Search | W126 | Brake

Displaying 1 - 50 of 51
On Demand Video
Dragging Brake Dust - On Demand Video
$9.99

Testing for and Troubleshooting Causes of Dragging / Sticking Brakes - On Demand Video

Could be multiple causes - don't assume it is a bad caliper!

Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire. 

 

$32.50

Frozen Brake Caliper Piston Removal Pump Adapter Hose

Only works with Mercedessource Injector Pressure Tester - FREE VIDEO INSTRUCTIONS

This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.

On Demand Video
Mercedes Brake Caliper Removal - On Demand Video
$6.99

Brake Caliper Rebuilding Part 1: How to Remove Frozen Pistons From Brake Calipers - On Demand Video

Part 1 of 3 Parts: For Mercedes brake calipers from the early 1960's to the late 1990's

You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.

On Demand Video
Mercedes Front Rotor Removal - On Demand Video
$3.99

Removing the Front Brake Rotor from the Bearing Hub - On Demand Video

Kent will show you some tips on how to remove and replace that front rotor on the older model front hubs

Installing new front rotors on older model Mercedes requires that you remove the rotor from the bearing hub and bolt the new rotor back on. Sounds easy right? Sometimes not! The bolts are on very tight and often take a lot of torque to remove. How do you hold the break rotor while doing this?

$29.95

SPECIAL PURCHASE CERAMIC Rear Brake Pads - Most Models 1968 to 1991

FREE CERAMIC BRAKE GREASE. Full set for left and right rear calipers. Fits R107 W108 W109 W111 W113 W114 W115 W116 W123 and W126 chassis - NOT for 201 or 124 Chassis

FITS THE FOLLOWING: all W107, W108, 109, W111, W113, W114, W115, W116, W123 and W126 chassis from 1969 to 1991. See models listed below. NOTE: Four pads included for both sides of rear axle. Tired of excess brake dust and poor performance during heavy braking? These are amazing brake pads.

$64.75

Pressure Brake Bleeder

As of Jan. 2020 this pressure tank can now perform a cooling system pressure leak test as well . Kent's 2-in-1 invention. See below to purchase the pressure testing cap.

When used for bleeding or flushing your brake system, a single person can do a rapid fluid flush!  No mess and very efficient. Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below: 25-minute video instructions are now included.

$9.75

Genuine Brake Pad Paste ( 2 Pack )

Applicable for all models with disk brakes

There are other brands of brake pad anti-squeal paste on the market, but for me the factory Mercedes paste has proven to be the most effective. It simply stays in place and holds up better over the long haul.

Mercedes Brake Pad Sensor Wires Set of 8
$14.50

Mercedes Brake Pad Sensor Wires Set of 8

Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991.

This is a set of 8 Front brake pad sensor wires. The front brakes require two per side. Nice to have spares on hand!

$22.75

Twin Chamber Brake Fluid Capture Bottle

The best way to flush your brake system fast without creating a mess in the process!

Born out of frustration this twin chamber plastic bottle has solved two of Kent's biggest head aches when brake bleeding or flushing brake systems.

$98.00

Complete Pressure Brake Bleeding and Flushing Kit w/ Instructions

For use on most Mercedes from 1968 to 2004(6) See List - UPS Ground Shipping ONLY! - 25 minute Video instructions now included

For use on most Mercedes from 1969 to 2006 (see exceptions below)- UPS Ground Shipping ONLY! Buy the complete kit and save $$. This is almost everything you need to do a fast, clean and efficient brake fluid flush on your older Mercedes Benz passenger car.

$7.95

107 116 123 126 Front Brake Pad Wear Sensor wires x 4

Plan to have to change these every time you change pads. Even if they look good they often break upon removal.

Fits the Following: All 107,116,123 and 126 Chassis from 1973-1991. PLEASE NOTE. These do not work on the W201 or the W124 chassis. 

Sale
$40.00

Late W126 Chassis Sedan and Coupe Front Brake Rotor Set of 2

CLEARANCE!! SET OF TWO

Fits 126 years 1986 to 1991 

Brand New Rotors as shown. You will receive 2 fronts as shown. Fits all 126 Chassis Gasoline and Diesel, from 1986 to 1991.

Specifically 300SDL 300SE 300SEL 350SD 350SDL 420SEL 560SEL 560SEC.

$49.00

All W123 R107 380SL Most W126 Premium Ceramic Front Brake Pads.

Special Purchase: Includes sensor wires. Does not fit 560SEC or 560SL.

High quality fast break in pads with special coated anti-squeal pad bonded to the back side of the pad.  We include 4 new sensor wires and a small ceramic brake pad grease to lube the pad edges and the pins. ( no need to lube the back side).

$24.50

Brake Master Cylinder Air Bleeding Kit with FULL Video Instructions

This bleeder kit is primarily for bench bleeding in a vise but can also be used to bleed an air-locked master cylinder on the car. Custom wrench included.

This procedure is a must do anytime you install a new master cylinder or allow fluid to completely leak out of your master cylinder.

On Demand Video
$10.99

Master Cylinder Removal, Bench Bleeding, and Replacement Instructions - On Demand Video

Covers most master cylinders 1968 to 1995. Learn to do it right with minimal loss of fluid and mess.

In this 30 minute instructional video Kent will use a 1972 300SEL 4.5 to show you how to remove the master cylinder with minimal spillage, how to install the tank and bench bleed a new master cylinder, and how to reinstall it with minimal brake fluid spillage while protecting your car's paint. 

$189.50

1972 to 1991 Most Models New COATED Rear Brake Brake Caliper Set

Amazing aftermarket quality - why rebuilt when you can buy. new! Complete with PERFORMANCE CERAMIC brake pads and FREE extras. - PDF brake repair manual included FREE of charge.

Fits chassis models W114 W115 W116 R107(except 500SL and 560SL)W123 (do NOT FIT WAGONS) and W126 ( except 500 series 500SEL, 560SEL, 560SEC) from 1972 to 1991.

$66.50

1968 to 1991 Most Models Parking Brake Shoe Replacement Kit with Extras

Kent's special tool and video instructions included. See applicable chassis and model list below BEFORE ordering.

Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.

$30.00

Do-It-Right DIY Brake Repair Accessory Kit

You want your brake job done right with results that will last and prevent future brake squeal, brake shimmy, and poor pedal response? This is what you need!

Whether your just changing pads, hoses, or doing a complete brake system overhaul, the items we include in this DIY will guarantee the job gets done with no mistakes, minimum frustration, and lasting results. There is no other kit like this anywhere.

PDF
$14.95

MBZ Brake Systems Complete Repair Manual - PDF Download

Covers 1965-1995 Mercedes Benz Brake Component Replacement with 4-wheel disc brakes. DOES NOT COVER DRUM BRAKES.

This manual is a complete guide for all brake component replacement for all 1965-1995 Mercedes Benz cars. It will help you identify common signs of trouble, inspecting brake components, and replacing major brake components - a necessity for any DIY brake job on your Mercedes Benz!

$144.50

R107 380SL and W126 300SD ZIMMERMAN FRONT Brake Rotors - Set of Two

Made in Germany. Unbelievable quality and superb rust prevention coating.

These are simply the best for your old Benz. They fit all W126 300SD and R107 380SL from 1981 to 1985. They also will fit the W126 380SE, 380SEL, and 500SEL from 1981 to 1985. Very heavy to ship. Watch the video below to see why these are Kent's favorites.

$57.50

BREMBO 1977 TO 1991 Select Models Premium Ceramic Front Brake Pads - Full Set of 4 Pads

Kent's favorite pads: Fits 1977 to 1985 W123, all 1979 to 1985 R107, and all 1981 to 1991 W126 models (both coupes and sedans). If you are not sure of your model application please email BEFORE ordering.

You want superior stopping performance as well as minimum brake dust on your wheels - then these pads are what you want. Watch the video below - they are also really pretty!  :-)

On Demand Video
$19.99

Using Our Pressure Brake Bleeder and Capture Tank - On Demand Video

Kent walks you through a full brake fluid flush on a W126 Mercedes showing all the tips and tricks to do it right yourself.

This is a full 25-minute step-by-step instructional video on how to properly flush or bleed your brake system using our pressure brake bleeder and fluid capture tank.

On Demand Video
$15.99

Emergency / Parking Brake Shoe Installation w/ Ease - On Demand Video

Requires Kent's special tool to take the pain out of this job! These are the instructions only.

Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.

On Demand Video
$29.99

Removing Rusty Bolts, Nuts and Fittings with Kent's Rust Buster Tool - On Demand Video

You can not believe how well this works - Let high speed vibration do the work - Save knuckles, frustration and money!

This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:

$38.75

3 in I Emergency Brake Install Tool w/ Extras Including Video Instructions

Tool handle revision 8/5/23: This is a must-have tool if you are replacing emergency / parking brake shoes!

One day Kent "finally had it!" Replacing parking brake shoes was always a dreaded job. As he thought about it he realized the frustration was mostly due to the hassle of getting all the holding springs on and off. So he set out to develop a new tool.

$29.75

Front Brake Pad Sensor Wire Removal and Replacement Tool

Works on the Following: All 107,116,123 and 126 Chassis from 1973-1991.

Have you ever tried to get those old stuck pad sensors off your front calipers? Have you had much success doing it without damaging at least one wire? Kent has had the same frustration over the years so finally designed a custom tool for the job.

On Demand Video
$8.99

Brake Pad and Caliper Service Instructions - On Demand Video

Kent demonstrates his recommended 2 year brake pad and caliper inspection and service procedures - applies also when installing new brake pads!

These are the instructions that come with Kent's brake pad and brake caliper service kit. It is possible to make your own service kit by watching this video. To purchase the kit see related products below. To learn more about the importance of this kit watch the video below:

$32.75

Brake Pad and Brake Caliper Service Kit - For Long Pad and Rotor Life

You MUST exercise those caliper pistons and lube those pads! Use when changing pads or at your regular every 2 year brake system service

Brakes are one of the most often neglected maintenance items on older cars. This is not just related to Mercedes Benz. Most owners don’t realize that brakes need special attention and service not only when pads are changed but every 2 years.

PDF
$9.75

Brake Bleeding Equipment and Procedures by Kent Bergsma - Download

Applies to all models and chassis listed below:

This 12 page instructional downloadable booklet by Kent Bergsma covers brake bleeding equipment and procedures for all model Mercedes from the mid 1950s to the mid 1990s. This covers chassis Ponton 110 111 112 113 108 109 114 115 116 107 116 123 126 201 and 124.

PDF
$3.95

Flexible Brake Hose Replacement Instructions by Kent Bergsma - Download

Applicable to almost all models from the late 1960's to the mid 1990's

5 page digital PDF Instructions include multiple pictures to assist you in completing the job. Clear and detailed with tips and tricks from Kent Bergsma's years of experience. 

We also highly recomend the Ultimate Flexible Brake Hose tool to complete the job. Look below to view.

PDF
$9.95

Emergency Brake Repair and Adjustment Manual by Kent Bergsma - Download

ALL Mercedes CHASSIS 111 113 108 109 114 115 107 116 123 126 201 124 129 140 from 1968 to 1995

Older Mercedes have a very effective emergency brake design which was virtually the same on all models from the late 1960s right up through the early 1990s. The actuating mechanisms are all mechanical and are controlled by a Y cable under the car.

$16.50

Brake Lubricant

Stop Pad Squeal

Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products.

$17.95

Pentosin DOT4 Brake Fluid - One Liter

Higher Performance Fluid - direct replacement for DOT 3 - All Models

WARNING: Can only ship inside the USA via UPS GROUND. If you have other items in your cart do not choose expedited shipping or US postal service! High Performance low moisture absorbing DOT brake fluid.

$72.15

115 116 107 123 126 Chassis Rear End Wheel Bearing Kit

Inner and Outer Bearing and Seals for ONE SIDE ONLY (Right or Left)

This complete kit ncludes both inner and outer rear end wheel bearings and seals with groove nut and grease. Fits chassis listing above including the 123 300TD wagon, from 1974 to 1991. If you need bearings for both sides order 2 of these kits.

Most Models 1965 to 1991 Front Brake Disc Mounting Bolt
$4.75

Most Models 1965 to 1991 Front Brake Disc Mounting Bolt

Fits 111 113 108 107 114 115 116 123 126 Chassis

When replacing front brake discs on above chassis it is highly recommend you replace the bolts that hold the rotor to the bearing hub. Not needed on 201 124 or 129 chassis. Sold individually. 5 required per wheel.

$24.50

Flexible Brake Hose Installation Kit 1968 to 1991

Includes 9x11 mm flare nut brake line wrench, thread sealant and PDF instructions

Fits 107 115 116 123 and 126 Chassis. This "must have" kit will help you replace the rubber flexible brake hoses on your older Mercedes from the late 60s up through the late 80s.

$4.75

All Models Brake Master Cylinder Reservoir Protective cap

Prevents leaks when pressure bleeding brakes

This small rubber cap protects dirt from entering your level indicator on your brake fluid reservoir. Fits 107 114 115 116 123 126 201 and 124 models from the early 70s to mid 1990s.

$95.25

116 123 126 Chassis Front Wheel Bearing Replacement Kit - All Models

ALL parts shown for BOTH wheels! 450SE 450SEL 300SD 240D 300D 300TD 300CD 280E 280CE 380SE 380SEL to 1985

If you need everything for your front hub, then this is the best deal. This kit is for BOTH sides. Comes with inner and outer wheel bearings, seal, cap, ground clip, and a tube of FREE HIGH PERFORMANCE synthetic wheel bearing grease.

123 126 Rear Brake hose set
$32.50

EARLY 107 116 123 126 Chassis Meyle Rear Brake Hose Set

CURRENTLY SHIPPING FEBI BRAND

Here is a brand new set of Rear brake hoses for all 123 chassis 1977-1985 and 126 chassis 1981-1991, both gasoline and diesel models and 116 Chassis 300SD only, and 1973 to 1980 450SL.  Also fits 380SL from 1981 to 1985 -- US MODELS ONLY

123 126 Front Brake hose set
$36.00

Late 123 All 126 Chassis Meyle Front Brake hose set

CURRENTLY SHIPPING CORTECO --- VAICO -- CENTRIC HOSES

Here is a brand new set of Front brake hoses that fit all 123 chassis from 1981-1985 and 126 chassis from 1981-1991, both gasoline and diesel models.

_______________________________________________________________________________

Front grease cap ground clip
$9.50

Factory OE Front Brake Grease Cap Contact Spring Set (2)

Fits all models from the late 1960s up to the early 1990s that use a contact grounding spring inside the front hub bearing grease caps. Sold as a set of two (2). This important copper spring provides a clean contact to ground for the brake pad sensor wire.

Pages