In this 14-minute video instruction, you will get to see how Kent cleans and details an engine compartment in a W210 E430 using his favorite chemicals and techniques. This includes using less than a gallon of water and controlling the spray rinse so you protect sensitive electrical components.
Search | W108 W109
This kit contains the following matched fittings. Two brass connector fittings and two hose clamps are included to help you fix old leaking air hoses. One is for 5/16 inch hose and the other brass fitting is for 3/8 inch air hose.
One of the handiest wrenches you can own! This double reversing ratcheting S wrench can save the day! Works great for 17 mm nuts like on bumpers and alternator brackets and the 15 mm can work on some hard to get to flex disk bolts.
Over the years Kent has detailed hundreds of cars and you know from his videos that he likes "extreme" detailing. His absolute favorite two "tools of the trade" are these premium grade microfiber sponges and what he calls his soft bristle "sawed off" paint brushes.
Door hinge lubrication has to be one of the most neglected maintenance items on the older models. I think part of the problem stems from the fact owners don't know how to do it or don't know how to acquire the proper grease gun to lubricate those special fittings on the door hinges.
If you own and maintain an older car (especially 15 years and older) you must be willing to take care of its lubrication needs or you may spend big money later in repairs.
Ever wish you could find a good way to lube the door hinges on your old Benz? Maybe you have seen that little fitting wondering what it is, or maybe you have heard there is a special grease gun that can inject grease into that fitting?
Over the years Kent has used a number of different things to place on top his jack stands to prevent damage and for added security. He has even tried some of the commercially available jack stand plastic covers. Nothing has proven to work better than the special cut reinforced hose shown here.
This is the best one Kent has ever used and he has tried quiet a few kneeling "aids". With 6 wheels this one is strong enough not to break in the middle. In indents with the knee foam are very comfortable.
Purchase together and save $$$$. Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?
Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)? How about those fine scratches in your side windows caused by dirt in the scrapers with rolling the windows up and down.
This video will take you step by step through the process of using our glass polish kit with a multitool to remove those fine scratches from your windshield or rear hatch glass. It also works great for polishing the water and acid rain out of any glass, including shower doors!
When cleaning and cosmetically restoring your cars engine and engine compartment, you will need containers for the various cleaners, acids, paints and sealants you might use as well as brushes to apply them.
Kent has been working a long time to find a way to stop the ugly corrosion on aluminum and magnesium engine parts. Particularly valve covers and intake manifolds. Help Kent out here to test this new product he has been using. The kit includes a 1 oz container of gel and a scotch brite pad.
In this short video Kent will show you how he first tests the sunroof drains for blockage and then how he goes about cleaning out any blockage.
When prepping many surfaces on your engine for replacement gaskets or application of RTV sealant it is very important not to scratch the metal. In some cases that can set up corrosion or possible small leaks that will lead to premature failure of the repair.
Kent uses these superb plastic razor blades regularly in his shop. Recently they proved very useful when resealing the magnesium engine breather covers on an M113 engine. There are seven green and three orange in this little package.
How can you tell if you have a hole or leak in your exhaust system? What are the symptoms? Can the leak be patched? When will you have to get either a new center muffler or rear muffler or pipes or all three? Can you replace the mufflers yourself and what are the tricks?
This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!
This is the Permatex Brand Extreme Brake Parts Lubricant. 100 percent synthetic formula with ceramic solids. It resists moisture and corrosion and will not wash out. Lasts longer than any other caliper grease. Silences brake noise across a much wider temperature range.
Old cars and brake issues go hand in hand. Especially if the car is not driving very often. Brake problems usually first show up as “dragging” or sticking brakes. If this issue is not dealt with immediately it can lead to serious problem including the car catching on fire.
Worried about the internal condition of the fuel tank on your old 1959 to 1972 mechanical fuel injected Mercedes? Not sure if it has rust or other contaminants inside it.
MFI (mechanical fuel injection) fuel pumps are notorious for leaking fuel. Leaks are almost always due to age hardened and deformed o-rings inside the pump. Taking the pump off the car, taking it apart, cleaning it and installing new seals will almost always solve the fuel leak problems.
Kent has never seen fresh fuel hoses on all the old MFI Mercedes he has worked on over the years. They only seem to get changed when they start leaking. Leaking fuel hoses at the electric fuel pump is a fire hazard!
Most owners do not have a big enough hex wrench to remove the fuel tank screen on those models that had the fuel tank right under the rear trunk floor. But the screen does need to be removed, inspected and cleaned due to the age of these cars.
Have you ever tried to mask off your tires with paper and tape before painting the wheels? If you have I am sure you are laughing right now. Doesn't work too hot...Hard to get any tape to stick to the rubber tire.
If you drive hard and do a lot of heavy breaking your front wheel bearings should be packed with this grease! This is Kent's favorite. Also good for chassis, suspension, cv, and universal joints.
Would you like to find out how well your old (1959 to 1972) mechancial gasoline fuel injectors are working? Now you can do it yourself at home with our custom bench mount hand pump pressure tester and cleaning kit. These are the full instructions that come FREE with the kit.
Kent will walk you step-by-step through the process of cleaning and prepping the old caliper for the new seals. He will share his recommendations on painting as well as how to retard the rust inside the caliper housing.
In this video manual Kent will walk you step-by-step through the process of properly putting the caliper back together again with the new seals and correct assembly paste.
On older Mercedes spot rust can be a hidden problem under side moulding trim, under fenders and rocker panels and inside the bottom edges of doors.
Kent believes this is the best protection you can give your rear end. Since there is no filter there for the fluid, nothing other than this super strong magnetic drain plug can keep metal particles from working their way back up into the bearings and gears.
Sold in a set of four. These have to be the strongest magnets in the World! You do not put them inside the pan. Rather you spread them out on the outside bottom of the transmission pan as shown in the picture below. Talk about an easy install! You don't even need to jack the car up!
This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.
This green colored grease is specially formulated to work on any Mercedes from wheel bearing. Comes in a tube that is enough to do two front wheel bearings and inside hubs. If you drive at high speeds this is your best grease to prevent bearings from overheating.
You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.
Installing new front rotors on older model Mercedes requires that you remove the rotor from the bearing hub and bolt the new rotor back on. Sounds easy right? Sometimes not! The bolts are on very tight and often take a lot of torque to remove. How do you hold the break rotor while doing this?
Transmission service on these older Mercedes is very often neglected and it is something you can do yourself. It should be done every 30,000 miles or every 5 years (whichever comes first). After you watch this video you will find out why you should do it yourself!
FITS THE FOLLOWING: all W107, W108, 109, W111, W113, W114, W115, W116, W123 and W126 chassis from 1969 to 1991. See models listed below. NOTE: Four pads included for both sides of rear axle. Tired of excess brake dust and poor performance during heavy braking? These are amazing brake pads.
If you are experiencing excessive steering play you might want to inspect your coupler. This new part comes with thread locker bolts and locking washers as shown.
Mercedes 108, 109, 114, 115, 116, 107, 123, 126, 124 and 201 chassis window trim has a super strong anodized coating that is imperious to hand polishing but still can oxidize when exposed to harsh environmental elements.
When working on automotive engines a long heavy machinist straight edge is a must. This is the best way to tell if the mating surfaces are flat and true. That includes cylinder heads, engine blocks, intake and exhaust manifolds as well as critical sealing metal to metal covers and housings.
A 12 volt test light is a very handy tool to have when working on any car but it is particularly important if you have a old diesel. This tool will allow you to quickly determine if there is power getting to your glow plugs, and if not where the power is breaking down.
Tired of lugging around heavy batteries or battery boosters to test electrical components in your car? It does not have to be a Mercedes. It does not even have to be a car. Anything that runs off 12 volt DC power can be tested by these small, light weight but very powerful batteries.
Here is a chance to deck out your Benz this Holiday Season, or give as a gift to the Mercedes fan! How awesome is this for some real Christmas decor! Kent found these and just had to have them to offer to our customers for the holiday season. Available here in Green.
Here is a chance to deck out your Benz this Holiday Season, or give as a gift to the Mercedes fan! How awesome is this for some real Christmas decor! Kent found these and just had to have them to offer to our customers for the holiday season. Available here in Silver.