W123, Factory Books and Manuals

1984 300D injection pump trouble? please advise

I have a 300D with 250k. recently the car wouldn't start or try to fire up at all until you shut the switch and try a second time and it fires right up. this is a recurring problem but it will always fire right up on the second try. The fuel lines have been replaced a few months ago all the way to the tank and there are no fuel leaks anywhere so I figured the lift pump might be loosing its prime and I tried a little experiment. Before starting up in the morning I used the hand primer pump about 10 strokes and she fired right up first try.

Chassis Model Number

W123

Forums

Diesel Engine Specific Aid

altenator

1933 300D altnator not charging Instaled a new altnator with new voltage relator. Still not charging. What is the little plug with 3 wires coming into a plug and 1 wire pluging into the altnator? Can and should this be replaced/ Wher can I get this box ?

Chassis Model Number

W123

Forums

Diesel Engine Specific Aid

82 300D problem installing rear axels ??

Old axel had enough play to remove. Can't get new axel compressed enough to get into wheel hub (can type). Several Internet articles just said to jack up differential housing. This still does not give enough room. Looks like no way to remove hub without removing lower control arm. Any ideas or tricks to this?

Thanks,

Mike

Chassis Model Number

W123

Forums

Transmission / Suspension Specific Aid

'85 300D heat driver's side cold passenger

Hot air is coming out of the appropriate places on drivers side, but ambient temp air from the passenger side. Buttons on dash change air routing but still temps remain as above. I have the automatic climate control. Both hoses of the monovalve are hot. Any suggestions. Days of internet searching have come up empty. 1985 300 D eurodelivery model 280,000 mi.

Thanks,

Paul Sipe

Chassis Model Number

W123

Forums

Body and Interior Specific Aid

Pages