This tester is specific to K-Jetronic V8 engines due to the special fittings and adapters it includes. The tester itself may work with other Bosch CIS fuel injection systems, but the included fittings to attach the hoses to the engine will most likely not work. Kent believes strongly in doing the tests with the engine NOT running, so he has developed two special jumper leads to allow you to do just that..
Product Details
The kit includes the following:
- CIS fuel injection tester with a multi-function shut-off valve
- Correct fittings to attach to the fuel distributor and the WUR
- Jumper leads to run the fuel pump with the engine off
- Jumper leads to heat the WUR without running the engine
- Thin 14mm wrench for attaching the tester fittings
- Gloves
- Video instructions
The included video instructions will cover hooking up the tester, running the tests, theory of operation, adjusting the warm-up regulator, and other resources Kent recommends to help you repair the problems you may discover.
Related Products:
M110 6-Cylinder Fuel Injection Pressure Tester with Instructions
Why do a fuel system flow and pressure test? Without one, you will not know if your fuel injection is working properly. This is even more pronounced on K-Jetronic engines that incorporate a warm-up regulator. And guess where that is located on the M110 engine?
1970 to 1975 3.5 4.5 D-Jetronic Fuel Injection Pressure Tester w/ Video Instructions
Testing fuel pressure is a simple procedure on the D-Jetronic engines, but it is ABSOLUTELY essential. If your fuel pressure is off even a few pounds, it will dramatically change the fuel mixture, and your engine will end up running too rich or too lean.