Search | diesel turbo charger

Displaying 1 - 25 of 25
$795.00

1981 to 1984 Garrett T3 Complete Turbo Charger Assembly - Models WITHOUT Trap Oxidizer ONLY

This is what you need if you want to replace your failed KKK turbo charger. Complete with exhaust manifold. For Turbo 300D, 300CD, 300TD and 300SD

Fully working T3 turbo just removed from a 1983 300D. Fully road testing at speed to confirm the condition before removal. No noise, smooth operation, and excellent acceleration. If your KKK turbo is worn out, it may be best to switch to a Garrett T3.

$44.50

617 Turbo Diesel Turbocharger Oil Drain Leak Fix Kit

5 Cylinder Turbo 300D 300CD 300TD and 300SD up through 1984

Want to fix a common leak? If you own a 617 turbo diesel Mercedes I suspect you have already had to deal with oil leaks. It comes with old diesel territory. There is one small common leak on these engines that is annoying at best but a real pain to repair.

PDF
$9.95

617 Garret Turbocharger Boost Pressure Testing and Adjustment

A double-up PDF download

This manual will cover the basics of testing and adjusting boost pressure on the Garrett turbocharger on 1978 to 1984 5 cylinder turbo diesel engines. It will not cover turbo charger removal or repair. Those details are included in my complete turbo charger overhaul kit available separately.

$28.00

617 Turbo Diesel Garret Turbocharger Oiler Outlet Tube ( Used )

Fits all 5 cylinder turbo engines 300D 300TD 300CD 300SD 1978 to 1984

1981 to 1984 5-cylinder turbo diesel engines. Good used turbo charger center section oil system outlet drain pipe tube  as shown. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer.

$9.95

617 Turbo Diesel Turbocharger Oil Drain Tube Seals

For 1978 to 1984 turbo model 300SD 300D 300CD and 300TC

Three seals required to repair oil leaks in the straight oil drain tube going from the bottom of the turbo into the engine oil pan. This kit is intended for those who are rebuilding their turbo and have not changed these seals before.

$4.25

617 5 Cyl Diesel Turbocharger to Intake Manifold Coupling O-rings

5 Cylinder Turbo 300D 300CD 300TD and 300SD up through 1984 (Set of 2)

These large o-rings are used on the aluminum coupling that connects the turbo charger compressor outlet to the intake manifold. Should be changed with removing manifold or replacing turbo.

$12.25

Garrett T3 Turbocharger Compressor Housing Gasket

Fits Garrett Turbo chargers only 1978 to 1987 - 300D 300CD 300TD 300SD and 300SDL

This is the highly specialized paper gasket that seals the center section forward bearing plate to the compressor wheel housing as shown below:

$3.80

617 Turbo Transmission Oil Cooler Line Banjo Washers (Set of 4)

Fit 123 and 123 chassis turbo diesel transmissions 1981 to 1985 Also will work on the banjo bolt for the turbo charger oil feed line.

Common diesel transmission leak source. These aluminum washers fit on each side of the banjo connection where the oil cooler lines bolt to the right and left front side of the transmission case. Fit 300D 300TD 300CD and 300SD with automatic transmissions from 1981 to 1985.

$27.50

617 Diesel Garrett T3 Turbocharger Installation Gasket Set

For all 5 cylinder turbo 300SD 300D 300CD and 300TD 1978 to 1985

Use this gasket kit to install a rebuilt or good used turbo charger on your engine. Does not include exhaust manifold to engine block gasket but you do not need to remove the exhaust manifold to change the turbo. This is a gasket set only. NO INSTRUCTIONS INCLUDED.

$98.50

617 Diesel Garrett T3 Turbocharger Turbine Wheel ( Impeller) and Shaft

For all 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985

New turbo charger turbine shaft and exhaust turbine wheel as shown. This part has been highly balanced and is ready for installation. Make certain your compressor wheel is not bent or damaged as that could throw it out of balance. Comes with new shaft nut.

$378.00

1978 to 1984 OM617 New Assembled Replacement Turbocharger

ALL new parts installed and lubed for you. Some additional assembly required.

ALL NEW PARTS INSTALLED BY US! We assemble and check fit and tolerances. Kent's written instruction manual included. WARNING: Only fits engine with Garrett turbos. Will not work with KKK turbochargers.

$38.25

115 116 123 126 Chassis 5 cylinder Exhaust / Intake Manifold Gasket

Fits 1975 to 1985 300D 300CD 300TD 300SD. Includes correct alloy locking nuts

Fits W115 W116 W123 and W126 5-cylinder both turbo and non-turbo diesel engines from 1975 to 1985. Check yours for staining around the gasket. Also, check nuts for tightness. These symptoms may indicate a leak. This is an important maintenance item.

$49.95

617 Turbocharger Gasket and Seal Installation kit

This is a brand new Elring seal and gasket installation kit for the 617 Turbo diesel turbo charger. Fits 116 Chassis 300SD from 1978-1980, 123 Chassis 300DT and 300TDT from 1981-1985 and 126 chassis from 1981-1985.

$195.00
Currently out of stock.

OM617 Garret T3 Turbocharger Turbine Housing - USED

Very good condition. Fits 1978 to 1984 Turbo 300D 300CD 300TD and 300SD ( not for KKK turbo charger)

Excellent used Garret turbocharger rear turbine housing with good threads and freely moving bolts as shown. Includes waste gate housing with a smooth-operating valve (not stuck). The back cover plate is in place and sealed. Wastegate diaphragm, spring, and cover are NOT INCLUDED.

$49.95

617 Turbocharger Garrett T3 Compressor Wheel

For 1978 to 1985 Turbo Diesel 300D 300TD 300CD 300SD with Garrett Turbo

Brand new balanced compressor wheel as shown. Increase horsepower by installing a new compressor impeller. The sharp clean edges really make a difference in compressor boost output. Most of these old wheels are worn. No instructions included.

$12.85

Liqui Moly Pro-Line Turbocharger Additive

Use when installing new or rebuilt turbochargers - Suitable for all types.
Used for initial filling of new turbochargers to protect against dry running and damage caused by lack of oil after a change in during the running-in phase. Improves the operational reliability of the new turbocharger.
$66.95

Best Grabbing and Clamping Hand Tool Set in The World - Kent’s Collection

3 super custom tools that you will not find anywhere else in the world. All designed by Kent Bergsma

This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes.  He makes each one of these tools right here in his shop.