Search | tool

Displaying 151 - 200 of 357
$162.50

190D 200D 220D Early 240D Fast Glow Plug Upgrade w / Manual Push Button Control

All early 4 cylinder diesels 1961 to 1976 - override factory glow system -- PDF Digital Instructions included!

Tired of having to pull and hold the glow / starter knob on your old 110 or 115 chassis diesel? Hand getting tired? Waiting forever to get the glow plugs hot enough to start the engine? Wish the glow plugs would not burn out so often?

$176.95

Early 300D 300CD 300TD Non-Turbo Glow Relay Manual Override Kit w/ Upgrade Plugs

1975 to 1979 5 cylinder non-turbo models - PDF Digital Instructions included!

Fits the Following, 1975 to 1976 ONLY 115 chassis 300D and 123 chassis 300D 300CD and 300TD from 1977 to 1979 with series style loop glow plugs. SVO / WVO applicable. If you are tired of glow plug problems, then this kit is made for you.

$229.50

617 Diesel Garrett T3 Turbocharger 200K High Performance Overhaul Kit

For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985

For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985. Buy the complete kit and save! If your Garrett T3 turbo has over 200K Kent highly recommends you plan on doing the complete overhaul.

$18.25

Garrett T3 Overhaul - Custom T Handle Style Wrench

For proper torque on turbine shaft nut 617 300SD 300D 300CD 300TD

When overhauling the Garrett T3 turbocharger you need a "T" handle wrench to properly torque the turbine shaft end nut. The problem is you may need two of these special wrenches. The original nut iis 3/8 inch SAE and most of the replacement nuts are 10 mm.

$74.95

116 123 126 201 Chassis Hydraulic Suspension SLS Pump Resealing Kit

For most models with self leveling suspension from 1977 to 1991 - 6.9, 300TD, 16V, 560SEL SEC

Every one of these pumps I have ever seen need resealing. The seals and o-rings become just too hard over all those years of use. This is the most complete SLS (self leveling suspension) pump overhaul kit on the market today.

$44.95

Miracle Paint Preparation Kit for Rust Pitted Surfaces

This is the best tool and attachments to use for cleaning small hard-to-get-to rusted metal surfaces

Over the years I have used lots of different methods to clean off rust before applying Miracle Paint. This is the best and quickest method I have found. This is a great tool that can be used for many other things like cleaning off brake hubs and rotors.

$6.95

8 Pc. 0,10mm Thin Shims For Diesel Fuel Injector Pressure Adjustment

For all 615 616 617 601 602 603 engines 1961 to 1995 - No Instructions

PLEASE NOTE: These eight shims will not likely be enough to adjust a full set of 4 to 6 diesel injectors. This is a -fill in-kit and will help when you need extra THIN shims to adjust one or two injectors on models 190D 200D 220D 240D 300D 300CD 300TD 300SD 300SDL and 350SDL.

$64.50

114 115 Chassis Driveline Center Support Overhaul Kit

For all 220D 240D 300D 250 250C 280 280C 1968 to 1976 drive shafts

ALWAYS replace the drive shaft center bearing when replacing the rubber mount carrier. The rubber seems to always go first. The bearing may seem ok but it is easy to stress or damage an old bearing when removing and replacing a bearing carrier.

On Demand Video
$14.99

Replacing and Servicing Screw Cap Style Ignition Key Tumbler Assemblies - On Demand Video

For select models 1975 to 1989. With the right tools and knowledge you can do this yourself sitting in the car!

This video is not only going to show you how to remove and replace the “screw cap” style tumbler, but it also going to explain the theory of operation and how to avoid certain pitfalls when doing this job yourself. And YES, there are pit falls.

On Demand Video
$12.99

Restoring 1980 and Older Rubber Vacuum Door Lock Actuators - On Demand Video

This only applies to those actuators that do NOT have cracks or tears in the rubber diaphragm

If your early door lock actuators do not have any cracks in the rubber diaphragms, but they just won't hold vacuum - it may be possible to fix them by taking them apart and cleaning and resealing the outer lip of each diaphragm.

$79.95

Complete Lubrication Kit w/ Applicators in Carrying Case

This is your grab-n-go for all your lubrication needs on your older Benz

If you own and maintain an older car (especially 15 years and older) you must be willing to take care of its lubrication needs or you may spend big money later in repairs.

123 126 Chassis Driveline Center Support Overhaul Kit
$59.50

123 Chassis Driveline Center Support Overhaul Kit

All Models 240D 300D 300CD 300TD 280E 280CE 1977 to 1985 Only

I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.

$67.95

Early 126 Chassis Driveline Center Support Overhaul Kit

For 1981 to 1985 300SD 380SE 380SEC 380SEL 500SEC 500SEL

I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.

$12.50

1980 to 1985 Steering Wheel Hex Bolt

Fits 1980 to 1985 W123 and W126

Very good bolt with tight hex. Always use thread locking compound when replacing these bolts. Easy to round out with the wrong tool. See correct tool below:

$22.50

Kent's Favorite Big Wrench

Especially for driveline center nuts and testing brake calipers

There are times when you need a big wrench - and this is the one Kent has used the most over the years. 16 inch curved joint plier does the job when needed! There are many places you can use this when you really need some squeezing power, but it also can work to get on big nuts in tight places.

123 Drivers L.H. Door Striker Plate
$28.95

123 Drivers side L.H. Door Striker Plate

FITS THE FOLLOWING: all 123 chassis sedans and wagons from 1977 to 1985.

This is a drivers side Front OR rear door striker plate. We also offer this item in a full kit with instructions, bolts and special tool. Look below to order the complete kit.

Gas and Diesel Fuel Hose Clamp Off Tools
$9.95
Currently out of stock.

Gas and Diesel Fuel Hose Clamp Off Tools

Applies to all Mercedes: Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201 and 124 chassis. If you ever need to replace a fuel tank, fuel pump, fuel filter, or fuel hose and don't want the fuel running down your arm here is the tool and will save the day!

Early 107 and All 116 Chassis Driveline Center Support Overhaul Kit
$62.95

Early 107 and All 116 Chassis Driveline Center Support Overhaul Kit

For 1973 to 1985 280S 280SE 300SD 350SE 450SE 450SEL 450SL 450SLC 380SL 380SLC

I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.

$22.95
Currently out of stock.

6" Digital Caliper Metric and SAE

A must have when rebuilding diesel fuel injectors

 If you work around your Mercedes much this is a great tool to have. The quality is exceptional for the price. It will reset to measure in both inches and millimeters. A Must Have for Ajusting Diesel Fuel Injectors 190D 200D 220D 240D 300D 300CD 300TD 300SD

$32.50

Late OM616 OM617 Power Steering Pump Leak Reseal Kit - SMALL SEAL

Fits later W123 4 and 5 cylinder diesels and W126 300SD with aluminum pumps ( watch video before ordering!!!)

For later 240D 300D 300CD 300TD 300SD Models. Most after 1980 BUT YOU MUST LOOK AT YOUR PUMP BEFORE ORDERING! WATCH KENT'S VIDEO BELOW. You have asked for it and we have delivered again.

$39.80

Early OM616 OM617 Power Steering Pump Leak Reseal Kit - LARGE SEAL

Fits early W123 4 and 5 cylinder non-turbo diesels and W116 300SD with cast iron pumps ( watch video before ordering!!!)

The seal in this kit is out of production. Only small quantity left. For EARLY 240D 300D 300CD 300TD and W116 300SD Models. Usually up to 1980 BUT YOU MUST LOOK AT YOUR PUMP BEFORE ORDERING! WATCH KENT'S VIDEO BELOW. You have asked for it and we have delivered again.

$19.95

60x Injection Pump Stop Lever Shaft Leak Fix Repair KIT

For 5 and 6 cylinder diesels 1986 to 1995

This is one of the more common oil leaks I see on the 602 (5 cylinder) and 603 (6 cylinder) diesel engines. In fact, I have seen it on almost every one of these engines I have worked on.

$325.00

4 Cyl 220D 240D 190D DIY Fuel Injector Rebuild Kit

German Monark Nozzles are Back! Limited supply. We will include these when purchasing this DIY rebuild kit.

NEW Version 3 - Improved fluid handling design - Watch the video below for reasons behind the changes. If you have been reluctant to overhaul your worn our diesel fuel injectors because the job is too difficult or too costly then think again!

$136.50

116 and 126 Chassis 300SD Rear Axle Rubber Boot Removal and Replacement Kit

DIESELS ONLY! WARNING: This is kit will only work on the ORIGINAL FACTORY AXLES THAT CAME ON THE CAR!

WARNING: We are finding that people are replacing axles from other models that have different size boots. This kit will ONLY replace boots on ORIGINAL AXLES!! BOOTS PROVIDED IN THIS KIT FOR INNER AND OUTER ARE THE SAME SIZE. AXLE END I.D. is approx 7/8". CAN END OF BOOT I.D.

$179.50

Diesel Fuel Injector Balance Pressure Tester - Yes, You Can Do It Yourself!

NEW Version 3 release - Improved fluid handling design - Watch the video below for reasons behind the changes.

For all MBZ diesel engines 1950 to 1993. Designed by Kent Bergsma. These are built at Mercedessource to control quality and production demands. Each one is tested here in our shop before shipping.

$69.95

Service: Vacuum Hand Pump Testing Kit w/ Extras

A MUST HAVE For testing all older Mercedes using vacuum controls for doors, engine, transmission, climate control, etc.

We supply a number of extras in this kit including some special rubber and plastic hose that you will not find with other vacuum hand pump testers.

$352.00

5 Cyl 617 Diesel Engine Fuel Injector DIY Rebuild Kit

German Monark Nozzles are Back! Limited supply. We will include these when purchasing this DIY rebuild kit. For 300D 300CD 300TD 300SD 1975 to 1985

NEW Version 3 - Improved fluid handling design - Watch the video below for reasons behind the changes. If you have been reluctant to overhaul your worn our diesel fuel injectors because the job is too difficult or too costly then think again!

115 Short bypass hose
$23.50

MERCEDES 115 220D 240D Short Bypass Coolant Hose & Clamps

N.O.S. LAST OF OUR STOCK!

This is the hard to find short bypass coolant hose that goes between the thermostat housing and the water pump housing. This hose is often neglected during routine maintenance because it is not easy to find.

$58.75

Pressure Brake Bleeder

Will work on all Mercedes from 1968 to 1995 - Also select 1960's models and most later chassis up to 2006 see list below

25-minute video instructions are now included. Our pressure bleeder is modified and put together here in our shop. We take a specialized pump sprayer and add a reliable pressure gauge and a modified cap that will screw on the top of your master cylinder reservoir.

$295.00
Currently out of stock.

201 124 126 Chassis 103 Engine Ultimate Tune-up Kit

Fits 124, 126 and 201 chassis - 124 Chassis 300E 2.6, 260E, 300E, 1986-1992, 300TE 1988-1991, 126 Chassis 300SE, 300SEL, 1988-1991, 201 Chassis 190E 2.6, 1987-1993.

 As these popular six cylinder engines age we are finding they need more than just a set of plugs and normal tune up. To run smoothly and produce the power they had when new, they really need our ULTIMATE tune up kit and instructions.

$37.95

116 123 126 Chassis Fuel Tank Outlet Screen Removal Socket

WORKDS ON FUEL TANK SENDING UNITS TOO! Machined short for easier access and a sharper edge for better grip

FITS all 116 123 Diesel and Gasoline,  and 126 chassis from 1977 to 1985. Finally a socket to remove your fuel tank screen that really works. Most correct size sockets tend to be SO BIG that they require 3/4 inch drive ratchets and extensions to use them. Who has those in their tool box??

$24.65

W201 W124 Front Shock Strut Top Nut Special Wrench

When replacing the front struts ( shock absorbers ) on a W201 W124 or W129 chassis it is frustrating and time consumming trying to remove and replace the big 22 mm top nut on the front struts ( shocks ).

$2.80

Windshield Washer Squirt Nozzle Cleaning and Adjusting Tools

2 wire tool set - One to clean and one to adjust - watch video below for details

Are you tired of windshield washers sprayers that done spray straight or don't spray at all. If you can hear the pump running but no fluid is coming out the nozzles it could be the nozzle holes are plugged with dirt.

$12.95

HD Diesel Engine Glow Plug Circuit Tester

Every diesel owner should have one of these in the trunk to quickly test glow plug functions

A 12 volt test light is a very handy tool to have when working on any car but it is particularly important if you have a old diesel. This tool will allow you to quickly determine if there is power getting to your glow plugs, and if not where the power is breaking down.

Pages