Search | W126

Buy a lemonhead for ten cents when added to any order including other item(s).

Limit 10 per customer

Excellent used vacuum shutoff valve. Original Mercedes Part. Tested to hold vacuum. Operates and holds and releases vacuum correctly. Includes used gaskets that are still usable, mounting plate and bolts as shown.

-Please note 5 bolts required per engine 

For reasons of hoping to solve fuel filter leak problems Mercedes changed the center bolt design in some 1984 to 1985 model 123 300D 300TD 300CD and 126 300SD. Instead of one o-ring on the bolt they changed it to two orings (as shown iin the picture.

You asked for it so we made it happen. Many of you have been wanting to know what we use for high temp thread sealant (when we don't want to use the permanent epoxy). We don't like thread tape or anything with Teflon in it.

Brand new electric fan motor switch as shown. This fits on the thermostat housing and is set to cycle at 212 degrees F. Fits all 123 models 1977 to 1985 and all 116 and 126 300SD up to 1984 only.

A faulty switch can cause you fan to stay on all the time or not come on at all.

Brand new trailing arm bushing for the rear suspension arms on all 114 115 116 123 and 126 chassis. Sold individually. Four are required to do complete job.

Location of rear end trailing arm bushing on car

For 1986 to 1993 with OM 603 6-cylinder 300D 300TD 300SD 300SDL 350SD and 350SDL. Also fits 1994-1995 S350. This kit includes Kent's new version 3 pressure tester. Watch the first video below to learn more about its key features.

PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.

Brand new Genuine OEM silver wheel center cap. Make those wheels look beautiful again! Fits all 14 inch alloys on 107 116 114 115 123 and 126 chassis to 1985 with the bundtcake style wheels.

In working on many 61x series diesel engines, I have often found one or more of these clamps missing. Missing or loose clamps are the number one reason for injector hardline crack failure. There should be a clamp like this between every two hard lines to minimize vibration fatigue failure.

Fits all these chassis from 1968 to 1985. For drain bolt on automatic transmission torque converter. For a complete transmission flush the torque converter must be drained separately. Good to have a new aluminum sealing washer on hand during the service.

FITS THE FOLLOWING: 108, 109, 114, 115,  116, 123, and 126 (up to 1985). Fits all sedans and coupes from these chassis 1965 to 1985.

When was the last time you knocked one of your vacuum lines off around the oil filter housing, only to discover when you tried to reattached it that the fittings were swollen and would just not stay connected? This is a L shaped fitting that fits 115, 116, 123, and 126 chassis.

This is the diesel copper ring for your oil pan plug. Fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is the wide style oil filler gasket 6cm in diameter and 10mm wide. Fits all 4 and 5 cylinder diesel engines from 1978 to 1985 including the 240D 300SD 300D 300CD and 300TD. ONLY IF YOU ENGINE HAS THE METAL CAP. If it has the plastic black cap you need the narrow style.

This is a brand new egr gasket. Fits all 5 cylinder turbo diesel engines ONLY from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

This is the gasket that goes in the power steering reservoir cap. Fits all 4 and 5 cylinder diesel engines from 1977 to 1985 including the 240D 300SD 300D 300CD and 300TD 300SD

This new water pump housing gasket fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

Recommend you use of non-hardening Permatex as the correct sealant for this gasket.

This chain tensioner gasket is brand new and is fits all 5 cylinder diesel engines from 1978 to 1985 including the 300SD 300D 300CD and 300TD.

Common wear point on high mileage 126 front suspension. This is the bushing that connects the inside end of lower control arm to the subframe on all 126 sedans and SEC couples from 1981 to 1991. This is for one side only. You will need to order 2 if you are replacing both sides.

Before ordering please note which doors for which models these will fit front or rear doors on the following W126 and W124 sedans.  

Good black plastic trim cover. Installs behind chrome door pull. Fits 1981 to 1985 300SD and other 126 sedans.

Good used part, slight play in pin but acceptable. Fits RIGHT side both front and rear doors. Handle is not dropping! No breaks in frame or handle mechanism. GOOD CHROME.