114, New Parts Kits and Manuals

This small rubber cap protects dirt from entering your level indicator on your brake fluid reservoir. Fits 107 114 115 116 123 126 201 and 124 models from the early 70s to mid 1990s.

This large size rubber grommet is a common leak area at the bottom of your brake fluid reservoir. Fits all 107 chassis, 114 and 115 chassis, 116 chassis and 123 chassis from 1972 to 1985.

• Type M 115 - 4 Cylinder Gas Engine
• Engine spare parts list
• Production date May 1971
• Edition C
• 202 pages

COVERS ALL ENGINE PARTS WITH MERCEDES PARTS NUMBERS. GOOD USED CLEAN ORIGINAL CONDITION

• Type M 180 - 6 cylinder Carburator Gas Engine
• Engine spare parts list
• Edition D
• Production date October 1971
• 180 pages

COVERS ALL ENGINE PARTS WITH MERCEDES PARTS NUMBERS. GOOD USED CLEAN ORIGINAL CONDITION

• Type M 130 V - 6 cylinder carburetor Gas Engine
• Carburetor Engine
• Engine Spare Parts List
• Edition C
• 196 Pages
• Production date December 1971 

COVERS ALL ENGINE PARTS WITH MERCEDES PARTS NUMBERS. GOOD USED CLEAN ORIGINAL CONDITION

• Type M121 - 4 CYLINDER GAS ENGINE
• Engine Spare Parts List
• Edition D
• 222 Pages 

COVERS ALL ENGINE PARTS WITH MERCEDES PARTS NUMBERS. GOOD USED CLEAN ORIGINAL CONDITION

I have used a LOT of different kinds of grease in my lifetime - but this is my favorite. It has a high molybdenum and grahite content and does not dry out over time. It also has a great resistance to water and moisture deterioration. Just the right consistency - not too thick so it can get into tight places - not too thin so it stays in place.

On the body I use it in door check straps, window gears and mechanisms, seat tracks, door latch assemblies, sunroof cables and gears, hood and trunk hinges and any other metal to metal wear location. On suspension and chassis I use it on wheel bearings, ball joints, tie rods, u-joints, backing plates and more.

This 14 oz can is usually more than enough to service most Mercedes Benz. A must have in your tool box!

FITS THE FOLLOWING: all 107, 108, 109, 111, 113, 114, 115, 116, 123 and 126 chassis from 1969 to 1991. Four pads included for both sides of rear axle. Tired of sqweeking or squealing or hard brake pedal feel? These are just amazing brake pads. Manufactured by Meyle in Germany these have high quality anti-squeal plates built into the back side of each pad and are scorched at the factory for more driving comfort. What does scorched mean? Let  me explain:

This is a must have for any owner of an older Mercedes gas engine model. This applies to all 4, 6 and 8 cylinder from the mid 1950s to the mid 1980s. The manual covers prevention of thread damage and how to repair a totally destroyed spark plug hole. The thread chaser included with the manual with help clean up any minor damage and prevent major problems. Never force a spark plug into the threads and if a plug comes out hard the threads MUST be cleaned with a chaser before you reinstall a new plug.

Fits all Mercedes Diesels that use the 90 degree fuel prefilter. This prefilter is made by Hebmueller of Germany and is excellent quality. It has brass inserts in the ends so they cannot collapse or crack when the fuel hose clamps are tightened down. Now sold individually! If you want more than one, just change your quantity in the shopping cart. We also sell these in a six pack for a better price break.

Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can. This injection cleaner is run directly through the fuel system in the engine compartment. It is not a fuel tank additive. Does not include instructions or bypass hose. If you want more than one can just change your quantity in the shopping cart.

Lubro Moly Diesel hi test fuel additive. Formulated for the new low sulfur diesel fuel. Contains an additive against injection pump and injector wear. Keeps the injection system clean. Provides clean, low smoke combustion. Regular use guarantees lowest exhaust emission levels. If you are running petrol diesel it is a must to be using a fuel additive in the older Mercedes diesels. Sold per can, treats 20 gallons.

These are the zip ties we have all been looking for. They have a super sticky tape of the foot of the tie so you can stick them anywhere in your engine compartment without having to drill a hole in the inner fender panel. (NOTE: Be sure to thoroughly clean the surface BEFORE installing). The other neat thing is that these zip ties can be loosened back up (just like the factory type) to remove the wire bundle or anything else you need to secure. Sold in packs of 6. You will love these!

This new shift knob fits all 4 speed diesel transmissions from 1969 to 1983. It is a german aftermarket replacement that is made out of hard plastic rather than rubber, so it will not deteriorate like the original style. Good quality at a good price!

Brand new Genuine OEM silver wheel center cap. Make those wheels look beautiful again! Fits all 14 inch alloys on 107 116 114 115 123 and 126 chassis
to 1985 with the bundtcake style wheels. If you need more than one, just change your quantity in the cart!

This is the tool I love to use when troubleshooting engine operating temperature problems. You can stand back and aim the beam right on a spot on the radiator or engine to get an exact temperature reading. This can indicate whether or not your radiator is plugged and confirm if your temperature gauge is accurate or not.

If you are running SVO it can give you accurate readings of the temperature of your oil - both during filtering and coming out of your boost heater.

Features:

Fits all these chassis from 1968 to 1985. For drain bolt on automatic transmission torque converter. For a complete transmission flush the torque converter must be drained separately. Good to have a new aluminum sealing washer on hand during the service. 

If you have read very many of my manuals and instructions you already know how much I detest Silicone Gasket Sealant. I know there are places for silicone (ie bath tub caulking, etc), but it should not be used on internal combustion engines!

FITS THE FOLLOWING: 108, 109, 114, 115, 107, 116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985. Includes one Genuine OEM Mercedes front rubber seal. No instructions included.

Please note: You only need to open the  sunroof to change this seal. It can be a little tricky to get the new seal in the groove. No instructions included with this seal. It is intended for those who have already done the job. If you need instructions then I recommend you purchase our complete seal kit.

FITS THE FOLLOWING: 108, 109, 114, 115, 107, 116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985. Includes one quality german aftermarket rear rubber seal. No instructions included.

Applies to all Mercedes, PON FIN Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201, and 124 chassis. Here is a kit you will love to have around the shop. If you don't like using those poor quality US hose clamps (the kind that cut into the hose) then here is a chance to have spare quality (no nick) hose clamps for those fuel and coolant related repairs. Kit comes with  large size hose clamp. Hose clamp size is 32-50/9.

Applies to all Mercedes, PON FIN Pre 1960, 190SL, 110, 111, 112, 113, 114, 115, 108, 109, 107, 116, 123, 126, 201, and 124 chassis. Here is a kit you will love to have around the shop. If you don't like using those poor quality US hose clamps (the kind that cut into the hose) then here is a chance to have spare quality (no nick) hose clamps for those fuel and coolant related repairs. Kit comes with 10 medium size hose clamp. Hose clamp size is 16-27/9.

These rubber end plugs can be used to cap off your vacuum on the end of a line or on certain components. FOR USE ON VACUUM SYSTEM ONLY. These are NOT to be used on fuel injectors.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a L shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings or hose were swollen and would just not stay connected? Here is some extra vacuum hose to fix your problem. Fits 115, 116, 123, and 126 chassis.

ONE meter cut piece.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a Y shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a + shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a U shaped fitting that fits 115, 116, 123, and 126 chassis.

CLICK HERE to view the Vacuum Connector Service Kit.