Search | tool

Displaying 51 - 100 of 432
$84.50

DELUXE Windshield Fine Scratch Removal and Glass Deluxe Polishing Kit w/ Power Tool

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - including a high speed power multitool to remove very fine scratches. Purchase together and save $$$$. Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

$42.50

Snap Cap Style Ignition Tumbler Service and Replacement Deluxe Tool Kit w/ Extras

Service or replace your ignition tumbler sitting in your car with Kent's custom tools and FREE detailed video

If you have been around old Mercedes for any length of time, you have probably run into a problem with your ignition key starting to "stick" or one that does not turn.  This problem can leave you stranded and could cost hundreds of dollars to fix $$$.

$16.95

Modified 14mm Long Handle Rear Drain Plug Removal Tool

WORKS ONLY WITH ORIGINAL OE DRAIN PLUG -- check your size needed BEFORE ordering if you have a Mercedes not listed below

Works on W114, W115, R107, W116, W123 and W126. A better performing and more comfortable 14mm hex wrench to use when changing the fluid in your rear end. Will work on manual transmission with 14mm drain plug only. Watch the video to see why.

$18.95

Gas and Diesel Engine Timing Chain Guide Rail Pin Removal Tool

For 3.5 4.5 380 420 560 V8s - 220D 240D 300D 300CD 300TD 300SD

Almost all Mercedes gas and diesel engines from the late 50's up to the early '90s used pressed in steel pins to hold the timing chain guide rails in position (inside the engine block).

$19.95

W123 Oil Pressure Gauge Actuator Replacement Instructions w/ Special Tool

Works on all 123 chassis 1977 to 1985 - common source of oil leak under dash

Oil leaks at the oil pressure gauge are becoming an increasing problem, particularly on the 1981 to 1985 turbo diesel models. You will discover it when you see wetness at the bottom lip of your instrument cluster or you find oil leaking on your feet or legs.

On Demand Video
Code Reader On Demand Video
$13.99

How to Use a Scan Tool to Read Check Engine (Light) Codes - On Demand Video

This is way easier than you might think and learning how could save you thousands $$$

Enter the dreaded “check engine” light. When it suddenly comes on it can create fear and panic in many a driver. Kent has known some people who have sold their cars cheap because they just did not want to deal with taking the car into a mechanic to get it fixed.

$28.75

"Rust Buster" Attachment Kit with Extras Including Video Instructions

You will have to supply your own multifunction tool similar to the ones we sell in our aluminum and glass polish kits ( see list below)

If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.

$29.50

Custom Made Large Angled Head Clamping Tool

Multiple uses for hose removal, assembly, and holding parts safely for cleaning and polishing.

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

$28.25

W123 Special Side Window Bottom Trim Removal Tool Set

This is the only way to remove this anodized trim without bending it.

This can be one of the hardest trim pieces to remove if you don't want to damage the car's paint or the aluminum trim itself. When working on detailing his 300TD wagon, Kent finally decided it was time to make a special tool for this operation.

On Demand Video
$29.99

Removing Rusty Bolts, Nuts and Fittings with Kent's Rust Buster Tool - On Demand Video

You can not believe how well this works - Let high speed vibration do the work - Save knuckles, frustration and money!

This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:

$7.80

M116 M117 Damaged Cylinder Head Bolt Removal Tool

Can remove 1970 to 1990 V8 R107 W116 and W128 head bolts where the hex hole has been rounded out.

Planning to replace the head gaskets on your older v8 engine. You should have this tool on hand before you start. You don't think so? Watch the video and then decide.

Sale
$3.35

W201 W124 R129 Front Strut Holding Tool

Quality U.S. made 3/8 inch drive 7mm ball socket hex wrench

This will hold the top of the strut and keep it from turning when removing and installing the 22mm nut.

$24.50

Heavy Duty 11 Piece Trim Removal Tool Set w/ Storage Pouch

Made of nylon instead of ABS or plastic. Very tough. Best Assortment Available.

This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...

$3.90

Emergency W123 and Early W126 Diesel Motor Mount Bolt Removal Tool

If you "round out" the hex hole in the main engine mount bolt this is the easiest and fastest way to get the damaged bolt out.

You must drive this star bit into the head of the damaged bolt with a hammer, but it will hold. The bolt will then need to be replaced. Watch the video below as Kent will explain how it works.

For mount kits and hardware, see related products below.

$4.99

M163 ML 320 430 500 Easy Hood Strut Adjustment Tool Set w/ Video Instructions

Easy way to get your ML hood in the upright position for engine maintenance

This simple tool set will save you much frustration and possible damage to yourself or to your ML hood. These tools allow you to remove the hood struts easily without damaging the spring clip or ball socket. Also works on many other hood and tail gate struts (like the Suburban).

$6.95

O-ring Removal Fine Point Pick Tool Set

Best set Kent has found to remove orings in hard to get to locations

This set of 5 pick tools have very thin and sharp points. Best set Kent has found to remove orings in hard to get to locations. The variety of angles available allows you to get into almost anywhere to remove and o-ring, sealing ring or other small part.

$14.95

115 116 123 126 201 124 Diesel HEAVY DUTY Rubber Exhaust Hangers x 4

NEW DESIGN - Best exhaust hangers for rattle prevention - and they stay on!

Fits all DIESEL ENGINE exhaust systems for 115, 116, 123, 126, 124 and 201 chassis from 1968 to 1995. If you are looking for a more robust exhaust hanger this is it! It is a stronger and more secure exhaust hanger than the standard round rubber type.

Rubber Exhause Hanger Set Soft Type
$8.25

Rubber Exhaust Hanger Set Soft Type set of (4)

Here is a brand new set of four exhaust "donuts". Check your existing rubber hangers on your exhaust. If they are cracked replace them before you lose your mufflers! If your exhaust is rattling, these should fix the problem. Fits all chassis models 108 107 113 116 123 126.

$44.00

M130 M180 Special Valve Adjustment 17mm Socket Wrench

Adjusts valves on Early 4 and 6 Cylinder Gas Overhead Single Camshaft Engines - Check the nut size of your adjusters BEFORE ORDERING - 17mm. DOES NOT work on 350 and 450 V8 engines.

We have been looking for a long time to find a super strong and well made tool to adjust those tough 17 mm ball adjuster sockets on the early 4 and 6 clyinder gas engines.

$22.75

Fluid Maintenance - Radiator and Fuel Hose HD Pinch off Pliers

A must when changing rear mount fuel filters and pumps. Best tool for secure clamp-off in tight locations. Works on fuel hose, coolant hose and even big radiator hose.

I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places.  Many do not stop every last drip from coming out of the hose.

On Demand Video
$6.99

1961 to 1985 Diesel Engine Pre-chamber Removal - ON DEMAND VIDEO

The correct special tools are required to do this job without damage.

In this 14 minute instructional video, Kent will share with you the tools you will need along with some tips and tricks that will help you successfully remove a prechamber from the cylinder head. This can be done with the head on or off the engine.

$78.50

617 Turbo Diesel Engine Prechamber (USED)

Fits 1978 to 1985 5 cylinder TURBO diesel engines only. 300D 300TD 300CD 300SD. Small internal hole design.

Excellent used pre chamber as shown for OM 617 turbo diesel engines ONLY.  If your diesel engine is running rough with excessive smoke and you have tried everything else it could be your engine's pre-chambers are damaged.

$89.95

1998 to 2006 V6 M112 O.E. Spark Plug Replacement Kit w/ Full Video Instructions

SPECIAL TOOL NOT INCLUDED but highly recommended if you don't have one. (purchase separately below ). With this deluxe kit you can reduce frustration and save big when doing it yourself. Watch the videos below to learn more!

I figured out why the spark plugs in these V6 engines don't seem to ever get changed.

$116.00

1998 to 2006 V8 M113 O.E. Spark Plug Replacement Kit w/ Full Video Instructions

SPECIAL TOOL NOT INCLUDED but highly recommended if you don't have one. (purchase separately below ). NOT for AMG models. With this deluxe kit, you can reduce frustration and save big when doing it yourself. Watch the videos below to learn more!

I figured out why the spark plugs in these V8 engines don't seem to ever get changed.

$169.95

Kent's Super Multi-Tool Auto Detail and Repair COMBO Kit

So you thought the multi function tool was only for woodworking. Kent has adapted it for automotive use and it rocks!

Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.

$7.85

19mm USA Locking Capable Crowfoot Wrench

WARNING: This will NOT WORK ON THE BOSCH BRAND PRIMER PUMP!!!!

This is the best tool to use when installing or removing the Monark hand primer pump. PLEASE NOTE. This is 19mm and will NOT work on the Bosch hand primer pump or other style pumps (most others are 17 mm).

$36.50

16 Inch Long Reach 1/4 Inch Swivel Head Ratchet Wrench

One of Kent's top five favorite special wrenches. Custom made in our shop. Swivel the head 90 degrees and functions as a great long reach nut driver as well.

On a regular basis, Kent and Gerson custom make tools to make certain jobs go easier and faster. So is the case with this long reach ratchet. It was developed to get glow plugs out of the older diesel engines without having to remove the hard lines.

$22.75

1977 to 1985 Diesel Special 24 mm Oil Filter Housing Fitting Wrench

A Must Have Tool when dealing with stubborn oil cooler hoses

NOTE: May be black or chrome depending upon stock on hand. This standard 24 mm combination wrench is specially ground in our shop so that it will hold the fitting on the late 616 and 617 oil filter housing when loosening the oil cooler hose end nut.

$99.75

201 and 124 Chassis 103 Engine Ignition Spark Plug Wire Set

You can experience a number of engine performance problems with old wires - especially the coil wire.

FITS THE FOLLOWING:  1985 to 1993 W124, W126, and W201 chassis with a 6 cylinder 103 engine. Is your M103 six cylinder engine not running as smoothly as it use to. These wires should be changed at 70,0000 to 80,000 miles for smooth running and peak performance.

$38.50

1968 to 1991 Parking Brake Shoe Repair Kit with Installation PDF Instructions

Does not fit all models. See notes below. Inspect these shoes if you have not - they are hiding inside the rear brake discs!

Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.

10 Side Trim Clip Replacements
$7.95

Side Trim Molding Clips - set of (10)

For W108 W109 W114 W115 W116 R107 and W123 Chassis

10 red plastic clips are included as shown. There are a number of reasons why you would want to remove the center side trim on your older Mercedes. You may just want to clean and detail behind them (it does get pretty dirty back there over the years).

$6.95

Automatic Transmission Nylon Shift Bushing Set of 2

For LATE MODEL (70-73) 108 109 and ALL 114 115 107 116 123 126 201 124 129 and 140 chassis 1968 to 1995

Set of (2). The number one cause of a loose or rattling shift lever is failed or missing shift lever bushings. Our upgraded bushings are made out of nylon and are much tougher than the original plastic type. No instructions or special tools included.

On Demand Video
$15.99

Emergency / Parking Brake Shoe Installation w/ Ease - On Demand Video

Requires Kent's special tool to take the pain out of this job! These are the instructions only.

Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.

$86.75

616 617 Non Turbo Diesel Genuine Front Crank Seal Replacement Kit

For 1968 to 1983 NON TURBO 220D 240D 300D 300CD 300TD 1968 to 1983 with FREE PDF and VIDEO Instructions

This is now becoming one of the most common oil leaks in 1968 to 1985 diesel engines. Let's face it. These engines are getting older and the rubber seal is wearing and becoming more brittle with time.

$74.95

Anodized Aluminum Window Trim Polish Restoration Kit

Bring that new car shine back to most milky and spotted window trim with Miracle Paste! A power tool is required.

Mercedes 114, 115, 107, 116, 123, 126, 124, and 201 chassis window trim has a super strong anodized coating that is impervious to hand polishing but still can oxidize when exposed to harsh environmental elements. When this happens the trim becomes spotted and milky in color and it is NOT pretty!

$68.00

1960s Six Cylinder Gas Engine Front Crank Seal Replacement Kit

For 220S, 220SE, 230, 230SL, 250SL, 250S, 250SE, 280SL, 280S, 280SE and 280SEL (with 6 cylinder engine only)

Unless the engine has been overhauled most of these old 6 cylinder gas engines of the '60s and very early '70s are running around with their original front crank seal. Take a look under your car if you have one - I bet it will look a lot like the engine in the video below.

$2.95

617 Turbo Diesel Transmission Bowden Cable O-ring Seal

For 1981 to 1985 Turbo Diesel 300D 300TD 300CD and 300SD

Custom ordered for a better fit than original! special Oring seal for the bowden cable housing where it connects to the right side of the automatic transmission. This is a common leak area and you may be fooled into thinking it is leaking out of the pan gasket.

$89.50

617 Turbo Diesel Engine OEM Front Crank Seal Replacement Kit

All 300SD 116 and 126 from 1978 to 1985, and all 123 TURBO diesels 300D 300CD 300TD from 1981 to 1985. FREE PDF and VIDEO instructions included.

Includes Kent's four detailed videos on every aspect of this job! This is now becoming one of the most common oil leaks in 1968 to 1985 diesel engines. Let's face it.

$49.95

Windshield Fine Scratch Removal and Glass Polishing Kit

WARNING! Not guaranteed to work on all scratches. WILL NOT WORK ON SAND PITS. Do finger test on wiper scratches BEFORE ordering!!! Read and see more below.

Contains all supplies and video instructions you need - except a multitool (see description. )Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)?

On Demand Video
$12.99

Transmission Bowden Shift Control Cable Removal and Replacement - On Demand Video

Specific instructions for 1981 to 1985 Turbo Diesel Automatic Transmissions

The bowden cable runs from the transmission to the throttle linkage on many Mercedes from the early 1980's up through the early mid 1990's. When this cable fails or is out of adjustment the transmission will either shift too early or too late.

$126.00
Currently out of stock.

2000 to 2006 ABC Rear Control Arm Outer Bushing Replacement Kit

SL500, S500 and CL500. Kent refers to this as the hidden AND forgotten bushing. A MUST to replace these when the control arm has been dropped for rear shock replacement.

I call this the hidden and forgotten bushing. Why? Because you can not see it to inspect it, it hardly ever gets changed. When these bushings wear out you will feel "weird" movement in your rear end, especially going over rough ground.

$66.50

1968 to 1991 Most Models Parking Brake Shoe Replacement Kit with Extras

Kent's special tool and video instructions included. See applicable chassis and model list below BEFORE ordering.

Emergency brake shoe maintenance is often neglected because the rear brake disc / rotor has to be removed to inspect and repair them. If the car has ever been driven a long distance with the emergency brake on, expect problems.

$12.75

27mm 6 Sided 1/2 Inch Drive Socket - U.S.A.

To be used with R107 Fuel Tank Screen Removal Tool + many older gas and diesel front crank bolts

This socket is the correct size to use with our R107 Fuel Tank Screen Removal Tool ( See below:). It is a heavy-walled 27 mm black impact grade socket made in the U.S.A.

Pages