W126 Suspension Guide Rod Mount Bracket FRONT Rubber Bushing

Store > W126 > Suspension Products
Mounts into front end of the aluminum bearing bracket ( see location image below)

This rubber part fits all W126 sedans and SEC coupes from 1980 to 1991. Since these cars are now 25 + years old most of the rubber in the front suspension will need to be changed if you want the Mercedes "ride and feel."  This part and the rear end bracket bushing as well ( see related products below) should be replaced anytime you are working on the front suspension, especially if you are replacing the guide rod mount bushings. See the image below for specific location.  It is # 16

W126 Suspension Guide Rod Mount Bracket FRONT Rubber Bushing
$28.95
SKU:
SRS-126FGRMBUSHING

Product Details

This is only ONE SIDE. You will need to order two of these bushings if you are redoing both sides of your front end. These bushings do not come with specific instructions, but Kent's instructions on replacing the guide rod mount bushings will at least show you how to get the bracket off. If you do not have the tools then you may need to take the bracket and the bushings into a machine shop to have them replaced with a press. 

Related Products:

Sale
126 left upper control arm
$60.00

126 Chassis Left (Drivers side) Front Suspension Upper Control Arm

For all W126 sedans and coupes 1981 to 1991

This is a very common wear item on high mileage 126 chassis. It will start out as a clunking noise when you go over rough ground. When real bad it will be hard to get your car to track right down the road  (it will want to wander) and you will experience rapid and uneven tire wear..

126 right upper control arm
$68.95
Currently out of stock.

126 Chassis Right (Passenger side) Front Suspension Upper Control Arm

Fits all W126 sedans and coupes 1981 to 1991

This is a common wear item on high mileage 126 chassis. It will start out as a clunking noise when you go over rough ground. When real bad it will be hard to get your car to track right down the road  (it will want to wander) and you will experience uneven and rapid tire wear.

$129.50

126 Brake Control Rod Ball Joint Bushing Kit (Guide Rod Mounts x 2)

#1 Front suspension wear point on ALL 126 Chassis from 1981 to 1991

PLEASE READ THE ALERT BELOW BEFORE ORDERING. If your 126 sedan or SEC coupe is making front end clunking noises when you brake or go over bumps at slow speed you most likely need to replace the bushings where the lower front suspension guide rod attaches to a body subframe casting.