Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
When “rebuilding” an old Bosch mechanical fuel injector, replacing the nozzle is usually enough get it working again at peak performance. But sometimes you will run into a fuel injector that just won't fire right nor product a correct fan spray pattern.
Door hinge lubrication has to be one of the most neglected maintenance items on the older models. I think part of the problem stems from the fact owners don't know how to do it or don't know how to acquire the proper grease gun to lubricate those special fittings on the door hinges.
NEW quality aftermarket part. Fits late 123 240D 300D 300CD 300TD 1980 to 1985. Use your existing motor
Kent will demonstrate in this 11-minute video how to repair small rust holes in the trunk wells on older Mercedes W116, W123, W126, W124 and W201 chassis. This technique can also be used anywhere you find small non-structural rust holes forming.
In this 32-minute, very detailed video, Kent will show you how you can fix some heavy rust pitting and small rust-out holes in the trunk of your classic Benz. This technique also works on floors and under body panels.
In this video, Kent will show you the tricks of getting the front sunroof seal installed without pulling your hair out. It will require the tool shown that is included with the purchase of the front seal.
We know you will be very happy with the quality of these plastic headlight surrounds!
in this detailed 38-minute video Kent will walk you step-by-step through the procedures of removing the old belts, installing the new belts, and tightening them properly. When changing your V-belts there are other things you should consider replacing as well.
Many of these, especially along the bottom of the hard are hard and brittle and will break when removing the panel. Tilt and twist to remove and install in the holde. Sold in a bag of 24.
WHY does Kent stress doing this yourself - because my shops do not take the time to thoroughly clean and prep the covers for the proper sealant, or they do not use the proper sealant or use quality gaskets, or torque the bolts properly.
If you are working on engine valve cover oil leaks, plan to replace these hoses unless they have been recently (last five years) changed. More often than not, they can not be reused.
In this 6+ minute video, Kent will demonstrate how to locate and cut out 3-inch (approx.) holes in your trunk carpet to allow you to remove the bolts and the wire attached to the top of your ABC strut. Then you can replace it or install coil-over shocks in their place.
Complete set of new ignition wires as shown.
In this 23 minute highly detailed video Kent will show you to reasons why and some of the problems you will run into when you change these hoses on your own D-Jet engine. He will take the new parts and show you how to properly install them using the correct hose clamps, sealants and lubes.
Assortment includes 6 single-element brake and turn signal bulbs, 4 dual-element bulbs for the front marker lights, and 4 small tail light bulbs. Good idea to carry this assortment in the trunk of your car.
This 25 minute video will instruct you on how to replace the fuel injectors in your 1976 to 1980 8-cylinder M117 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
This 33 minute video will instruct you on how to replace the fuel injectors in your 8-cylinder M116 engine safely and efficiently. This is a fairly straightforward job, but there are some pitfalls you will want to avoid.
This is a high-quality ACM aftermarket part. The fan runs smooth and air movement is very strong.
Is your old gas engine running a little rough? There could be lots of reasons for this but if you have good compression, good plugs and wires you might consider replacing your O2 sensor even if your warning light is not showing up. This is an easy DIY job.
This is a great solution to what is sometimes a nagging problem. This heavy duty and flexible and adjustable plastic spacer can be put on the top or bottom radiator to prevent chafing in and area where it might come in contact the the engine or the radiator.
When doing a compression test you must properly seal the inner surface of the pre-chamber with the fuel injector hole adapter. Copper washers work the best for this to ensure a 100 percent seal. Do not use the engine's heat shield washers.
In this video Kent will share some set up tips as well as explain what is in the compression tester and an overview of how it is used.
In this xx-minute long video, Kent will show you how to install our aftermarket power antenna in your 116, 123, or 123 sedan or coupe. Removal of your old antenna is not covered in this on-demand video but it is very straightforward once you remove the inner fender well panel.
In this 28-minute instructional video Kent with show you how to do a compression test on your own Mercedes gas engine and explain how to interpret the results. It is very important you do this procedure BEFORE "throwing" parts at your engine trying to fix a performance problem.
You might be surprised to realize you spark plug holes need cleaning - and yes some REALLY need cleaning! This 5-minute video will demonstrate Kent's method of cleaning the threads in the cylinder.
ONLY ONE SET.
This is one of those severely neglected parts that seem to never get changed. This is the FIRST thing you want to look at when the engine won't start, starts and quits, or misfires on and off. This is a quality German-made aftermarket cap with Genuine Bosch Rotor.
This was a good working unit before taken apart. All the internal parts are very usable. This will give you some repair spares for the future.
Introductory video
Maybe you have even tried this only to have to patch fall on the floor when you walk away... ( it has happened to Kent... :-) ).
2 large style clamps to be used on upper and lower radiator hoses. Use these to replace your thermostat or water pump without having to drain all your coolant out of the radiator. Works on medium size coolant hoses also.
New O.E. filter as shown. See related products for fluid and flushing instructions. This is VERY easy to inspect and change yourself.
This guide will explain how to properly change the fluid and filter in your late 123, 126, 201, 124, late 107 chassis Mercedes as well as early 129 and 140 chassis. This includes model years from 1982 to 1993.
Brand new passenger side rear door power window regulator. Motor not included
Fits the following 126 models:
Only two available at this price. Quality new part made by VDO.
126 Sedan 1981 to 1991 Driver Side Rear Door Window Regulator
Fits the following 126 models: after early vin number noted.
New Fuel tank sending unit o ring. If you need to remove your sending unit to test or clean, it is a good idea to replace o-ring.
Fits 116 107 123 and 126 Chassis from 1977 to 1991.
If your window washer pump is running and the squirter nozzles are not working properly, you may need replace them with new VDO / Siemens parts. There is nothing like seeing where you are going! Sold individually.
Excellent used rear check strap. Can also fit front doors but only has one stop possible as typical on the rears. Fits right or left. No cracks or bends. Complete as shown.
Brand new fog light bulb set as shown.
Brand new Mercedes Benz Drivers side front door inside chrome door pull for all 123 sedans and wagons 1977 to 1985. It is very common for the handle pin to wear out (floppy handle) or cast frame will break.
Good, used, straight, older aluminum factory wheel. Above average condition. No corrosion or major curb lip damage. No gouges. No bolts or center cap included. This is the narrow wheel for smaller-bodied Mercedes 14 x 6 inches. Not for the S and SL classes.
Good used emergency brake shoe adjuster star nut and pin. Fits all models from chassis in title.
New Bremi distributor rotor fits models listed above from 1986 to 1991. Check yours now for heavy burn marks or arcing.
New Bosch distributor cap fits models listed above from 1986 to 1991. Check yours now for cracks or arching.
For all 108, 109, 114, 115, 107, 116, 123, 126, 201, and 124 chassis from 1965 to 1995. I wrote this repair guide to show you how to properly remove your instrument cluster and replace worn or failing components. (NOTE: This is not a detailed manual on how to repair the components.
This OEM thermostat from another engine fits perfectly in the OM617 diesel engine. It does require a special rubber seal, which we include here.
PLEASE NOTE In stock now and ready to ship. No detailed instructions at this time, but it is not a difficult install this unit once you remove the false firewall at the back of the engine. You will be able to gain access to the monovalve and electric pump assembly.
If you have any Mercedes model with hydraulic self leveling suspension from the early 70's up to the early 1990's this is the correct fluid to use. High quality Meyle or Febi Bilstein product. Any other type of fluid can damage the seals and score your pump.
PLEASE NOTE: This item can ONLY be shipped UPS Ground. Diesel purge is amazing stuff! It is getting so popular that we have decided to offer it on the website individually, so now you can buy per can.