74 240D 115 Battery Tray Removal
how do you remove the battery tray from this vehicle? I can't locate any bolts.
CHECK OUT our new parts and kits for 2007 to 2012 models CLICK HERE to view all.
how do you remove the battery tray from this vehicle? I can't locate any bolts.
Hello everyone,
just wondered what proper compression is for a diesel. I have a 92 300D, and my shop recently did a cold compression test with the following numbers- #1-340, #2-330, #3-290, #4-320, #5-320.
He said that these were pretty good for a car w/ 270k- I just wondered what anyone else thought. The car seems to start fine, and runs well.
Thanks!
I have a 1982 300Sd that I am repairing for my kids to drive. I can hear the wiper motor running but the arms do not move? I know I have read somewhere about a Bakelite piece or something that wears out and it controls the arm movement. IS there a simple modification repair that can be done...AND how do I get to it, and how do I make the repairs.
thnaks
My Benz "Old Yella" had recently slipped a little in the miles per gallon dept. I have developed an obsession with the car and stay right on top of things mechanically so I was a little puzzled. The air filter was coming up on my periodic maintainence schedule so I decided on trying out a K+N. I usually change air filters after about 20,000 miles of use. This figure is flexible as all driving conditions are not the same. Dust, road salt and sand can all gather in the filter and constrict air flow which is essential to internal combustion engines.
kent
1980 240 D standard shift. fresh rebuilt engine. clutch..driveline brakes..etc. pleasure to drive. runs great.
if ive narrowed down vac leak at vacume switch on ignition lock will your manual on removal of ignition lock be the right thing,do i need to remove it or can it rotate to get at vac switch screws? this is an 85 300d
Why is there the warning for the Monark diesel injectors that they not be mixed with Bosch injectors?
Thanks!
I am contemplating swapping a 300SDL engine/auto trans into a 4WD Jeep Cherokee. I'm curious if anyone out there has attempted this swap, and if so what decision was made with respect to the transmission/transfer case?