Search | tool

Displaying 51 - 100 of 357
$179.50

W123 Oil Pressure Gauge Actuator with Free Instructions and Tool

Fits all 123 chassis 1977 to 1985 - common source of oil leak under dash

Oil leaks at the oil pressure gauge are becoming an increasing problem on the 123 chassis, particularly on the 1977 to 1985 diesel models. You will discover it when you see wetness at the bottom lip of your instrument cluster or you find oil leaking on your feet or legs!

$28.75

"Rust Buster" Attachment Kit with Extras Including Video Instructions

You will have to supply your own multifunction tool similar to the ones we sell in our aluminum and glass polish kits ( see list below)

If you already have a multi-function tool or you plan to buy either our glass or anodized aluminum polish kit ( see below ) you really don't need a second tool unless you want to dedicate one just for "banging" on rusty fittings and bolts. We offer this same kit with the tool included.

$23.00

M112 V6 M113 V8 Engine Spark Plug Boot Removal Tool

A MUST have tool when changing plugs or plug wires on all 1999 to 2006 M112 and M113 engined Mercedes

If you think you can pull the plug wires of the spark plugs safely on these engines without this tool go ahead and try. Of course you could make your own "pry too" but you are probably going to need metal cutting and welding equipment.

$28.50

Custom Made Large Angled Head Clamping Tool

Multiple uses for hose removal, assembly, and holding parts safely for cleaning and polishing.

This is one of Kent's favorite tools around his shop. It is used almost daily. The tool rose out of a need to be able to safely hold fuel inectors while cleaning when with a large high speed wire wheel. No tool like this is availabe so it had to be built in our shop!

On Demand Video
$29.99

Removing Rusty Bolts, Nuts and Fittings with Kent's Rust Buster Tool - On Demand Video

You can not believe how well this works - Let high speed vibration do the work - Save knuckles, frustration and money!

This video is intended to be used as instructions when purchasing Kent's Rust Buster Tool. It can be viewed separately but you will need the tool to apply the principles. This video is included free of charge when purchasing the tool. See related products below:

$24.75

Heavy Duty 11 Piece Trim Removal Tool Set w/ Storage Pouch

Made of nylon instead of ABS or plastic. Very tough. Best Assortment Available.

This is one set that will pretty much do it all: door panels, radio, windows, interior trim, exterior trim, engine, fastener plugs, seals, etc. Strong enough to even change a bicycle tire...

$39.75

Tire Shop Pain Prevention 17mm Lug Bolt Tool Set

Since tire shops won’t do it, you need to set proper torque on your wheel lug bolts!

This is a MUST HAVE wheel care kit EVEN if you don’t work on your own Mercedes. This is one thing you must learn how to do because you can not trust tire shops anymore. See some videos below and I will explain why I feel so strongly about this.

$12.95

Maintenance - 10 Inch CURVEDLocking Clamp Plier - Injector Return Hose Tool

Lets you reach into tight places - very long nose curved pliers with teeth - like hemostat

This is one of Kent's favorite tools. Lets you reach into tight places - very long nose curved pliers with teeth - like hemostat. With the locking handles it is amazing what this clamp / pliers can hold - and the tight places it can get into!

$11.25

1977 to 1985 Diesel Fuel Filter Removal Tool - USA Made

22mm long wrench with tight fitting head makes removal and install a breeze

When removing the main fuel filter you need a wrench that is usually not included in most tool sets. Ours is high quality made in the USA and will easily remove the filter bolt without rounding off the corners. Works on W116 and W126 300SD and W123 240D, 300D, 300CD, and 300TD. 

$4.99
Currently out of stock.

M163 ML 320 430 500 Easy Hood Strut Adjustment Tool Set w/ Video Instructions

Easy way to get your ML hood in the upright position for engine maintenance

This simple tool set will save you much frustration and possible damage to yourself or to your ML hood. These tools allow you to remove the hood struts easily without damaging the spring clip or ball socket. Also works on many other hood and tail gate struts (like the Suburban).

$9.95
Currently out of stock.

Factory Body Undercoating and Heavy Rust Removal Tool

Electric Drill 1-Inch by 1/4-Inch High Performance Carbon Knot Wire End Brush, 0.020-Inch Wire

Kent has tried a lot of different tools over the years to remove body undercoating and rust in preparation for Miracle Paint rust repairs. This is his favorite, especially for small rust repairs like he will show you below:

$6.95

O-ring Removal Fine Point Pick Tool Set

Best set Kent has found to remove orings in hard to get to locations

This set of 5 pick tools have very thin and sharp points. Best set Kent has found to remove orings in hard to get to locations. The variety of angles available allows you to get into almost anywhere to remove and o-ring, sealing ring or other small part. Comes in protective plastic case.

$159.95

Kent's Super Multi-Tool Auto Detail and Repair COMBO Kit

So you thought the multi function tool was only for woodworking. Kent has adapted it for automotive use and it rocks!

Want the best, fastest, and easiest way to polish faded anodized aluminum trim, to remove fine scratches from your glass, to loosen rusted and stuck fittings and bolts, and to sand rust out of tight places? - enter the multitool or multi-function tool.

$22.95

Fluid Maintenance - Radiator and Fuel Hose HD Pinch off Pliers

Best tool for secure clamp-off in tight locations - produces super tight seal on larger hoses

I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places.  Many do not stop every last drip from coming out of the hose.

$11.95

115 116 123 126 201 124 Diesel HEAVY DUTY Rubber Exhaust Hangers x 4

NEW DESIGN - Best exhaust hangers for rattle prevention - and they stay on!

Fits all DIESEL ENGINE exhaust systems for 115, 116, 123, 126, 124 and 201 chassis from 1968 to 1995. If you are looking for a more robust exhaust hanger this is it! It is a stronger and more secure exhaust hanger than the standard round rubber type.

Rubber Exhause Hanger Set Soft Type
$8.25

Rubber Exhaust Hanger Set Soft Type set of (4)

Here is a brand new set of four exhaust "donuts". Check your existing rubber hangers on your exhaust. If they are cracked replace them before you lose your mufflers! If your exhaust is rattling, these should fix the problem. Fits all chassis models 108 107 113 116 123 126.

$28.50

M130 M180 Special Valve Adjustment 17mm Socket Wrench

Adjusts valves on Early 4 and 6 Cylinder Gas Overhead Single Camshaft Engines - Check the nut size of your adjusters BEFORE ORDERING - 17mm

We have been looking for a long time to find a super strong and well made tool to adjust those tough 17 mm ball adjuster sockets on the early 4 and 6 clyinder gas engines.

$89.50

123 616 617 Non Turbo Pre-chamber ( Used )

Fits 220D 240D 300D 1970 to 1979 Non Turbo Only

Excellent used prechamber for the early W115 and W123 non-turbo diesel. This part is no longer available new. These have been cleaned and checked and are in top condition. 

$7.85

19mm USA Locking Capable Crowfoot Wrench

Best wrench to use when installing or removing our diesel Monark hand primer pump

This is the best tool to use when installing or removing the Monark hand primer pump. PLEASE NOTE. This is 19mm and will NOT work on the Bosch hand primer pump or other style pumps (most others are 17 mm).

$52.75

616 617 Non Turbo Diesel Front Crank Seal Replacement Kit

For 1968 to 1983 NON TURBO 220D 240D 300D 300CD 300TD 1968 to 1983

This is now becoming one of the most common oil leaks in the older diesel engines. Lets face it. These engines are getting older and older and the rubber is becoming more brittle with time.

On Demand Video
$15.99

Replacing and Servicing SNAP CAP Style Ignition Key Tumbler Assemblies - On Demand Video

Old version no longer available: Please see new version in related products below

This video is not only going to show you how to remove and replace the “SNAP cap” style tumbler, but it also going to explain the theory of operation and how to avoid certain pitfalls when doing this job yourself. And YES, there are pit falls.

$5.95

Automatic Transmission Nylon Shift Bushing Set of 2

For LATE MODEL (70-73) 108 109 and ALL 114 115 107 116 123 126 201 124 129 and 140 chassis 1968 to 1995

Set of (2). The number one cause of a loose or rattling shift lever is failed or missing shift lever bushings. Our upgraded bushings are made out of nylon and are much tougher than the original plastic type. No instructions or special tools included.

617 Diesel Fan Clutch Bolts
$38.50

300D 300TD 300CD 300SD Diesel Fan Clutch Bolts

Hard to remove and install if heads have been rounded off - Brand new OE

Fits All 115, 116, 123, and 126 5 Cylinder Diesel engines. This kit comes with (4) brand new OEM fan clutch bolts. Very handy to have on hand when you are changing your water pump or fan clutch out!

$98.50

201 and 124 Chassis 103 Engine Ignition Spark Plug Wire Set

You can experience a number of engine performance problems with old wires - especially the coil wire.

FITS THE FOLLOWING:  1985 to 1993 W124, W126, and W201 chassis with a 6 cylinder 103 engine. Is your M103 six cylinder engine not running as smoothly as it use to. These wires should be changed at 70,0000 to 80,000 miles for smooth running and peak performance.

On Demand Video
$19.99

Emergency Brake Shoe Installation w/ Ease - On Demand Video

The right tool and procedures can take the pain out of this job! Let Kent show you how.

Kent came up with this kit because of all the times he replaced e-brake shoes only to end up with battered knuckles and extreme headaches. This video is included free with the purchase of the toolkit.

$69.95

Anodized Aluminum Window Trim Polish Restoration Kit

Bring that new car shine back to most milky and spotted window trim with Miracle Paste! A power tool is required.

Mercedes 114, 115, 107, 116, 123, 126, 124 and 201 chassis window trim has a super strong anodized coating that is impervious  to hand polishing but still can oxidize when exposed to harsh environmental elements. When this happens the trim becomes spotted and milky in color and it is NOT pretty!

$112.50

616 617 Diesel Water Pump Installation Kit w/ Limited Instructions

For 123 300D 300CD 300TD and 116 / 126 300SD 1977 to 1985. Fits SOME 240Ds see notes below

We do sell the water pumps individually, but we decided to offer this complete kit to make a diesel pump installation go easier. If you have rounded off bolts and no special wrench, removing the fan from the front of the water pump can be a REAL test of your patience.

$54.50

617 Turbo Diesel Engine Front Crank Seal Replacement Kit

All 300SD 116 and 126 from 1978 to 1985, and all 123 TURBO diesels 300D 300CD 300TD from 1981 to 1985.

This is now becoming one of the most common oil leaks in the older diesel engines. Lets face it. These engines are getting older and older and the rubber is becoming more brittle with time.

$6.25

8 Pc. 0,05 mm Thin Shims For Diesel Fuel Injector Pressure Adjustment

For all 615 616 617 601 602 603 engines 1961 to 1995 - No Instructions

PLEASE NOTE: These eight shims will not likely be enough to adjust a full set of 4 to 6 diesel injectors. This is a -fill in-kit and will help when you need extra THIN shims to adjust one or two injectors on models 190D 200D 220D 240D 300D 300CD 300TD 300SD 300SDL and 350SDL.

$1.95

617 Turbo Diesel Transmission Bowden Cable O-ring Seal

For 1981 to 1985 Turbo Diesel 300D 300TD 300CD and 300SD

Genuine Mercedes special Oring seal for the bowden cable housing where it connects to the right side of the automatic transmission. This is a common leak area and you may be fooled into thinking it is leaking out of the pan gasket.

On Demand Video
$12.99

Transmission Bowden Shift Control Cable Removal and Replacement - On Demand Video

Specific instructions for 1981 to 1985 Turbo Diesel Automatic Transmissions

The bowden cable runs from the transmission to the throttle linkage on many Mercedes from the early 1980's up through the early mid 1990's. When this cable fails or is out of adjustment the transmission will either shift too early or too late.

$5.85

Electrical Female Plug Contact Cleaner Brush and Anti-corrosion Kit

Four different sizes of stiff nylon brushes to get into those small plug holes with dielectric grease and applicators

The electrical plugs on 1995 and older Mercedes have a tendency to corrode when exposed to high moisture enviornments. When they do corrode - you will not see the corrosion - and you can end up having all kinds of weird electrical problems.

On Demand Video
$6.99

M103 and M104 Straight Six Serpentine Belt Removal and Replacement - On Demand Video

For 1986 to 1993 Six Cylinder gas engines - both single and twin camshaft.

If your serpentine belt is starting to crack or the back side is worn smooth, you need to replace it. If you are hearing strange noises from the front of your 1986 to 1993 six cylinder gas engine, you will need to remove the belt to troubleshoot the problem.

$39.95

Windshield Fine Scratch Removal and Glass Polishing Kit

Contains all supplies and video instructions you need - except a multitool (see description)

Ever wish you could get rid of the annoying wiper scratches on your front windshield (or rear hatch glass if you have a rear wiper)? How about those fine scratches in your side windows caused by dirt in the scrapers with rolling the windows up and down.

$12.95

Emergency Brake Repair and Adjustment Manual by Kent Bergsma

ALL Mercedes CHASSIS 111 113 108 109 114 115 107 116 123 126 201 124 129 140 from 1968 to 1995

Older Mercedes have a very effective emergency brake design which was virtually the same on all models from the late 1960s right up through the early 1990s. The actuating mechanisms are all mechanical and are controlled by a Y cable under the car.

$38.95

Late 60x (602 and 603) Diesel Prechamber Collar Nut Socket

Special Splined Socket

This is a special pre-chamber collar nut removal socket ONLY that works on the diesel engines in the 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).

$145.00
Currently out of stock.

M116 V8 Timing Chain and Upper Guide Rail (3) Replacement Kit w/ Written and Video Instructions

Prevents Catastrophic failures on 3.5 and 4.2 liter V8 engines from 1970 to 1991 and the 3.8 (380) engine from 1982 to 1985

If you own a Mercedes with the M116 V8 engine (expect 1980 to 1982 380 engines with single low chains) timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine.

$185.00
Currently out of stock.

OM 617 Turbo Diesel Automatic Transmission Bowden Cable

USED CABLE ---- Fits 1981 to 1984 Turbo 300D, 300CD, 300TD and 300SD with free video instructions

No expedited shipping!! USED PART--  Must be removed from car. Expect 3 to 5 day delay to ship.  Very good used working bowden cable with good plastic threads on the adjuster. No longer available new. This will not fit the 1985 transmissions with the black modulator.

$159.50
Currently out of stock.

M117 V8 Timing Chain and Upper Guide Rail (3) Replacement Kit w/ Written and Video Instructions

Prevents Catastrophic failures on 4.5, 5.0, 5.6 liter V8 engines from 1972 to 1991. NOTE: Oil tube clips and valve cover gaskets available separately

If you own a Mercedes with the M117 V8 engine timing chain failure can really ruin your day! If the engine it turning at high speed when this happens, it can destroy the engine. If it happens at low speed, you may get away with removing the heads and replacing some bent valves.

$15.95

ALL Models Wheel Mount Alignment Pin

This makes installing a wheel a breeze on your older Mercedes - will not fit W140 W220 or some newer models

Use on 110, 111, 112, 113, 108, 109, 107, 114, 115, 116, 123, 126, 124, and 201 Chassis. I am sure we have all tried to hold a wheel onto the hub while trying to start a lug bolt at the same time!

$44.50

617 Turbo Diesel Transmission Front Reseal Kit - Late

For Late 123 and 126 chassis 1981 to 1984 Turbo transmissions only - Other models coming soon.

This is the most complete front reseal kit on the market today. It includes Kents new IMAGE-BY-IMAGE instructions. That means there is an image for every single step in the operation of replacing these 2  (Yes there are 2!) critical front seals.

$28.00
Currently out of stock.

Late 60x (602 and 603) Diesel Prechamber Removal Adapter Fitting

Not a complete tool but it will allow you to make your own puller

 This is a special pre-chamber fitting ONLY that will allow you to make your own prechamber removal tool for the 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).  You will need to purchase a 5 lb slide hammer as shown here

Pages