W201, BENZ AID - COMMON QUESTIONS AND ANSWERS

1969 280s w108 wont start

hello
I bought a 69 280s (second owner from new)1 year ago.It needs a full restoration so I started a mechanical restoration.The car was in storage for 5 yrs,and had not been started.I replaced all fluids and filters,had the carbs rebuilt,drained and power washed the gastank,replaced all ruber hose and lines,added new bosh platinum plugs,replaced fuel filters,overhauled the mechanical fuel pump,changed the points,ballast resistor,and ignition cables,cleaned and refitted the distributer cap and rotor,after all this the car only starts when gas is poured in the carbs and dies.I have poured fresh gas(87 octane)in the tank and some fuel stabeizer,poured a can of carb cleaner in the two zeniths, Replaced the fuel filters,

Chassis Model Number

W108 W109

Forums

Body and Interior Specific Aid

Painting of 1979 300 SD

I am in the process of having the car painted in another country and would like to inquire if you would recommend the one stage or the two stage process. Because I am buying the paint, how many quarts do you think I will need, using urethane medium reducer, plus activator. The paint being used is called Val-Spar. The 1979 300 SD originally used a one stage process and the vehicle will be striped of all chrome hand sanded as there is no body work to be done and the original paint is just starting to form small check marks due to the aging. Thank You

Chassis Model Number

W116

Forums

Body and Interior Specific Aid

84 300D Towed 2 miles - trans wont shift?

I just towed my 1984 300 Turbodiesel about 2 miles at 20 mph without the engine running - After I got the engine started again, the car would not shift into 2nd gear. Does it ruin a transmission to tow a model 123 without the engine running? It has been very cold out (7 degrees F) and perhaps something inside the transmission is stuck. Anybody with any ideas on what might be going on with this transmission after being towed for that distance and speed?
-Levon-

Chassis Model Number

W123

Forums

Body and Interior Specific Aid

1981 300SD Oil in alda line

I was troubleshooting my 300SD for low startup torque (I have already adjusted the valves, rebuilt the injectors, etc) then I went to the alda. I removed the banjo bolt from behind the turbo but it wasn't all that dirty. Then I removed the bolt from the side of my alda and engine oil started dripping out. I don't know much about this thing but I don't think this is right.

I saw one of these for sale on this site. Is this something a shadetree mechanic can change?

Chassis Model Number

W123

Forums

Diesel Engine Specific Aid

1984 300sd engine keeps running.

My 1984 300sd will keep running after the key is out of the ignition. I do have a new shutoff valve to replace, but have not gotten to it.

Well, I figured out why the engine cuts off some times before I get the hood up. When I'm getting out of the vehicle I tapped the brake and it killed the engine. I do this with regularity now. Has anybody heard of this? And if so, is it still my "shutoff valve" or a vacuuum booster to the brakes?

Chassis Model Number

W126

Forums

Diesel Engine Specific Aid

Pages