers with a feeler gauge to adjust their valves, particularly on the 616 and 617 diesel engines.
Applies to the following chassis: 111, 108, 109, 107, 116, and 126. Includes 3.5, 4.5, 350, 380, 450, 500, 420, and 560 V8 engines from 1970 to 1991. When Mercedes introduced their small 3.5-liter V8 in 1970, it was hailed as a technological breakthrough in automotive engine design.
Replacing your oil cooler lines/hoses is a very important maintenance item on your older Mercedes diesel. Getting them on and off though is a different matter!
Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!
Fits 123 and 126 diesels with vacuum dashpot, most models 1980 to 1985. This green dash pot is located right above your transmission vacuum control shifting valve which is located on the rear of your fuel injection pump.