Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
BACK IN STOCK NOVEMBER 2020!!! Includes 30 red plastic clips, a "new style" removal tool and detailed instructions. Note: The instructions included in this kit do not show the actual use of this "new tool".
New heater blower motor assembly with fan and housing. Installation is very easy once you get that pesky under dash panel off on the right side. We do include instructions for that but not for the actual removal of the motor. You will see the 8mm attachment bolts.
For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.
Fits all 123 chassis 1977 to 1985, all 126 chassis 1981 to 1991, all 201 chassis 1984 to 1993 and all 124 chassis 1986 to 1993.
FITS all 116 123 Diesel and Gasoline, and 126 chassis from 1977 to 1985. Finally a socket to remove your fuel tank screen that really works. Most correct size sockets tend to be SO BIG that they require 3/4 inch drive ratchets and extensions to use them. Who has those in their tool box??
Our flexible brake hose kit includes front brake hoses, rear brake hoses, 1 liter high performance brake fluid, 9x11 mm Flare nut wrench, thread sealant, three pairs of nitrile gloves, and complete pictorial instructions.
Our flexible brake hose kit includes front brake hoses, rear brake hoses, 1-liter high-performance brake fluid, 9x11 mm Flare nut wrench, thread sealant and three pairs of nitrile gloves, and complete pictorial instructions.
Have you noticed your Mercedes diesel sedan is recently shaking more at idle. Maybe you are noticing new vibrations that were not there before. You may have also noticed the engine makes some clunking noise when you shut it off. When was the last time your rubber motor mounts were changed.
Brand new original hood star emblem as shown. No instructions included but not difficult to install
For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985. Buy the complete kit and save! If your Garrett T3 turbo has over 200K Kent highly recommends you plan on doing the complete overhaul.
Brand new rear Subframe mount kit made by Meyle, for 126 Chassis from 1986 to 1991, models listed above. No detailed instructions but here are some installation tips.
New Meyle heavy duty subframe mounts will eliminate rear-end wiggle and sway typical on these older chassis. No specific instructions are included but we do offer these tips for successful installation. A small tube of silicone grease and brush applicator are included at no extra charge.
Rear Subframe Mount Kit with rubber bushings for both sides complete with mounting hardware as shown. If your Mercedes rear-end is moving around, out of alignment, or sagging slightly, then your forward trailing arm attach point rubber mounts ( bushing )may be worn out or collapsed.
Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991. PLEASE NOTE. These do not work on the W201 or the W124 chassis.
Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L. 1977 to 1991 (Does not fit wagons!). Wiill NOT work on 107 chassis. Receive a Related Bonus-Product FREE!
Can be successfully applied to all Mercedes Alloy (non chrome) Silver Wheels from 1970 to 1995. 108, 109, 107, 114, 115, 116, 123, 201, 126 and 124 chassis. Most of us have to admit that stained and peeling paint on Mercedes alloy wheels is ugly on any model.
If you are experiencing very hard or less than perfect shifts, a failed transmission modulator could be the problem. New Genuine Mercedes part. This unit is an upgrade over the original. It has a better thrust pin design which is less prone to cause pressure variations in cold weather.
Fits E320 and E320 4MATIC
MERCEDES BENZ C230
MERCEDES BENZ C240
MERCEDES BENZ C320
Brand New Rotors as shown. You will receive 2 fronts as shown. Fits all 126 Chassis Gasoline and Diesel, from 1986 to 1991. Specifically 300SDL 300SE 300SEL 350SD 350SDL 420SEL 560SEL 560SEC.
Brand new Front brake Rotor. Fits 190E and 190D from 1984 to 1986 only! Sold Individually, no instructions.
Fits Gasoline Models only! 1982-1983 380SEC, 1984-1985 380SE, 1984-1985 500SEL, 1987-1993 190E 2.6, 1986 to 1989 300E, 1990 -1993 300E 4matic, 1990-1992 300CE, 1988-1991 300SEL, 1992-1993 400E, 1986-1991 420SEL, 1986-1991 560S
I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.
PLEASE NOTE: You will get the filter and the gasket for the original transmission pan. Make sure your pan is original! This combo includes the three kits listing below. You will get full video instructions and will help you do this and save big $$$.
These are super absorbent, low lint, and have strong birch handles. More than enough to keep you busy for a while.
Only one available. Please do not try to order more.
These are becoming harder to find in good condition. They were often used as the spare tires in these older models.
Off low mileage coupe and in dry storage for the past 25 years. Excellent condition as shown.
This is actually 2 sets of bumpers that will allow you to make one really good set. I have been working to get a nice pair for the past 20 years to go on that perfect 6.9 but time is running out. On to the next enthusiast.
6 "German style" non-cutting hose clamps as shown. These are wider than most to better seal the hose to the fitting. See our other hose clamp assortments below.
In this collection you will receive the CIS pressure testing short kit and all 6 of Kent's videos on Bosch CIS fuel injection theory, tester connections and testing. Click on each link below to read about the specifics of each. This combo kit overs a great savings.
If you plan to replace, test, or service your electronic fuel injectors you first must determine which bottom seals you will need. If you have a 1970 or 1973 model, you most likely have the single-bottom seal (unless your engine has been changed).
Learn how to install this critical repair kit correctly and how to test your monovalve function on the bench. In this 13-minute video, Kent shares how to install the kit while avoiding problems. Get your cabin heat working properly again!
This fits the U.S. models with automatic climate control which include the 1982 to 1989 R107 380SL, 500SL, and 560SL + the 1982 to 1985 W123 ALL models + the 1981 to 1991 W126 sedan and coupes. This is an easy fix that you can do yourself.
Kent has learned that you really can not tell how good your v belts are by just looking at them, especially if they are over 15 years old. Kind of like old tires - they may look good on the outside.
For E430, ML430, E500, E55. S500, CL500, and SL500 through 2003. Every M112 V8 I have worked on starts making front engine bearing noise around 90K to 100K. Almost like clockwork! This is a service you will want to perform whether you have had your Benz for a long time or just purchased one.
Kent walks you through replacing a trunk seal on a 1970 280SL. The video is 13 minutes long and covers removing the old seal, cleaning the groove, trial fitting the new seal, and the final gluing procedure.
In this 24-minute instructional video, Kent shows you more than just how to change the transmission filter and the pan.
In this 19-minute detail instructions, Kent will show you how to get the old seal out, how to trial fit the new seal, and how to glue it in place properly. You can not believe how many seals we see that have not been installed properly.
In this detailed 22-minute video instruction, Kent will show you how to use his kit to perform a power drain on most 1965 to 1995 automatic transmission.
Yes, YOU can fully drain all your transmission without using any type of "power flush." Full detailed video instructions are included. This kit is easy to connect and the process is quick and clean. Watch Kent's YouTube video below for full details.
Only one available used original in good conditon as shown. We also have these new aftermarket. See below.
For the past 20+ years, we have promoted H4 headlight upgrades for these old Mercedes. The original sealed beam headlight bulbs lacked light output, and we found them sometimes downright "sketchy" on dark roads, especially when deer were known to be present.
You will receive ten each of the following sizes: 8/12, 10/16, and 12/22. These are much better than U.S. style hose clamps that cut into the hose.
Kent shares with you 3 key steps that you should consider doing to get your old fuel injected 6 and 8 cylinder engines running properly. These include:
These require removal of the batter and possibly the brake booster to replace. They are split so you do not need to remove the sway bar. Plan to replace if doing work under the battery box area. Battery acid is hard on the right side.
These will no longer be printed when these are gone. They will still be available as a download. All books are signed by Kent. This is an end of an era for us. Most books are approximately 15 pages in length and covered with heavy clear plastic.
DO NOT ORDER UNTIL YOU REMOVE ONE INJECTOR IN YOUR ENGINE AND INSPECT THE HOLE. Sometime in 1974, Mercedes changed the way these injectors were sealed into the head to prevent air leaks. A "YELLOWISH" nylon sleeve was added along with two seals on the lower end of the fuel injector.
This kit has enough red clips (60) to do both sides on the 123 240D, 300D, 300TD, 300CD, 280E, and 280CE. You will receive the best tool to remove the side trim and the best tool to remove the old red clips from the side trim after removal.
Beautiful driver-side front fender, as shown. ALL original light silver blue paint. No rust and no previous damage.