Search | tool

Displaying 351 - 400 of 432
$28.50

615 616 617 Diesel Engine Injection Pump Timing Drip Tube

For setting Injection pump timing per factory manual.

For use on 220 240D 300D 300CD 300TD 300SD 1968 to 1985. NO INSTRUCTIONS INCLUDED: The tool is meant for someone who has the factory manual or who already knows how to adjust their injection pump timing on the older diesel engines. Injection pump timing is critical for peak performance.

$20.50

Early Chassis Power Steering Replaceable Filter

Fits 110 111 112 113 108 109 107 114 115 116 Models with Power Steering Listed below

January 2019 notice: This filter is now available only in very limited quantities and may not be readily available in the future. This is why we are not able to include it in our full fluid flush kit ( See related products below) This is an often neglected filter.

Late 107 and 123, 126, 201, 124 Chassis Ignition Switch Only
$54.60

Late 107 and 123, 126, 201, 124 Chassis Ignition Switch Only

Genuine Mercedes Benz Switch - Does not fit all - READ DESCRIPTION CAREFULLY

This GENUINE MERCEDES switch will work on all 107 chassis 380SL and 560SL 1981 to 1989, all 126 chassis sedans and coupes 1981 to 1991 , all 123 chassis 240D 300D 300CD 300TD from 1981 to 1985, all 201 chassis 190E 2.6 and 190D ( 190E 2.3 up to 1988 ONLY) and all 124 chassis from 1986 to 1993.

$4.25

Diesel and Gas Early Automatic Transmission Tube Sealing Rings

For 3 banjo bolt connections 1970 to 1980

Some of the most common auto transmission leaks on the early automatics come from the banjo bolts that connect the filler tube to the bottom of the pan and the two transmission coolers lines to the lower front transmission housing.

gasoline fuel tank screen
$39.50

Late 126 201 124 GASOLINE models Fuel Tank filter Screen

Fits the Following: Late 126 201 124 chassis, Gasoline Models only!  1982-1983 380SEC, 1984-1985 380SE, 1984-1985 500SEL, 1987-1993 190E 2.6, 1986 to 1989 300E, 1990 -1993 300E 4matic, 1990-1992 300CE, 1988-1991 300SEL, 1992-1993 400E, 1986-1991 420SEL, 1986-1991 560SEL / SEC.

$89.50

W123 Genuine Glove Box Door Inner Plastic Panel - USED

1977 to 1985. Fits all sedans, coupes, and wagons. With special upgraded hinge nuts and tool as shown.

If your glove box won't stay closed due to a broken plastic panel inside, then this is the part you may need to fix the problem. The latch inside this panel is mounted on a plastic pin, and when this pin breaks off, there is no good way to repair it.

$269.00
Currently out of stock.

Early W126 Klima Heater Control Monovalve Conversion without Heated Windshield Washer Fluid Tank

Free Performance Kit Included. For most 126 sedans and coupes 1981 through 1985. Replaces the original Bosch valve on ACCIII U.S. Automatic Climate Control cars - Limited Stock

PLEASE NOTE In stock now and ready to ship. No detailed instructions at this time, but it is not a difficult install this unit once you remove the false firewall at the back of the engine. You will be able to gain access to the monovalve and electric pump assembly.

On Demand Video
Mercedes 115 Fuel System Service Video Manual - On Demand Video
$8.99

W115 Diesel Engine Major Fuel Service - On Demand Video

Covers fuel system service and repair on the 1969 to 1976 220D 240D and 300D only

Kent uses his 1976 240D that had sat idle for 6 years to demonstrate what needs to be done to get an old fuel system cleaned out and serviced properly. This always includes installing new fuel filters and sometimes will require replacing some of the rubber hoses.

$12.75

W123 Wood Shift Cover Rear Hold Down Replacement Pin w/ Video Instructions

These are always broken off! We custom make these here.

Fits all models 1976 to 1985 with a wood shift cover. 240D 300D 300CD 300TD 230E 280E and 280TE.  A very common issue that plagues almost all W123s. The factory pin in the back on the wood shift cover seems to always break off, leaving the wood piece loose in the center console.

$13.75

W123 W126 OM616 OM617 Diesel Motor Mount 8mm Heavy Duty Long Socket

Made in Taiwan. Very hard steel. This is a sharp edge impact socket for maximum strength. For most diesels 1977 to 1985 except W116 300SD (requires 10mm)

Removing the front rubber engine mounts requires getting under the car and going up inside a hole in the subframe to remove the main bolt. And it can be a bear! I don't know who they hired to tighten these at the factory, but he must have been a brute.

On Demand Video
104 Mercedes Head Gasket Part 2 - On Demand Video
$12.99

M104 Gas Engine Head Gasket Replacement Part 2: Cylinder Head Removal - On Demand Video

A step-by-step procedure for properly removing the head from the engine

In this on demand video you will get to watch Kent remove the cylinder head from his 1990 R129 300SL with the 104 twin cam straight 6. This is a highly detailed video on how to do it without making the mistakes that many others have made. The job must be done with understanding and great care.

On Demand Video
$24.99

Early SLS Rear Suspension Leveling Valve Overhaul Instructions - On Demand Video

If your valve is leaking or not raising the rear of your SLS Benz, you can fix it yourself and save Big $$$

In this long video manual Kent will walk you step-by-step through the process of removing the older square style leveling valve from your Mercedes, opening it up without losing the spring and balls, removing the old o-rings and cleaning the parts properly, installing the new o-rings, and putting

$28.95

1/2 Inch Drive Clicker Torque Wrench 20 - 150 Ft. Lbs.

A must have for any DIYer. Especially diesel fuel injectors and wheel bolts!!!

If you are going to work on your diesel fuel injectors, you are going to need a torque wrench. If you are going to tighten your alloy wheel lug bolts properly, you should use a torque wrench. In fact, if you do your own work, you should have a 1/2-inch clicker torque wrench in your toolbox.

On Demand Video
Removing Fuel Tank
$4.99

Removing and Replacing an Older Mercedes Diesel Fuel Tank - On Demand Video

Sometimes this is the best fix for a super dirty tank - and you can do it yourself!

Why would you need to remove a fuel tank? If it is heavily rusted or contaminated sometimes it is just easier to find a good used fuel tank and replace it. Trying to clean a heavily gummed up fuel tank is a real challenge.

$49.95

OM616 and OM617 Diesel Engine HIGH Pressure Injection Pump Timing Kit

Comes with HOUR LONG VIDEO instructions. Requires pressure tank for accurate and consistent results.

Kent's procedure uses the factory recommended "drip tube method" but with a "twist." He has devised a way to get accurate and consistant IP timing results while trying to get the drip tube to drip at one drip per second exactly when it should!

$29.75

M116 and M117 LATER V8 NGK Spark Plug Set of 8

Bosch plugs are currently NLA. These NGKs are currently the best solid copper core plugs you can get for the later 4.5, 3.8, 5.0, 4.2 and 5.6 V8's

These will fit all 1976 to 1991 4.5, 3.8, 5.0 and 5.6-liter V8 engines with Bosch C.I.S fuel injection.  PLEASE NOTE: These spark plugs have an aluminum end cap that does screw off. You will receive the plugs with the end cap installed.

$29.00

M116 and M117 EARLY V8 BOSCH Spark Plug Set of 8

Best plugs you can get for these early 3.5 and 4.5 V8's AND the only ones you should use.

These will fit all 1970 to 1975 3.5 and 4.5  V8 engines with D-Jetronic fuel injection (electronic). Do not use NGK, Platinum or any other kind of "special" spark plug. You will be sorry. Use only these Bosch Super plugs.

On Demand Video
$18.99

MFI Fuel Injector Tester: Assembly, Testing and Cleaning Operations - On demand Video

A video instruction manual explaining in detail how our special tester kit works

Would you like to find out how well your old (1959 to 1972) mechancial gasoline fuel injectors are working? Now you can do it yourself at home with our custom bench mount hand pump pressure tester and cleaning kit. These are the full instructions that come FREE with the kit.

107 Tie rod kit
$94.50

113 108 109 114 115 Early 107 Front Steering Tie Rod Replacement Kit

Fits many models from early 1960s up the late 1970's - see list below

All 280SL 450SL 380SL 1972 to 1985. All 230SL 250SL 280SL. All 108 and 109 Sedan from 1965 to 1973 including 280SE/L 5.4 and 300SEL 3.5 and 4.5. All 114 and 115 sedans and coupes from 1968 to 1976 including 220D 240D and 300D. We are now offering a kit with 2 new tie rods.

On Demand Video
Mercedes Brake Caliper Removal - On Demand Video
$6.99

Brake Caliper Rebuilding Part 1: How to Remove Frozen Pistons From Brake Calipers - On Demand Video

Part 1 of 3 Parts: For Mercedes brake calipers from the early 1960's to the late 1990's

You can save a lot of money if you can rebuild your old brake calipers, especially on some older models. If you can just get the pistons out of the housings, most calipers are rebuildable, unless they have been subject to road salt or have sat exposed to the weather for years without use.

$27.95

616 617 Diesel Vacuum Connector Service Kit

For 1975 to 1985 240D 300D 300CD 300TD and 300SD with the 61x diesel engine

FITS THE FOLLOWING: 115, 116, 123, and 126 chassis. Here is a diesel item I have put together that every Mercedes diesel owner should have.

$18.50

Modified 22mm Open End Wrench for Oil Cooler Fittings

Helps to prevent damage to valuable oil cooler. See video below. Also multi-purpose uses.

This custom-made thin head wrench by Kent Bergsma can save the day and your pocketbook.  It is very important that you hold the fitting base on the oil cooler when removing the oil cooler hoses. A regular 22mm wrench is almost always too thick and can also cause damage.

$28.50

126 Window Regulator Plastic Slide Replacement Kit

W126 chassis Gasoline and Diesel models 1981 to 1991

Fits all 126 chassis sedans 1981 to 1991. Depending on the type of regulator you have it may or may not apply to all four of your doors. Recommend you remove the door panel first to inspect (see below).

$46.95

Door Hinge Complete Lube Kit w/ Video Instructions

Do not neglect the door hinges and latches on your older Benz

Ever wish you could find a good way to lube the door hinges on your old Benz? Maybe you have seen that little fitting wondering what it is, or maybe you have heard there is a special grease gun that can inject grease into that fitting?

$12.50

R107 Wood Shift Cover Rear Hold Down Replacement Pin

Known to fit 1976 to 1989 450SL, 380SL, and 560SL. May fit earlier models but please check your wood before ordering

This replacement part that we make here in our own shop is built stronger with a solid core pin so it will not break off like the originals ( See 560SL wood below for reference ). The original is only stapled on and is prone to fall off with age.

$38.75

W116 and Early W123 Gasoline Model Fuel Tank Outlet Filter Screen

All W116 gas models from 1973 to 1980 including the 6.9 and W123 280E and 280CE only.

It has now become essential that you replace this filter screen on these old cars, especially if they have been using gasoline with ethanol in it and the car has sat or sits for long periods without running.

$24.95

Miracle Paint For Permanent Rust Repair PINT Black - Free Brushes and Gloves

PLEASE NOTE: This kit contains liquids that can only be shipped by UPS ground. Due to this requirement we can only ship to the continental lower 48 States Sorry for this inconvenience.

NEW and improved HD formula. This new formula has a thicker viscosity for easier application on vertical surfaces and when using fiberglass cloth.Miracle Paint is a unique moisture cured non-porous paint that bonds to rusted and corroded metals like no other coating.

$15.95

124 Chassis Heater and A/C Motor Repair Manual - By Kent Bergsma

For all Mercedes 124 chassis cars from 1986 up to 1993 ONLY. This includes the 260E, 300E, 300D, 300CE, 300TE, and 400E

This is the repair manual you 124 owners have been waiting for.  Includes wiper motor removal instructions! If your blower motor has been intermittent or some days it will not come on until you drive for a while, your motor brushes are most likely at the end of their life.

$12.75

126 Heater and A/C Motor Repair Manual - by Kent Bergsma

Fits all Mercedes 126 chassis cars from 1981 to 1991. This includes the 300SD, 380SE, 380SEL, 500SE, 500SEL, 300SDL, 420SEL, 560SEL, 300SE, 300SEL, 380SEC, 500SEC, 560SEC.

This repair guide will take you through the process of how to properly remove your heater blower motor and replace the motors two brushes. This is the most common reason for failure. 

$169.50

126 Chassis Front Bilstein Shock Absorber Set of (2) - HEAVY DUTY

Fits models listed below and includes PDF instructions - Needed socket sold separately

Fits 126 Chassis sedans and coupes 380SE 380SEL 380SEC 500SEL 300SD 300SDL 350SD 350SDL 420SEL 300SE 300SEL 560SEC and 560SEL from 1981 to 1991. The best way to restore the original ride and feel of your Mercedes is to replace your shock absorbers with new Bilsteins.

$169.50

123 Chassis New Front Bilstein Shock Set of (2) HEAVY DUTY

For agressive driving on hauling heavy loads - PDF INSTRUCTIONS

FITS THE FOLLOWING all 123 chassis from 1977-1985 which include the 230, 240D, 240TD, 280E, 280CE, 300D, 300CD and 300TD. The best way to upgrade the original ride and feel of your Mercedes is to replace your shocks with new HEAVY DUTY Bilsteins.

$42.95

Miracle Paint For Permanent Rust Repair QUART Black - Free Brushes and Gloves

Receive Related Bonus-Product Free! (Can only be shipped UPS Ground)

NEW and improved HD formula. This new formula has a thicker viscosity for easier application on vertical surfaces and when using fiberglass cloth. Miracle Paint is a unique moisture cured non-porous paint that bonds to rusted and corroded metals like no other coating.

$3.75

1972 to 1991 Windshield Washer Fluid Tank Filter Upgrade Kit

Works on almost all models with electric pumps

Contamintion in the window washer fluid tank is one of the main reasons the spray nozzles get plugged up.  Install this little fitler somewhere in the line between the pump and the nozzles on the hood and secure with zip ties.

Diesel Fuel Tank Filter Screen with New Seal
$44.50

123 116 126 201 124 140 210 Diesel Fuel Tank Filter Screen with New Seal

GENUINE MERCEDES PART. Common source of undiagnosed lack of power issues.

Fits all diesel Sedans AND coupes only from 1977 to 1999 (Does not fit wagons!) including chassis 116, 123, 126, 201, 124, 140 and 210 chassis. 190D 240D 300D 300CD 300SD 300SDL 350SD 350SDL 300D 2.5 and E300D 1977 to 1999.  This is an important maintenance item.

$8.45

Loctite Metal Flange Gasket Maker - Small Tube ( 6 ml )

Very best sealant for differential covers and other flat mating surfaces that do not use a gasket. Will not deteriorate like silicone RTV

Here is my all-time favorite gasket maker and sealant. You may already know how I feel about RTV silicone products (I think they should be outlawed!). We have had a number of our customers ask us where to get this so we decided to offer it on our website.

$394.00

1980 to 1985 380SL 380 SLC Steering Lock w/ Tumbler and Keys - NEW

Now with 2 matching high-security keys. Steering locks are in short supply, and reports they will not be made again.

We have been informed that there is no plan to manufacture new steering locks again for these classic cars. This will also fit the European R107 280SL.

On Demand Video
$12.99

How to Replace the Level Control Valve on Your Airmatic Suspension - On Demand Video

This part is often overlooked - not hard to replace - but if not done right could end up expensive and very frustrating

In this video, I will go over the procedure of removing and replacing the level control valve in your older Mercedes with Airmatic suspension. The work here will be performed on a 2000 W220 S500. Other models may have the valve located in a different position with slightly different mounting.

Pages