115, USED Diesel Engine

This alternator mounting bracket fits early 115 123 240D and 300D with non-turbo engines up. If you are having a hard time adjusting the belt tension it is usually due to striped teeth on the adjusting bolt head or on the groove in the bracket. This used bracket is fully functional and only has slight wear on the teeth. If you also need the bolt we carry these new. Email us.

This alternator mounting bracket fits early 115 123 240D and 300D with non-turbo engines up. If you are having a hard time adjusting the belt tension it is usually due to striped teeth on the adjusting bolt head or on the groove in the bracket. This unit if fully functional and only has slight wear

Good Used BEHR German fan clutch replacement for 113,111, 108 and 109 chassis gas engines from 1968 to 1973, all 114 and 115 gas and diesel, all 123 gas and diesel engines 1977 to 1983 and 1981 to 1983 126 300SD. PLEASE NOTE: This clutch is for engines that have the 5 blade aluminum metal fans. If you have the newer multi-blade nylon fan then you will need a different type. This clutch lists new for $272.00. If your fan clutch is loose, making noise, or your engine is overheating this is your chance to replace it for a very good price. We also carry these new for $178.00

I have aluminum fan blades used if you need that also. Email for price.

PLEASE NOTE: This will not fit 107, 116, or 126 V8 gas engines.

In working on many 61x series diesel engines, I have often found one or more of these clamps missing. Missing or loose clamps is the number one reason for injector hard line crack failure. There should be a clamp like this between each two hard lines to minimize vibration fatigue failure. 2 used clamps are included with correct bolts and nuts.

Good used steel mesh air filter for 1972 to 1976 220D and 240D

Good used fan clutch. Fits all models that use the 5 blade aluminum fan. Will not work with the multi-blade nylon fans.

Good used adjusting adjusting/mount plate for alternator belt tension. Does have some marks but teeth are in very good condition.  No cracks. Fits 1968 to 1980 220D 240D 300D CD TD (non turbo).

Good used adjusting bolt for alternator belt tension. Does have some marks but teeth are still intact. Fits 1968 to 1980 220D 240D 300D CD TD (non turbo).

Excellent used oil pump. Inspected and cleaned. No major scoring of gears or housing. If you are overhauling your engine be sure to take a good close look at your oil pump gears. Fits all 300D 300CD 300TD non-turbo from 1975 to 1981.

Good used original factory cleanable air filter screen assembly. Fits 1974-1976, 115 chassis, 240D.

Good used air conditioning idler pulley and bracket. Fits mid '70's to 1979 model diesels with york style air compressors.

Good used front crank bolt and 3 spring washers.

Very good used set of intake and exhaust valves, complete with springs, keepers, rotators, and adjusting nuts. This a complete set that will fit 300D engines from 1975-1979. This will also fit 240D's of the same vintage, you'll just end up with an extra set of valves and hardware.

Brand New Lower oil cooler hose made by Cohline for 1968-1973 220D and 1974-1976 240D. If yours is leaking, replace it now!

SKU: DSL-115LOCH

Good used exhaust manifold with no cracks. Fits 1975 and 1976 115 300D only. Manifold is in excellent used condition. Please note that there is one stud missing but it is not broken off. You will need to use a stud from your existing exhaust manifold.

Average set of used camshaft rockers and mounting towers as shown. These fits all 240D's 1974-1983. These are not in perfect condition. There is very minor scoring starting to show up on the faces, but these are perfectly acceptable to use if you are not expecting to drive your 240D for the next 10-20 years. SKU: DSL-COM4CRA

Excellent used 220D240D up to 1976 only, oil filter housing and metal canister. If your canister and housing have been damaged due to improper oil filter installation, here is your chance to replace your leaking unit now.
SKU: DSL-115OFCH

Good used, non-leaking factory oil cooler. Fits 1974-1976 240D. Excellent thread fittings for oil cooler hoses.
SKU: DSL-115FOCU

Excellent used complete air filter housing and neck, along with good flexible rubber connectors and breather tube fittings as shown in this picture. This is an exceptionally good used unit. SKU: DSL-115AIFH

 

If you are tired of your old, sluggish transmission or your automatic has recently failed and you desire to install a manual 4-speed transmission, this kit will provide you with everything you need to do that. These parts were all removed from a good running and driving 1975 240D that was wrecked in the side front quarter. The parts include those that are pictured which are a 4-speed transmission with shift linkage, the complete pedal assembly and clutch master cylinder, the console mount shifter assembly, the engine to fly wheel bell housing, the fly wheel with all fly wheel mounting bolts, the clutch and pressure plate and the rear transmission mount.

Fits 115 chassis 240D 1973-1976. Excellent used set of intake and exhaust valves along with springs, retaining caps and adjusting nuts. Pan not included. SKU: DSL-115CVSA

115 chassis 240D 1973-1976. Set of good used working glow plugs complete with the original resister wires and ceramic insulation connectors as shown. The nuts are not included. SKU: DSL-115GPWA

115 chassis 240D 1973-1976. Good used fuel filter housing complete with fittings as shown. SKU: DSL-115UFFH

115 chassis 240D 1973-1976. Good used set of coolant heater hoses. The shorter hose exits the water pump houing on the right front side of the engine and the longer hose exits the cylinder head and goes up to the heater valve at the firewall. These are good used factory hoses. SKU: DSL-115U2HH

115 chassis 240D 1973-1976. Good used hard lines that connect to your vacuum pump. One goes up to the brake booster and the other goes over to the intake air filter. SKU: DSL-115VPHL

115 chassis 240D 1973-1976. Good used complete right and left oil cooler line assemblies for 115 240D with automatic transmission. These hard lines are common wear items as they will vibrate and the clamps will cut into them causing severe leaks. Inspect your lines and make sure there are no chafe points if there are you can replace yours with these good used units. SKU: DSL-115ATCL

115 chassis 240D 1973-1976. Good used corrosion free complete thermostat housing assembly as shown. These housing can commonly corrode around the hose connection nipples the hose connection necks causing coolant leaks. So if your housing shows sign of corrosion you can replace it with a good used unit. 115 240D Complete Thermostat Housing Assembly

115 240D Complete Thermostat Housing Assembly (used)

SKU: (INVALID SKU)

115 chassis 240D 1973-1976. Good used injection pump assembly removed from running 1975 240D.

SKU: DSL-115IJCA

GENUINE OEM BACK IN STOCK NEW! Fits 114, 115, and early 123 models to 1979 with star head adjusting bolt. If you are not sure check your alternator before ordering. The head of this bolt typically gets stripped out which makes it nearly impossilbe to properly adjust your alternator belt tension. See our alerts for more information

SKU: DSL-COMEAB

FITS 115 CHASSIS. Good used injection pump removed from a running 1976 300D (115 chassis). This is a complete unit and will only fit 1975 and 1976 300D diesel engines. DE5

SKU: DSL-115INP