Search | W114 | Fuel Delivery

Displaying 1 - 20 of 20
On Demand Video
Mercedes Short Fuel Pump Instructions - On Demand Video
$19.99

1963 to 1973 Short MFI Electrical Fuel Pump Lower Section Resealing Instructions - On Demand Video

Be sure your Mercedes has the "short" style fuel pump. Not all models in those years had one (see description)

MFI (mechanical fuel injection) fuel pumps are notorious for leaking fuel. Leaks are almost always due to age hardened and deformed o-rings inside the pump. Taking the pump off the car, taking it apart, cleaning it and installing new seals will almost always solve the fuel leak problems.

$8.95

1960'S Through Mid 1970's Fuel Tank Filter Screen Removal Tool

For W110 W111 W112 W113 W108 W109 W114 and W115 chassis as well as W123 station wagon only

Most owners do not have a big enough hex wrench to remove the fuel tank screen on those models that had the fuel tank right under the rear trunk floor. But the screen does need to be removed, inspected and cleaned due to the age of these cars.

$43.95

116 123 126 Chassis Fuel Tank Outlet Screen Removal Socket

WORKS ON FUEL TANK SENDING UNITS TOO! Machined short for easier access and a sharper edge for better grip.

FITS all 116 123 Diesel and Gasoline,  and 126 chassis from 1977 to 1985. Finally a socket to remove your fuel tank screen that really works. Most correct size sockets tend to be SO BIG that they require 3/4 inch drive ratchets and extensions to use them. Who has those in their tool box??

$16.80

5/16" or 8 mm Fuel Hose Smooth Clamp Set of 16

Rounded edges keep from cutting hose. Best clamp to use for high pressure ( ie. D-Jetronic or other fuel injection )

Excellent quality zinc plated hose clamps as shown. These can be tighten with a straight blade screw driver or a 7mm socket or nut driver. 

On Demand Video
$9.99

1970 to 1975 D-Jetronic Fuel Pressure Regulators: How They Work / How to Test - On Demand Video

There is a little mystery around these. I will open them up and show you how they work and what they really do.

People call these two units pressure regulators, but really only one of them is. In this xx minute video, Kent will explain how these are different, what each one does, how to adjust them, and how to test them with a hand pump vacuum tester. 

$18.75

1970 to 1976 D-Jetronic Fuel System Depressurization Kit

Forget fuel pump relay, forget fuel pump fuse, forget getting under back of the car to disconnect the fuel pump. No engine cranking. No flooding cylinders with fuel. Easy 5-minute process with no spillage

This kit will put a smile on your face, especially if you have done it before the "old way." Watch the video below for full instructions on how to use this kit to do the fastest fuel system depressurization in the world!

$8.90

Fuel Hose Special External Coil Wire to Prevent Kinking and Chaffing

Can be cut to 4 to 5 smaller lengths and stretched for various applications on 7mm, 7.5mm and some 8mm internal diameter fuel hose.

This can do amazing things for your new fuel hose installaton on your old Benz engine. Watch the video to learn more. Sold individually in approximately 6 inch lengths.

On Demand Video
$16.99

1970 to 1975 D-Jetronic Fuel Injection Repair / Service Instructions - On Demand Video

A commonly neglected service that can lead to poor running and possible engine fire. It is the rubber parts that fail! See video below to believe it!

In this 36-minute instructional video, Kent will walk you through the process of doing a complete fuel hose replacement and fuel injector service on a 1970 to 1975 Mercedes V8 engine with Bosch EFI electronic fuel injection.

$79.95

Bosch D-Jectronic Fuel Injector Testing and Cleaning PARTIAL Kit

For 1970 to 1975, electronic fuel injectors. A pressure tank is required. See notes below. Full kit is available if desired.

With the required pressure tank you will be able to individually test and clean our D-jet fuel injectors. Along with a 12-volt power source, you will need I gallon of cleaning fluid as described in the instructions.

$5.80

8mm ( 5/16 inch ) Fuel Hose End Pugs x 4

Use when disconnecting a fuel hose to prevent spillage on your engine or floor!

You would be amazed at how much fuel can leak out of a fuel hose when you disconnect it from your tank or engine. This is an easy way to prevent messy spills.

On Demand Video
$8.99

Fuel Tank Level Sending Unit Service Kit Update - On Demand Video

For using Kent's service kit to clean the old style fuel tank sending unit. Used in congestion with original video instructions

This on-demand instructional video was filmed to go with Kent's new fuel tank sending unit service kit launched in June of 2020. This is not a complete video on the subject of fuel level sending units. For the complete video see related products below.

24.50
$26.00

Fuel Tank Level Sending Unit Service Kit w/ 2 Instructional Videos

Most models 1968 to 1995 with tubular sending unit inside the fuel tank.

If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.

$19.85

Bosch D-JETRONIC Fuel Pump Outer Reseal Kit

For original fuel pumps on many 1969 to 1975 D-jet fuel injected cars ( Mercedes, Porsche, Alfa Romeo, Etc.) - Study the picture below carefully to make sure you have a match!

Kent has sourced 2 special Viton o-rings for the outer pump housing on these early djetronic Bosch electric fuel pumps. There are two orings that harden with age causing the pump to leak fuel at the outer end of the pump.

$19.50

Early Gas and Diesel Fuel Injection Pump Oil - High Moly Content

Most often these oil checks and changes are ignored. Injection pumps are very expensive. You need a very strong oil to minimize wear.

NOTE: Ships UPS ground only. Select ground for entire order to save in shipping costs. I am a great fan of LubroMoly products.

$66.95

Best Grabbing and Clamping Hand Tool Set in The World - Kent’s Collection

3 super custom tools that you will not find anywhere else in the world. All designed by Kent Bergsma

This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes.  He makes each one of these tools right here in his shop.

$22.75

Fluid Maintenance - Radiator and Fuel Hose HD Pinch off Pliers

A must when changing rear mount fuel filters and pumps. Best tool for secure clamp-off in tight locations. Works on fuel hose, coolant hose and even big radiator hose.

I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places.  Many do not stop every last drip from coming out of the hose.

$14.95

Gas and Diesel Fuel Hose Clamp Off Tools

Ouality Lisle brand. Sold in pack of two.

Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!