W116 300SD Trunk Emblem and Handle Set - USED
Excellent set of emblems as shown. Very good chrome.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Excellent set of emblems as shown. Very good chrome.
NEW quality aftermarket part. Fits late 123 240D 300D 300CD 300TD 1980 to 1985. Use your existing motor
This is a very common wear item on high mileage 126 chassis. It will start out as a clunking noise when you go over rough ground. When real bad it will be hard to get your car to track right down the road (it will want to wander) and you will experience rapid and uneven tire wear..
For all 201 chassis 190E and 190D built from 1984 to 1993. The PDF download repair guide will take you through the process of how to properly remove your heater blower motor and replace the motors two brushes. This is the most common reason for failure.
Brand new rear Subframe mount kit made by Meyle, for 126 Chassis from 1986 to 1991, models listed above. No detailed instructions but here are some installation tips.
These are rare and very collectible for the performance enthusiast. Each book contains the following: IIS
Here are the titles, dates of printing, and total pages in each of these four factory training booklets. IIS
Originally this was a two-book set. The larger book covered all things related to the 190 Ponton. Most mechanical components were the same between the sedans and the SL. The supplement manual covers those things related specifically to the SL - body, top, twin carbs, etc.
It seems like you never needed a 16mm or 18mm wrench or socket until 1996. After the intro of the W210 things changed. This set of 3 quality U.S. made tools consists of an 18mm stubby combo, an 18mm deep 3/8 drive socket, and a 16mm short 3/8 drive socket.
This the exact puller you will receive. Handy for small jobs.
SAVE BIG! These critical front suspension parts will restore the factory road feel on your old 123. Watch the video as Kent will explain what they are, where they do, and what is involved in replacing them.
This kit contains the following new parts:
This Introduction manual is intended to familiarize technical personnel with the Registration year 1976 Passenger Cars. This covers changes and new developments, it does not cover all repair information on the included chassis. 87 Pages
This introduction into service for the year 1973 introduces the W 116 Models: 450 SE (116.032) & 450 SEL (116.033). Manual Contents: General Description of vehicle components, Assembly, inspection and adjusting procedures, Testing and Tuning Data, Maintenance instructions, tools and Equipment
I can now offer a unique digital meter and several attachments in a convenient carrying case that I can grab and go with anytime. Are you tired of fussing with your standard meter straight-tip probes? I think they are worthless.
High quality fast break in pads with special coated anti-squeal pad bonded to the back side of the pad. We include 4 new sensor wires and a small ceramic brake pad grease to lube the pad edges and the pins. ( no need to lube the back side).
Kent was a little skeptical when you first used this—it sounded like it would be too good to be true. The first use was getting some rusty bolts off the Garrett T3 turbine housing ( some of you know the pain there!). Well, it worked, and it worked very well.
It is really frustrating when you doing a job on your Benz and find it needs a 16mm or 18mm tool and you don't have it. Most of the older sets of wrenches and sockets did not include these two sizes. Just before and after 2000 Mercedes started using more of these size nuts and bolts.
You will love this set of long combiination wrenches. Nice plating, smooth surface and thin heads to get into tight places.
Here is a grab bag of fittings and hoses you can buy for DIY fuel system projects. Since we don't have use for these at this time, we are offering them at a special giveaway price. PLEASE BE AWARE THAT NONE WILL work without modification on any CIS fuel-injected engine.
This high-quality meter can test all types of automotive electrical circuits, but Kent has discovered it is particularly well suited for testing Bosch KE jetronic fuel injection components on those CIS models from 1984 to 1993. Extra adapter fittings are included as shown.
For 2000 to 2006 chassis only mentioned in the title. The kit, includes a new tank with a built-in filter screen, a new correct seal, a syringe to extract the old fluid, hose, and caps to complete a full fluid flush. The instructions will show the installation of the external magnetic filter (ava
Quality aftermarket part. If over 80,000 miles, replace this part when you replace your serpentine belt. Kent's custom tensioner tool is available separately below to help make the install of this new tensioner a "snap."
PLEASE NOTE: Wire color may be all red or all black (depending on stock on hand) Performing some fuel pressure tests on your K-jet or KE-jet engine
A great alternative to Bilstein shocks at almost half the price! Watch the video below as Kent explains why he put these shocks on his W113 280SL. These are special order parts and depending on supply issues it may take up to 5 days before they can be shipped.
If you are looking for a way to really beautify your classic Benz engine compartment this could be it. These hardly ever get changed and most are stained and ugly. This is a genuine OEM part with rubber seals included. MAKE CERTAIN yours matches in size and shape before ordering.
This is the most complete 1970 to 1975 V8 injector repair kit you can find anywhere.
Good used set of valves for OM617 turbo cylinder heat. Includes all parts as shown (valves, springs, rotators, and spring caps. 10 THIN adjusting nuts INCLUDED. No valve cap nuts. Only parts shown in the picture are the actual items you will receive.
LAST SET WE HAVE. Best you can get for your 300SEL
FREE steel liner included as shown. Brand new old stock. Size on top of piston is 91.47
Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.
Study the picture carefully. This is exactly what you will receive. Only one available
This is an “introduction to service” manual that was supplied to dealer service departments to help familiarize them with 1988 models or changes to existing models. There is a ton of good information in this manual that you will not find anywhere else (including wiring diagrams).
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five USED wheel bolts that are not all rusty.
If your 560SL key starts to stick, is stuck, and won't turn, or you have lost your key this is your solution. In the first two situations, your lock is probably worn out, and trying to change out the tumbler will not solve the problem.
We are not kidding when we say to get them while you can. Genuine Mercedes replacements are now at $500. When you see prices go up like this you know that supply may be dwindling.
Great find, especially if you are a W111 coupe convertible enthusiast. This introduction manual is intended to familiarize technical personnel with the W109 and W111 series vehicles and the M116 V8 engine.
This 17-minute video will cover the removal of an old Hirschmann power antenna and then Kent will show you how to troubleshoot the wiring plug in the car to see if you are getting proper power back to the antenna. No sense in replacing a faulty antenna until you make sure your wiring is OK!
In this 30-minute instructional video, Kent will walk you through the steps to remove your old antenna, test and troubleshoot your wiring plug coming to the antenna, and install our aftermarket antenna using the special wiring connectors we include in the kit.
This will hold the top of the strut and keep it from turning when removing and installing the 22mm nut.
Newly rebuilt driver and passenger side front calipers WITH NEW CERAMIC ( low dust ) brake pads. Fits all W123 chassis 240D 300D 300CD 300TD 280E 280CE 1977 to 1985. Please note there is NO HASSLE CORE CHARGE.
Damage-free 108 front fenders, front bumper, rear bumper, hood, and trunk lid These parts all came off a 1968 low mileage 280S that sat in a warm garage since 1978. This happens to the parts on an old car when it never leaves a warm garage for 40 years! Sorry, we can not ship them.
Fits the following: All 5 cylinder diesel engines from 1975 to 1985. For 300D 300TD 300CD 300SD, PDF instructions included. This is the critical inside wear part of the injector that delivers the fuel spray into the cylinder. These are direct replacement new fuel injector nozzles from Bosch.
Fits the following: All 4 cylinder diesel engines from 1968 to 1985, including 201 Chassis 190D 2.2. For 220D 240D and 190D 2.2 Engines - FREE heat shield washers - PDF download instructions included.
BRAND NEW OE breather parts as shown. Make sure these match the ones on your W201 190D before ordering. Includes breather tube and new valve cover seal.
This is a very high quality finish wrench set. The 13mm combination wrench that is 8 inches long. The 17mm has a ratcheting box end great for alternators, bumpers, etc. and is 11 inches long. The 18mm for 1996+ models is also 11 inches long.
Brand new passenger side rear door power window regulator. Motor not included
Fits the following 126 models:
New RIGHT FRONT door seal on 4 door sedans only. Only seal shipped. No clips or instructions.
This is a high quality aftermarket part which I believe to be better than the original. And I have not been all that impressed with the original part. Then tend to fail way too often. You will need to remove the door panel to get to this unit. Video included in your account.
New Factory reproduction of original owners handbook. Excellent condition.