W110 W111 W112 Sedan, BENZ AID - COMMON QUESTIONS AND ANSWERS

Getting WVO From Outside Drums

I am seriously considering getting one of Kent's dual tank kits for WVO. I have found two good sources for WVO that put out about 60 gallons a week each into outside drums or a large dumpster kind of thing. The oil looks okay and I can see through it in a sampling jar. I am still letting it settle out. My question is about the exposed dumpster and drums. It could get all kinds of things in it. Sometimes the lids are part off. Is this okay as long as you let it settle for 3 weeks and then filter it carefully? Bill Brewer Tehachapi, CA

Forums

SVO Fuel Conversion Specific Aid

Diesel "wobble" & groaning turning right

I have a 1984 300SD & it has developed a "groaning" sound when I turn right. I jacked it up & with the car running turned the wheel, no sound (most likely because it does not have the weight on it). I grabbed the tire I turned the tire hard manually & got a little noise from what I believe to be the "Guide Joint" on the top of the Steering knuckle. It looks to be in great shape. Any tips to solving or isolating the problem?

Forums

Body and Interior Specific Aid

Taxonomy upgrade extras

Questions and Answers

Chassis Model Number

W126

Timing 75 300 D

1975 300D 1975 300D Cam shaft removed, injection pump removed. When cam shaft is re installed, Injection pump re-installed, Cam shaft mark lined up with TDC on Crank Shaft Pulley. Injection pump marks Lined for timing. Question: Is there any other timing marks that needs to be in line???? I read somewhere the the Injection Pump (DRive Gear) should be lined up with some yellow Dot on gear, which I can not find any dot on drive gear for injection pump. Sorry for the confusion in last question.

Forums

Body and Interior Specific Aid

Taxonomy upgrade extras

Questions and Answers

Chassis Model Number

W115

Cams to be used in 1979 300D

I currently own a 1979 300D which has a "worn and scorn" cam. The rocker arms near the front are worn also. This engine has the "00" cam installed. I was given a newer cam and rockers by a friends dad. It is the "05" cam which is the newer "hardened" cam with higher lift. Can this cam and rockers be used in my 300D with engine: 617.912 1207. Too the newer cam has the MB Emblem stamped in it along with the 617 05 between the number 3 and 4 cam lobes. Help someone......Kent?

Chassis Model Number

W123

Forums

Diesel Engine Specific Aid

Pages