Search | Injector tester
Diesel Fuel Injector Balance Pressure Tester - Yes, You Can Do It Yourself!
For all MBZ diesel engines 1950 to 1999. Designed by Kent Bergsma. These are built at Mercedessource to control quality and production demands. Each one is tested here in our shop before shipping.
CIS Gas Fuel Injector Spray Pattern Tester and Nozzle Cleaner
Works on all models from 1977 to 1993 with the Bosch C.I.S Fuel Injection system - see models listed below: Now you can do it yourself on the bench with this inexpensive tester- Save big $$. Ever wonder how well your old CIS fuel injectors are working?
MFI Fuel Injector Tester: Assembly, Testing and Cleaning Operations - On demand Video
Would you like to find out how well your old (1959 to 1972) mechancial gasoline fuel injectors are working? Now you can do it yourself at home with our custom bench mount hand pump pressure tester and cleaning kit. These are the full instructions that come FREE with the kit.
DIESEL Conversion for Your Version 3 Gas Engine Fuel Injector Tester
If you acquire an older Mercedes diesel and want to test those large Bosch injectors with your V3 gasoline bench tester, you will need 4 things to complete the conversion: 3000 PSI gauge, our new capture bottle to hold the larger injectors, injector sealing kit, and Kent’s written manual and vid
All 61x and Some 60x Diesel Engine Compression Tester Kit With Test Guide
For use on all*** Mercedes diesels 1959 to 1993. BUT PLEASE NOTE THERE ARE SOME LIMITATIONS ON THE LATER MODELS. Test compression on 110, 115, 116, 123, 126, 201,124 AND 140 chassis. Almost ALL models up through 1987 can be tested through the fuel injector hole.
How to Install Our Injector Pressure Tester Conversion Kit
This video only applies to our injector pressure tester. Kent will show you how to attach the capture bottle and fittings to your older Version 1 or Version 2 pressure tester. Video is free with purchase of the conversion kit.
Super Thin 14mm Combination Wrench for CIS Pressure Tester Fittings
When pressure testing your KE-jetronic fuel injection, you may find you need a really thin wrench to install the small fitting on the right side bottom of the fuel distributor.
1970 to 1975 3.5 4.5 D-Jetronic Fuel Injection Pressure Tester w/Extras
6/6/23 Update: Now with a liquid filled pressure gauge installed to increase accuracy and reliability. We customize, test and recalibrate this fuel pressure tester before we ship it.
Version 3 Injector Pressure Tester Full Function and Setup - On Demand Video
This video is specifically for setting up and using Kent's newest version of his diesel fuel injector bench mount tester. It does not contain any information on the actual process of cleaning or rebuilding a fuel injector.
Diesel Compression Tester Replacement Sealing Washers
When doing a compression test you must properly seal the inner surface of the pre-chamber with the fuel injector hole adapter. Copper washers work the best for this to ensure a 100 percent seal. Do not use the engine's heat shield washers.
CIS Gas Fuel Injector Cleaning and Testing Conversion Add-On Kit
We know that many of you own multiple Mercedes, including both gas and diesel models. If you own one of Kent’s fuel injector pressure testers you no doubt will want to test all your applicable mechanical fuel injectors in both types of older engines.
Early MFI Mechanical Gas Fuel Injector Cleaning and Testing Conversion Add-On Kit
We know that many of you own multiple Mercedes, including both gas and diesel models. If you own one of Kent’s fuel injector pressure testers you no doubt will want to test all your applicable mechanical fuel injectors in both types of older engines.
Early Gas Engine Fuel Injector Back Flush Cleaning Instructions - On Demand Video
This 24 minute on demand training video comes with our injector back flush cleaning kit. You can purchase this video separately, but please keep in mind you will not have any of the tools or supplies to complete this procedure yourself.
Early Gas Engine Fuel Injector Back Flush Cleaning Kit
With these old gas fuel injectors, sometimes you just have to "back flush" the insides to restore them to peak performance. There is no guarantee that back flush cleaning will restore every old gasoline mechanical fuel injector. Some are just plain worn out.
CIS Gas Fuel Injector Tester Setup and Operation - On Demand Video
In this short video, Kent will give you an overview on setting up and using Version 3 of his bench mount CIS gasoline injector pressure tester.
MFI Tester Setup and Operation - On Demand Video
Introductory video
CIS Gas Fuel Injector Removal, Cleaning and Testing - On Demand Video Manual
If you think CIS fuel injectors can just be ignored, think again. Sure, your gas engine will continue to start and run “ok”, but you may find that it is not producing the power it once did nor the fuel mileage it once delivered.
6 Cyl 603 DIY Fuel Injector Rebuild Kit
For 1986 to 1993 with OM 603 6-cylinder 300D 300TD 300SD 300SDL 350SD and 350SDL. Also fits 1994-1995 S350. This kit includes Kent's new version 3 pressure tester. Watch the first video below to learn more about its key features.
5 Cyl 617 Diesel Engine Fuel Injector DIY Rebuild Kit
5/25/22 update: The precision nozzles included are now made for us by Wolfswerke-sachsen ( same company and same nozzle that was formerly branded as Monark). Yes!
4 Cyl 220D 240D 190D DIY Fuel Injector Rebuild Kit
5/25/22 update: The precision nozzles are now made for us by Wolfswerke-sachsen ( same company and same nozzle that was formerly branded as Monark). Yes!
Diesel and Early Gas Fuel Injector Line Nut Custom Removal Wrench
Works on the following: 6 cylinder gas MFI engines 1959 to 1972, 6.3 and diesel engines 200D 220D 240D 300D 300TD 300CD and 300SD through 1985.
1970 to 1975 D-Jetronic Fuel Injector New Wiring Plugs x 8
These WILL NOT work on your original injectors. They will ONLY work on our new replacements (see below) These plugs are a good alternatiive to the damaged originals on your D-Jetronic fuel injected engine IF you are installing our new injectors.
Diesel Fuel Injector Anti Leak Kit w/ Instructions
We receive a large number of emails from customers complaining about small fuel leaks at the fuel injector housing (coming out the threads between the two halves)and how best to seal them. To fix this high pressure leak requires taking the injector apart and "lapping" the mating surfaces.
Diesel Injector Cleaning, Overhaul and Testing Procedures Manual - by Kent Bergsma
Applies to all 110 115 116 123 126 201 124 140 diesels from 1961 to 1994. From my many years of working professionally on Mercedes diesels I have learned fuel injectors are the single most neglected maintenance item. I believe there are a number of reasons for this.
Bosch D-Jetronic Fuel Injector Testing and Cleaning FULL Kit
This will give you everything you will need ( except 12-volt power and cleaning fluid ) to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
Diesel Injector Cleaning, Overhaul and Testing Procedures Manual By Kent Bergsma - Download
33 page digital PDF manual. Applies to all 110 115 116 123 126 201 124 140 diesels from 1961 to 1994. From my many years of working professionally on Mercedes diesels I have learned fuel injectors are the single most neglected maintenance item. I believe there are a number of reasons for this.
1970 to 1973 3.5 350 D-Jetronic New Replacement Fuel Injector Set with Extras
WARNING: MAKE CERTAIN your current injectors are yellow at the top. A restocking fee will apply if you place an order in error. For the 3.5 engine ONLY. See related products below if you have a 4.5.
Bosch D-Jetronic Fuel Injector Service Kit
This is the most complete 1970 to 1975 V8 injector repair kit you can find anywhere.
Bosch D-Jectronic Fuel Injector Testing and Cleaning PARTIAL Kit
With the required pressure tank you will be able to individually test and clean our D-jet fuel injectors. Along with a 12-volt power source, you will need I gallon of cleaning fluid as described in the instructions.
Variable 26 Pc. Diesel Fuel Injector Pressure Adjustment Shim Kit
This is a "must-have" kit when adjusting release "pop" pressures on older diesel mechanical fuel injectors. It is the internal spring "shim" thickness that determines the exact pressure required for the release of fuel at the tip of the injector.
4 Cyl 615 616 601 Bosch Diesel Fuel Injector Nozzles w/ Heat Shields
Fits the following: All 4 cylinder diesel engines from 1968 to 1985, including 201 Chassis 190D 2.2. For 220D 240D and 190D 2.2 Engines - FREE heat shield washers - PDF download instructions included.
5 Cylinder 617 Bosch Diesel Fuel Injector Nozzles w/ Heat Shields
Fits the following: All 5 cylinder diesel engines from 1975 to 1985. For 300D 300TD 300CD 300SD, PDF instructions included. This is the critical inside wear part of the injector that delivers the fuel spray into the cylinder. These are direct replacement new fuel injector nozzles from Bosch.
Brake Caliper Rebuilding Part 1: How to Remove Frozen Pistons From Brake Calipers - On Demand Video
You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.
Late 1974 and 1975 450SL, 450SE and 450SEL New Fuel Injectors Less Bottom Seals
DO NOT ORDER UNTIL YOU REMOVE ONE INJECTOR IN YOUR ENGINE AND INSPECT THE HOLE. Sometime in 1974, Mercedes changed the way these injectors were sealed into the head to prevent air leaks. A "YELLOWISH" nylon sleeve was added along with two seals on the lower end of the fuel injector.
Frozen Brake Caliper Piston Removal Pump Adapter Hose
This is a must-have if you attempting a caliper rebuild on one with stuck pistons. If you own one of our injector pressure testers here is a great add-on that will allow you to use the tester to remove stuck pistons from old brake calipers.
Cleaning and Testing Bosch D-jetronic Fuel Injectors Under Pressure - On Demand Video
In this 24 minute instructional video Kent will explain the process of how to bench clean and test your D-jetronic fuel injectors in your own garage or workshop once they are removed from the engine.
1970 to 1976 D-Jetronic Fuel System Depressurization Kit
This kit will put a smile on your face, especially if you have done it before the "old way." Watch the video below for full instructions on how to use this kit to do the fastest fuel system depressurization in the world!
Purging a Diesel Engine Fuel Delivery System Step-by-Step - On Demand Video
Rough running diesels abound everywhere. The symptoms include poor acceleration, no power, and excess exhaust smoke. Some times these can be a sign of real problems. Other times it may mean your fuel injection system just needs a good cleaning. And NOTHING cleans better than Diesel Purge.
4 Cylinder 220D 240D Physical Exam Kit - Check Engine Health
If you are going to buy or have just purchased an older 4 cylinder Mercedes Diesel the first thing you need to do is a good physical exam of the engine. It is even better to do this BEFORE you purchase the car to prevent surprises and pain in your wallet.
How to Depressurize a D-Jetronic V8 Fuel Injection Rail - On Demand Video
In this 8-minute video, Kent will show you how to quickly depressurize your D-Jetronic fuel system before doing any injector service, replacing any hoses, or hooking up our fuel pressure tester.
5 Cylinder 617 300D 300TD 300SD Physical Exam Kit
If you are going to buy or have just purchased an older 5 cylinder Mercedes Diesel (1975 to 1985) the first thing you need to do is a good physical exam of the engine. Don't throw money at a car that has a dying engine.
MFI Short Fuel Pump Yellow Zinc Original Style Screws and Lock Washers
The original screws in these pumps get pretty nasty looking over time. When you try to clean them will a wire wheel the plating will be completely removed and the heads will rust again pretty quickly. Now you can install new original looking yellow zink plated screws and washers.
1963 to 1972 6 Cyl Fuel Injected Engine Oil, Oil Filter, and Fuel Filter Service - On Demand Video
In this 21 minute instructional video Kent will show you all his tips and tricks he used when doing an oil and filter change and a fuel filter change in his 280SL with the early 6 cylinder fuel injected engine.
1963 to 1973 Short MFI Electrical Fuel Pump UPPER SECTION Resealing Instructions - On Demand Video
This 28 minute on demand video manual will take you through the step-by-step procedure for taking the upper (motor section) of a short MFI fuel pump apart and replacing three o-rings that are prone to hardening and leaking fuel.
How to Do a Compression Test on Your Gas Engine - On Demand Video
In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.
W111 W113 W108 Fuel Injected 6-Cylinder Engine Fluid Filter Kit
These are high quality German brand filters. Since mose of these cars are not driven regularly Kent recommends an oil change every 5000 miles or 2 years whichever comes first ( using quality oil) and a fuel fitler change every 10,000 miles or 2 years whichever comes
Early Fuel Injection LONG and SHORT Electric Fuel Pump Seizure and Bottom Leak Service Kit
This kit will not fix all your pump problems. If the motor is worn or burnt out, this won't help. But if the lower impeller is "stuck" due to lack of use and old fuel, then this could be a simple fix. In the video below, Kent will explain what this kit can fix and why it is needed.
1972 to 1975 R107 350SL 450SL Complete Fuel Pump Conversion Kit
Since new original style pumps are no longer made, this is the best way to finally fix your old fuel pump leaks and poor performance.
Brake Caliper Rebuilding Part 2: Cleaning, Painting and Prep - On Demand Video
Kent will walk you step-by-step through the process of cleaning and prepping the old caliper for the new seals. He will share his recommendations on painting as well as how to retard the rust inside the caliper housing.