116, USED Diesel Engine

Good used original and correct 13 mm hex nuts for top cap of oil filter housing. Sold in set of two.

Good used plastic intake elbow factory clamps. The seal is a little worn and thrown in for free. If you need new rubber seals they are available elsewhere on our website. These clamps fit 116, 123, and 126 chassis from 1978 to 1984 with 5 cylinder turbo diesel engine.

Good Used BEHR German fan clutch replacement for 113,111, 108 and 109 chassis gas engines from 1968 to 1973, all 114 and 115 gas and diesel, all 123 gas and diesel engines 1977 to 1983 and 1981 to 1983 126 300SD. PLEASE NOTE: This clutch is for engines that have the 5 blade aluminum metal fans. If you have the newer multi-blade nylon fan then you will need a different type. This clutch lists new for $272.00. If your fan clutch is loose, making noise, or your engine is overheating this is your chance to replace it for a very good price. We also carry these new for $178.00

I have aluminum fan blades used if you need that also. Email for price.

PLEASE NOTE: This will not fit 107, 116, or 126 V8 gas engines.

In working on many 61x series diesel engines, I have often found one or more of these clamps missing. Missing or loose clamps is the number one reason for injector hard line crack failure. There should be a clamp like this between each two hard lines to minimize vibration fatigue failure. 2 used clamps are included with correct bolts and nuts.

Excellent used oil pump assembly for 617 turbo diesel engines. Pump has been taken apart and inspected for scoring and teeth wear. No adverse wear noted - above average condition

Good used fan clutch. Fits all models that use the 5 blade aluminum fan. Will not work with the multi-blade nylon fans.

NOTE: FOUR bearings only Oiler rod NOT included as shown. Good used complete set of cam tower bearings. Fits all 5 cylinder non turbo engines from 1975 to 1981. Contact us for a great price if you also need a new camshaft or rocker arms.

Good used complete set of cam tower bearings and oiler rod. Fits all 5 cylinder turbo engine from 1978 to 1985. Contact us for a great price if you also need a new camshaft.

Fits all 5 cylinder turbo diesels from 1978 to 1985. Believe it or not these do go bad! If you live in the rust belt (ie salted roads) the lower alternator mounting bolt can actually seize in this bracket. When that happens the only way you will be able to remove your alternator is by cutting the bolt with a saws all and metal blade. Then you will need a replacement bracket like this.

Twin belt alternator pulley in good used condition. If yours is bent this is an opportunity to get a replacement for a resonable price. I only have one of these available. Fits all 5 cylinder turbo models 300D 300CD 300TD and 300SD from 1978 to 1985.

Good used filter assembly and all lines as shown. Note: The rubber cigar hose may or may not be the right length depening on your chassis. So even though included it may not work. All the plastic hard lines are the same and in good condtioin. Fits 1978 to 1985 300SD and 1977 to 1985 300D, 300TD and 300CD.

Note: If you have a pesky leak at the fitler it may be due to a deformed housing or damaged fittings.

Good used set of 5 intake valves and 5 exhaust valves for all 5 cylinder turbo diesels from 1978 to 1985. Comes with vavle springs, valve spring caps, and adjusting nuts as shown. Will need to be resurfaced before installation of course.

Good used 5 cylinder turbo diesel flywheel. Fits all 1978 to 1985 turbo models. Come with good flex plate and flywheel mounting bolts.

Fits 116 123 126 4 and 5 cylinder non turbo and turbo engines 1977 to 1985. Good used set of five special factory stretch bolts that hold the rocker arm towers to the cylinder head. Common damaged item and hard to find new. The 5 bolts here will work with 5 cylinder engines. If you have a 4 cylinder you will just end up with one extra bolt.

Good complete set of star head silver bolts for 617 5 cylinder turbo diesel engines from 1978-1985.

Good used front crank bolt and 3 spring washers.

Excellent used delivery valve (not scored) for top of 5 cyl 617 injection pump. Includes threaded housing, spring, valve body, and valve. A bad delivery valve or valves can cause rough idle, smoke, poor power etc.
SKU: DSL-COM67DV

Fits 116, 123, AND 126 with 5 cylinder turbo diesel engine only. This is a common failure item. The plate can crack and the adjusting bolt often gets damaged beyond repair. Good USED crack free alternator mounting plate with good adjusting mechanism and bolt. The adjusting bolt is often damaged due to lack of understanding how to adjust belt tension.

SKU: DSL-COMAMPB

Fits 116 300SD and 123 chassis 240D 300D 300CD 300TD 1977-1985. Excellent used oil filter housing complete with cap and undamaged threads for both the oil pressure line and the oil cooler lines. You should get the gasket and intstructions with this item.  CLICK HERE.

Removal and replacement of this housing will also be much easier with my special tool for getting the oil cooler lines off.  CLICK HERE.

We also have ones for 126 300SD (1981 to 1985). They have a different cover for the oil pressure sender. Same price. Just let us know via email.