2003 to 2006 SL500 Rear Control Arm to Knuckle Bushing Replacement Kit

Kent calls this the hidden bushing! Always replace these when replacing the rear strut or converting to coil-over shocks.

I call this the hidden and forgotten bushing. Why? Because you can not see it to inspect it, it hardly ever gets changed. When these bushings wear out you will feel "weird" movement in your rear end, especially going over rough ground. If they are real bad, when you accelerate the rear end will try to "steer" the car off track. This is especially true on the ABC cars due to the heavy weight of the rear hydraulic struts. It is a time-consuming job to get to these bushings, but with this tool you will at least be able to quickly remove the old bushings and insert the new ones with the control arm still on the car. Watch the video below as Kent will explain how the tool works. 

2003 to 2006 SL500 Rear Control Arm to Knuckle Bushing Replacement Kit
$126.00
SKU:
SRS-OCABUSHINGKIT
Free Add-Ons Included:

Early R230 ABC Conversion: Installing Your New Rear Coil Over Shocks - On Demand Video

1986 to 2006 Rear Control Arm Outer Bushing Replacement Instructions - On Demand Video

Product Details

Tool configuration when pushing out the old bushing.

Tool configuration when installing the new bushing.

Instructions: You will receive two on-demand instructional videos free of charge. In the long video, Kent will use an SL500 to show you how to drop the control arm to gain access to the bushing. He will show the correct way to reinstall the control arm and load the suspension to tighten and the bolts properly ( please note not every step shown in this SL video will pertain to every chassis).  In the other video he will show you how to use the tool to remove the old bushing and install the new one. 

Related Products: