Search | MercedesSource Kits | Driveline and rear end

Displaying 1 - 14 of 14
$165.00

116 123 126 5 cylinder TURBO DIESEL Driveline Flex Disk Kit

FITS THE FOLLOWING All 116, 123 and 126 chassis diesel cars with 5 cyl. turbo engines. This includes 1982 to 1985 300D, 1982 to 1985 300CD, 1981 to 1985 300TD and 1978 to 1980 300SD / 1981 to 1985 300SD. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT

123 Front/Rear Driveline Flex Disc Kit (NON TURBO) new
$135.00

115 123 220D 240D 300D NON TURBO Driveline Flex Disk Kit

FITS ALL 115 220D 240D 300D and 123 240D 300CD 300D 300TD with NON TURBO engines. THIS IS AN IMPORTANT MERCEDESSOURCE MAINTENANCE ALERT! In previous years I have had a number of Mercedes diesels come in to my shop with severe damage due to total drive line flex disk failure.

107 Tie rod kit
$94.50

113 108 109 114 115 Early 107 Front Steering Tie Rod Replacement Kit

Fits many models from early 1960s up the late 1970's - see list below

All 280SL 450SL 380SL 1972 to 1985. All 230SL 250SL 280SL. All 108 and 109 Sedan from 1965 to 1973 including 280SE/L 5.4 and 300SEL 3.5 and 4.5. All 114 and 115 sedans and coupes from 1968 to 1976 including 220D 240D and 300D. We are now offering a kit with 2 new tie rods.

$32.50

All Chassis 1968 to 1991 Front Steering Idler Arm Repair Kit

Next to bad steering gear box this is number one cause of steering looseness

FITS THE FOLLOWING: All Mercedes Chassis 111 113 108 109 107 114 115 116 123 126 from 1968 to 1991 (not applicable for 201 or 124 chassis). This is a very common wear problem on most older Mercedes.

Sale
$78.50

Late 126 Chassis Rear Subframe Mount Kit

Fits 420SEL 300SDL 300SE 300SEL 350SD 350SDL 560SEC 560SEL

Brand new rear Subframe mount kit made by Meyle, for 126 Chassis from 1986 to 1991, models listed above. No detailed instructions but here are some installation tips.

$74.00

126 Chassis Rear Subframe Mount Kit w/ Instructions

Early 126 Chassis Gasoline and Diesel models ONLY - up to 1985 ONLY

New Meyle heavy duty subframe mounts will eliminate rear-end wiggle and sway typical on these older chassis. No specific instructions are included but we do offer these tips for successful installation. A small tube of silicone grease and brush applicator are included at no extra charge.

123 rear subframe mount kit
$78.50

123 Chassis Coupe Sedan Rear Subframe Mount kit with Instructions

All 300D 300CD 280E 280CE 1977 to 1985 - 240D vin specific see below - 300TD wagon see notes at bottom of page

Rear Subframe Mount Kit with rubber bushings for both sides complete with mounting hardware as shown. If your Mercedes rear-end is moving around, out of alignment, or sagging slightly, then your forward trailing arm attach point rubber mounts ( bushing )may be worn out or collapsed.

Early 107 and All 116 Chassis Driveline Center Support Overhaul Kit
$66.50

Early 107 and All 116 Chassis Driveline Center Support Overhaul Kit

For 1973 to 1985 280S 280SE 300SD 350SE 450SE 450SEL 450SL 450SLC 380SL 380SLC

I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.

$39.99

Mercedes 1965 to 1995 Front Wheel Bearing D.I.Y. Installation Kit

Front wheel bearings are one of the most neglected maintenance items on older Mercedes

Wheel bearing maintenance and service should not be neglected. If you are hearing strange rumbling noises up front while driving you should check your wheel bearings. Replacing them is not a diffiuclt D.I.Y. job if you have the right knowledge and tools.

$96.00

Late 126 Chassis Front Wheel Bearing Complete Kit

Now for both wheels with free high performance grease included. 1985 300SD with ABS, 380SE, 300SDL, 350SDL/L, 300SE/L, 420SEL, 560SEL, 560SEC

If you need everything for your front hub bearing replacement then this is the best deal. This kit is for BOTH SIDES. Comes with inner and outer wheel bearings, seal, cap, AND ground clip. Fits models listed above only ( with ABS).

$145.00

Most R107 W116 and W126 Complete Rear Axle Rubber Boot Replacement Kit

This is kit will only work on the ORIGINAL FACTORY AXLES THAT CAME ON THE SL AND BIG S CLASS CARS! Be sure to watch the video below to determine if this kit will work for you!

WARNING: We are finding that people are replacing axles from other models that have different size boots. This kit will ONLY replace boots on ORIGINAL AXLES!! BOOTS PROVIDED IN THIS KIT FOR INNER AND OUTER ARE THE SAME SIZE. AXLE END I.D. is approx 7/8". CAN END OF BOOT I.D.

$62.75

R107 W114 W115 Front UPPER Control Arm Inner Bushing Repair Kit

BOTH SIDES INCLUDED (Right AND Left). This is a very common wear suspension part on the front end causing loose steering.

This is a great kit for your 350SL, 450SL, 450SLC, 380SLC, 380SL, and 560SL  from 1972 to 1989. It also fits all W114 and W115 Sedans and Couple both gas and diesel from 1968 to 1976. Brand new UPPER control arm inner bushing repair kit.

Rear Control Arm Set
$239.00

201 124 Chassis Rear End Control Arm Link Overhaul Kit - made by Meyle

For rear suspension on 190E 190D 260E 300E 300CE 300TE etc.

The Mercedes Multi-Link rear end is a marvel of engineering and works extremely well, but when one or more of the link bushings wear out, your car will start steering on its own! In severe cases when applying rapid power it may act like it wants to change lanes on you.

$67.95

Early 126 Chassis Driveline Center Support Overhaul Kit

For 1981 to 1985 300SD 380SE 380SEC 380SEL 500SEC 500SEL

I have been discovering this is one of those maintenance areas that suffers from severe neglect. Failure of the rubber support or center drive shaft bearing can cause all types of improperly diagnosed vibration problems - some commonly change with vehicle speed.