Early W126 Sedan Grey Center Console Carpet - USED
This is the actual carpet piece you will receive.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
This is the actual carpet piece you will receive.
Good used set of valves for OM617 turbo cylinder heat. Includes all parts as shown (valves, springs, rotators, and spring caps. 10 THIN adjusting nuts INCLUDED. No valve cap nuts. Only parts shown in the picture are the actual items you will receive.
Damage to these is becomming more common as they engines age. If your fuel injectors are not firing fuel properly the ends of the prechambers cac burn right off causing all sorts of "weird" engine performance problems.
Very good used cast iron exhaust manifold as shown. Has been painted but please do not expect paint to hold up to heat over time.
This is a good passenger side right license plate lights as shown. The chrome is very bright. The light bulb holder and lense are in good condtion. Email us if you need the wiring harness.
Good condition as shown.
These have been inspected for good hex heads and for abnormal thread stretch. Threads will need cleaning before installation. Always use liberal blue thread locker when installing.
Kent opened this up to make sure the diaphragm was in good condtion. Check valves appear to be almost new with no oil contamination, so we suspect this is a low time pump or had a kit installed when they were available.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
Very good right lens as shown. Outer plastic lens only. No breaks, lines, or crazing.
Good used working water pump as shown
Study the picture carefully. This is exactly what you will receive. Only one available
Very good condition. Does not have all the corrosion that you see on most of the bulb sockets. If you are have problems with your rear lights staying on this is usually the problem. New bulbs are available separately.
Fits all Mercedes models with the 14" Alloy bundt cake style wheels. The measurements are M12x1.5mm by 51mm overall length. This is a set of five USED wheel bolts that are not all rusty.
Blue in color. Very good condition as shown.
If you need some good rear axle spare parts here is your chance.
This was removed from a vehicle and was tested. ONLY ONE KEY but it is the low-security key so easy to get a duplicate made. Very good key movement, good working electrical switch, and door buzzer switch mounted. Fits Early 107 and later W116 chassis only ( see list in title )
Very hard to find with the pull tab intact for the chrome inside handle. Most are broken off. If this mechanism is all corroded you may not even get your hatch open. This one came out of a very clean wagon with no corrosion and the mechanism operates smoothly. Chrome handle not included.
LOOK closely. What you see is what you get. No glass. Plan for parts only.
Good used bracket as shown.
Wheel wrench as shown. For 17mm head bolts. Original. Only one available.
Excellent used emergency stop lever as shown with good rod bushing. rod spring and C-clip included. Stop decal in good condition.
ONLY ONE SET.
Good used emblems as shown. All pins are in tack.
This unit is located under the approximate middle of the car. A set screw in the arm allows you to adjust the travel of your emergency brake pedal. Often these get very rusty which makes it impossible to adjust and may even bind up and lock your emergency brake shoes.
Hard to find not torn or damaged in some way. These fit on the lips of the front under fender plastic splash guards. No tears or rips - rubber is still soft - good cleaning and sealing with rubber protectant needed.
This is your best option if the lug bolt threads are damaged or stripped out. Good used condition. The bearings look good but I cannot guarantee them.
Good used rocker arm assemblies as shown. This is the actual set you will receive.
This one is a very nice passenger side front side rubber mounting bracket. Not rusty like most you see. The threaded mounting stud is fully in place and has not been broken off by rust. We include the special aluminum mounting spacer and nut for the back side. You will be happy with this one.
This was a good working unit before taken apart. All the internal parts are very usable. This will give you some repair spares for the future.
Good used set of long mounting bolts as shown.
This is a nice one as you can see. I only have two available this nice.
This plate is often corroded and pitted. The locking tabs are usually rusted away. And the original alloy nuts are often rounded off. This is not perfect but way better than most. The metal gasket which you can not buy new is in usable condition.
Only one is available as shown. Good used condition with only very slight scoring ( no deep gouges ) on the aluminum sections. Good impeller with no broken vanes. If you need a reseal kit see related products below:
This is a selection of used parts removed from A 1952 220 Sedan. Some would also fit the W187 coupes and convertibles. No specific description will be given on each part. There is no guarantee that all the parts will fit the described vehicle (mistakes can happen). Study the picture carefully.
This is a selection of used parts mostly removed from a 1958 220S. They should fit most 6 CYLINDER Ponton sedans. No specific description will be given on each part. There is no guarantee that all the parts will fit the described vehicle (mistakes can happen). Study the picture carefully.
This is a selection of used parts removed from a 1972 280SE sedan. No specific description will be given for each part. There is no guarantee that all the parts will fit the described vehicle (mistakes can happen). Study the picture carefully. What you see is exactly what you will receive.
This price is for TWO nuts as shown. If you find you can not accurately adjust one of your older diesel engine valve clearances it usually means the threads on the lower adjusting nut are stripped. New ones are getting harder to find so we are offering good used as an alternative.
Good used motor mount arms as shown. Good bolt threads. No galling or cross threading. Only one set is available. Will need some cleaning when you get them.
THIS ONLY FITS FIVE CYLINDER ENGINES! This is for number FIVE cylinder on the five-cylinder turbo and non-turbo engines. No leaks. It may need to be straightened slightly for installation.
This is for number FOUR cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for number THREE cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for number TWO cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
This is for the number one cylinder on the four and five-cylinder engines. No leaks. It may need to be straightened slightly for installation.
GOOD used housing as shown. Does not include the lid.
This is for passenger side. It will fit the driver side but you will not have the wire for the seat belt buzzer. Make sure this will fit your style shoulder harness. SEE PICTURE.
I save this for someone who might have a 1980 300SD and does not have the sticker for the vacuum hose routing. I thought someone out there might want this... :-)
Good used shield and 2 bolts as shown.