Search | W115 | On Demand Video

Door hinge lubrication has to be one of the most neglected maintenance items on the older models. I think part of the problem stems from the fact owners don't know how to do it or don't know how to acquire the proper grease gun to lubricate those special fittings on the door hinges.

In this short 2:32 minute video Kent will show you how he first tests the sunroof drains for blockage and then how he goes about cleaning out any blockage.

Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire. 

Kent will walk you step-by-step through the process of cleaning and prepping the old caliper for the new seals. He will share his recommendations on painting as well as how to retard the rust inside the caliper housing.

On older Mercedes spot rust can be a hidden problem under side moulding trim, under fenders and rocker panels and inside the bottom edges of doors.

Installing new front rotors on older model Mercedes requires that you remove the rotor from the bearing hub and bolt the new rotor back on. Sounds easy right? Sometimes not! The bolts are on very tight and often take a lot of torque to remove. How do you hold the break rotor while doing this?

Kent uses his 1976 240D that had sat idle for 6 years to demonstrate what needs to be done to get an old fuel system cleaned out and serviced properly. This always includes installing new fuel filters and sometimes will require replacing some of the rubber hoses.

The side trim strips beginning with the W108 Chassis in 1965 and ending with the 123 chassis in 1985 were all held to the body with the same method.

If both dash lights are not working including the lights in the upper center console the problem is most likely in the dimmer switch located on the back of the instrument cluster. This is also call the potentiometer providing variable resistance in the wiring to the bulbs.

Tired of lugging around heavy batteries or battery boosters to test electrical components in your car? It does not have to be a Mercedes. It does not even have to be a car. Anything that runs off 12 volt DC power can be tested by these small, light weight but very powerful batteries.

Is your driver side or right side manual adjusting mirror getting difficult to adjust? Is the mechanism broken or will not hold adjustment? Does the mirror glass need replacing? Repairing these types of problems is definitely something you can do yourself!

Rough running diesels abound everywhere. The symptoms include poor acceleration, no power, and excess exhaust smoke. Some times these can be a sign of real problems. Other times it may mean your fuel injection system just needs a good cleaning. And NOTHING cleans better than Diesel Purge.

Does your rear end make funny noises while driving? Does the rear of your car sag in the back? Do you have excessive rear tire wear? Does the rear of your car feel like it is moving around? During heavy braking or rapid acceleration does your Mercedes want to steer right or left on its own!

An annoying problem on many older Mercedes up to 1980 that have an aluminum housing surrounding the turn signal arm latching assembly. When these wear out the lever will not hold position when you push it up or down.

Understanding how an inside rear view mirror is mounted is essential for proper removal and replacement. The mirror can be easily damaged if you do not know the tricks to getting it snapped back into the mounting bracket in the head liner.

Groaning, snaping and jammed door check straps are a common problem on the older models (up through 1995). This is primarily due to age and lack of lubrication. Newer models will soon start having similar problems. Rain water getting inside the doors is the big killer.

To many people, automotive electrical systems and testing are a big mystery. It is not as complicated as you might think.

In this 10 minute video class Kent shows you what you should initially look for when checking out an older Mercedes for sale. He routinely does a quick 3 to 5 minute walk around to determine if the car passes his priority three part test. 

Those three areas on inspection are:

In this video Kent shares his secrets on how to make the inside of an old Benz look like new again. Now granted, you must have a reasonably good car to start with.  He is not going to show you how to reupholster, change seats and door panels, etc.

Kent walks you through replacing a trunk seal on a 1970 280SL. The video is 13 minutes long and covers removing the old seal, cleaning the groove, trial fitting the new seal, and the final gluing procedure.

In this 9-minute instructional video, Kent explains how to set up his injection pump cleaning and testing kit ( available separately ), and use it to clean out old fuel injection pumps of gum and grime, and then how to test them to make sure they are delivery fuel through every line. 

In this 30 minute instructional video Kent will use a 1972 300SEL 4.5 to show you how to remove the master cylinder with minimal spillage, how to install the tank and bench bleed a new master cylinder, and how to reinstall it with minimal brake fluid spillage while protecting your car's paint. 

In this 13 minute instructional video Kent will show you how to clean your sunroof cable tube, prep your cable for easy installation, lube the cable during installation, show preliminary clutch adjustement, and demonstrate how to get cable to engage the drive assembly using the power switch.

The sunroof transmission drive unit moves the cable back and forth to open and close the sunroof. There are 5 gears inside this unit that transfer the incoming drive from the motor ( high speed) to the final drive moving the cable (slow speed).