Search | tool

Displaying 301 - 350 of 434
$138.00

Early 3.5 and 4.5 Complete Valve Clearance Adjustment Kit

For 1970 to 1975 350 and 450 Models with D-Jetronic Fuel Injection. Includes tools, and instructions. FREE valve cover gaskets included. This is a NEGECTED maintenance item!

Why do you need to do this?  Valve clearances are supposed to be adjusted on these early V8s every 10,000 miles. You can imagine why this does not get done! Add to the fact owners can not find the right information or tools and it makes neglect even worse Why not on later model years?

$62.00

1978 to 1980 W116 300SD Motor and Transmission Mount Set

Old tired rubber mounts are one of the biggest causes of excessive engine vibration and shake AND noise if they are totally collapsed

On the average W116 300SD nine out of ten times we find these mounts rotten, soft, or collapsed. It is often just due to the age of the rubber.  Have you noticed your engine is shaking more at idle? Maybe you are noticing new vibrations that were not there before.

$38.50

240D 300D 300CD 300TD 300SD Diesel Oil Filter Housing Leak Fix Kit

A VERY common leak! Don't use paper gaskets or it will come back. GENUINE steel reinforced gasket is No longer made! We are the only source for OE-reinforced waffle gaskets!!

This kit fits ALL 116, 123 and 126 4 and 5 cylinder diesels, 616 and 617 designation. This is one of the most common oil leaks on the older Mercedes diesels from 1977 to 1985. It is often found at the gasket between the engine block and the oil filter housing.

24.50
$26.00

Fuel Tank Level Sending Unit Service Kit w/ 2 Instructional Videos

Most models 1968 to 1995 with tubular sending unit inside the fuel tank.

If your fuel gauge stops working or is not reading accurately, many times it can be repaired by removing it from the fuel tank, taking it apart and giving it a good internal cleaning of the contact points, float shaft, and wires.

$99.50

123 116 126 Diesel Fuel Tank Screen Removal and Replacement Kit

GENUINE OEM FUEL TANK SCREEN -- ALL AFTERMARKET BRANDS DISCONTINUED.

Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L. 1977 to 1991 (Does not fit wagons!). Wiill NOT work on 107 chassis. Receive a Related Bonus-Product FREE!

$79.95

2 Quarts of Miracle Paint with Spare Empty Pint Can

Cost saving option when tackling some major rust repair
If you are working on some larger rust areas or rust holes, you will probably need more than one quart to complete your project. This two-quart kit will generally cover and seal all areas if you are doing a rust cleanup on the underside of the car.
$399.00

6 Cylinder M103 M104 CIS Fuel Delivery FID Overhaul Kit

For 1988 to 1993 M103 and M104 CIS powered cars (W201, W124, R129 and W126 chassis)

Most 1988 to 1993 6 cylinder CIS fuel injection delivery (FID) systems are old and tired and have not been properly maintained. These include the W201 190E 2.6, the W124 260E 300E, 300CE, 300TE, the W126 300SE, and 300SEL, and the R129 300SL.

$178.50

190D 200D 220D Early 240D Fast Glow Plug Upgrade w / Manual Push Button Control

All early 4 cylinder diesels 1961 to 1976 - override factory glow system -- PDF Digital Instructions included!

Tired of having to pull and hold the glow / starter knob on your old 110 or 115 chassis diesel? Hand getting tired? Waiting forever to get the glow plugs hot enough to start the engine? Wish the glow plugs would not burn out so often?

$192.95

Early 300D 300CD 300TD Non-Turbo Glow Relay Manual Override Kit w/ Upgrade Plugs

1975 to 1979 5 cylinder non-turbo models - PDF Digital Instructions included!

Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.

On Demand Video
$9.99

How to Use Kent's New Instrument Cluster Removal Tools - On Demand Video

Tips and tricks to get those stubborn clusters out of the dash

This video is free with the purchase of Kent's new dash cluster pull tool set. If you just want to see how he uses the tools and some tricks to get difficult clusters out you are welcome to purchase this video separately.  Approximate run time is 20 minutes.

On Demand Video
Mercedes Muffler Repair - On Demand Video
$12.99

Center and Rear Muffler and Exhaust Pipe Replacement and/or Repair - On Demand Video

Common Rear Exhaust leak troubleshooting, component replacement and hole patching DIY techniques

How can you tell if you have a hole or leak in your exhaust system? What are the symptoms? Can the leak be patched? When will you have to get either a new center muffler or rear muffler or pipes or all three? Can you replace the mufflers yourself and what are the tricks?

On Demand Video
$9.99

How to Properly Install a Foam Hood Pad - On Demand Video

Kent shares all his tips and tricks to get the pad on straight, permanent, and looking good

If you are interested to see how easy it is to install a new hood pad, this video will let you see Kent demonstrate the process step-by-step. If you have purchased one of our hood pad kits, then this video can help you get your new pad lined up and installed properly. 

On Demand Video
Mercedes Ignition Switch Buzzer - On Demand Video
$2.99

How to Replace a Mercedes Ignition Key Lock Buzzer Switch - On Demand Video

When replacing a steering lock this little black switch can be a pain to get off

When replacing the steering lock assembly in your Benz you will need to remove that little black plastic switch on the side of the lock from the old one and put it on the new part. You can not pry it off, squeeze it off or pull it off by hand. 

On Demand Video
W140 Installing New Blower Motor Into Old Fan and Housing - On Demand Video
$9.99

W140 Installing New Blower Motor Into Old Fan and Housing - On Demand Video

Kent will show some specials "tools" and tricks he uses to prevent damaging the plastic squirrel cage fan

One of the cheapest ways to fix your worn out W140 blower motor is to replace just the motor. You do not have to replace the entire unit. BUT repairing it this way is not as easy as it may appear!

$118.95

OM 603 1986 to 1987 Garrett T3 Turbocharger Basic Overhaul Kit

Only fits 6 cylinder 1986 to 1987 300SDL, 300D and 300TD with GARRET TURBO!!!

This kit will allow you to replace the critical worn parts inside the early 603 U.S. made Garrett T3 turbochargers. This kit will not work if your engine has a KKK turbo made in Germany. The only way to tell which turbo you have is by visual inspection.

Sale
$6.00

Small Universal 4" 2 Jaw Puller

CLEARANCE: Can be used to "pull" various small parts off shafts, etc. Not big enough to use on gas or Diesel engine front seal races.

This the exact puller you will receive. Handy for small jobs.

$8.50

Super Thin 14mm Combination Wrench for CIS Pressure Tester Fittings

For tightening and holding the small adapter fitting that goes into the fuel distributor

When pressure testing your KE-jetronic fuel injection,  you may find you need a really thin wrench to install the small fitting on the right side bottom of the fuel distributor.

Sale
$182.00

Magnetic Induction Heater 110v 1Kw w/ Three Coils Included to Attack Stuck Fasteners

If you want miracles to happen with frozen rusty nuts and bolts, this will amaze you. Safe, quick, and very high heat to loosen the offering fastener.

Kent was a little skeptical when you first used this—it sounded like it would be too good to be true. The first use was getting some rusty bolts off the Garrett T3 turbine housing ( some of you know the pain there!). Well, it worked, and it worked very well.

$128.00

M112 V6 Engine Ignition Lead Set

Very high quality. Should be changed around 80K for peak fuel economy. Install tips included.

Fits all V6 engines from 1998 to 2005. Kent feels these are the best. Outstanding quality.

Sale
$18.50

7 Pc. Extra Long Combination Pattern Wrench Set

Includes hard to find 18mm for newer models. 10, 11, 12, 13, 14, 15 and 18mm

You will love this set of long combiination wrenches. Nice plating, smooth surface and thin heads to get into tight places.

$38.00

Older Mercedes Maintenance Special LONG Wrench Set

10mm - 13mm - 14mm - 17mm are the most common fastener sizes and these are unique for special uses.

ONLY ONE SET AVAILABLE. Three of these wrenches are made by Gearwrench. You get a very long standard combination 13mm wrench, a long 10mm with a racheting box, a very long 17mm with a ratcheting box, and finally, a very long 14mm combination wrench made by Urrea.

On Demand Video
$1.99

How to Remove the SLS Hydraulic Pump Center Section - On Demand Video

New procedure 5/8/23 with a revised tool. This is an addendum to the full pump reseal instructions.

This is a short addendum to the full instructions on resealing an SLS hydraulic pump. This will now be included with the reseal kit. Disregard the old method mentioned elsewhere

$152.00

2003 to 2006 AMG V8 Spark Plug Set

Only those AMG models with the M113 engine. S55 CL55 SL55 E55 and CLS55 (2006 only)

FULL SET of correct Bosch spark plugs. These are considerably longer than the stock M113 spark plugs and should only be used in the AMG engines specified above. 16 spark plugs only. No other supplies or instructions are included. 

$9.75

Custom 17mm Crowfoot Wrench for Bosch Hand Primer Pump

This is the bench to safely remove and install this style of hand primer pump. It will not damage the aluminum housing nut.

We modify this wrench right here in our shop. If a picture is worth a thousand words, what is a video work. Watch the following for a full explanation.

On Demand Video
$8.99

How to Replace Late W123 Upper Center Console Light Bulbs - On Demand Video

Applies to 1981 to 1985 123 models with the Generation II Automatic Climate Control

In this video Kent will show you how to remove the center wood panel and the climate control switch panel so you can replace the 5 small bulbs behind it that light up the switch panel and the buttons behind it. It is not as difficult as it may first appear if you understand the procedure.

$8.90

3M Black Super Weatherstrip and Trim Adhesive

This glue is the absolute best one Kent has used. This small tube should be in every tool box!

GREAT for glue on loose rubber, loose wood pieces, and even carpet. The best!

$44.95

OM602 and Late OM603 Special Adapter for Compression Tester

Works on W124 1990 to 1993 300D 2.5, 350SDL, W126 1990 and 1991 350SD / SDL and the W140 300SD and S350

This is a hard-to-find adapter that will need if you have one of the early 1990s 5 and 6 cylinder turbo diesel engines. We machine this right here in our shop and it is designed to work directly with our OM61x compression tester ( see related products below): 

$2.95

1977 to 1985 Diesel Hand Primer Pump Copper Washers ( Set of 2 )

This is a common source of leaks and trying to tighten an old seal can make it worse.

This is a perfect fit for the O.E. copper sealing ring. You only need one but we sell these as a set of two so you will have a spare.

This is where this sealing ring is located. On top of the fuel injection lift pump and at the base of the hand primer  pump:

On Demand Video
$3.99

SLS Pump Center Section Removal - On Demand Video

Supplement to the written overhaul instructions

This video will cover the use of my custom plastic tool to safely remove the steel center section for the outside aluminum housing with rebuilding your older style SLS ( Self Leveling Suspension) hydraulic pump. No other instructions included here.

$16.80

W126 Front Suspension Brake Control Rod Bracket Long Bolts

You may need to replace these if yours are very rusty. They do not come in the joint repair kits.

These are the 4 long bolts that need to be removed when changing your W126 brake rod control joint on your front suspension. There are two on each side. They do not come in the repair kit so if you bolts are very rusty you might want to have these new bolts on hand before you start your repair.

$16.75

OM616 and OM617 Diesel Engine Water Pump Bolt Upgrade Kit

Solve the problem of rusty pump mounting bolts once and for all - Go stainless AND seal them from inside water!

Kent finally went to work to solve the problem of rusty water pump mounting bolts. Once the problem was studied carefully the solution became obvious. Watch the video for a full explanation and partial instructions below.

Kit contents:

$16.75

Best Lug Bolt Socket Ever for Alloy Wheels

Fits all 17mm lug bolts from the 1950's up through the 2000's - prevents scratching the finish on your silver rims.

I do not need to say much about this tool. Well made and well thought out. Someone who obviously was frustrated at scratching the finish on his or her alloy wheels came up with this idea. Watch the video below to see why this is now my favorite go it 17 mm lug bolt socket.

$19.95

OM616 OM617 Injection Pump Check Valve Overhaul Kit

Specific for 220D 240D 300D 300CD 300TD and 300SD 1972 to 1985

This is something many owner's and mechanics miss. That little check valve on the side of the injection pump can cause a lot of starting problems on the older diesels.

On Demand Video
$3.99

M163 ML 320 430 500 - How to Get the Hood Straight UP - On Demand Video

There are no quick levers to pull like on other models, but with the right tools and know how you can get the hood straight up quickly.

Many owners are surprised to learn that their early ML's hood can actually be adjusted to go almost straight up. It is not as easy to do as some of the earlier models where you only had to flip a couple levers.

$12.75

1977 to 1985 Diesel Fuel Shut Off Inspection and Switch Protection Filter

Includes installed vacuum hose as shown (see video for installation instructions)

Connect this small filter with attached hoses to the back of the injection pump and to the brown plastic vacuum line going to your ignition switch under the dash. The filter will do two things. 1. Help to trap oil coming out of a leaking shutoff valve before it gets to your ignition switch. 2.

Pages