W123 Wood Face Ash Tray ( Used )
Good used ash tray. Needs cleaning. Excellent zebra wood with no cracks.
Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Good used ash tray. Needs cleaning. Excellent zebra wood with no cracks.
PLEASE READ CAREFULLY BEFORE ORDERING. Good used center dash wood strip. No Cracks with good finish. Slight bow in wood. THEY ALL ARE WARPED SOME DUE TO AGE!!! Missing metal backing.
NOTE: these bulb holders are the round style. They have 2 prongs for single element bulb when used with EUROPEAN headlights. You will need these when converting to Euro Headlights. Make certain your current socket is the same.
Bulb socket round style. Has 3 prongs for US headlights. Make certain your current socket is also round. Good condition, no corrosion.
Here is an assortment of 12 aluminum and copper sealing rings used in different locations on diesel engines and transmissions. This is not a complete set. Random spares from Kents stock. Handy to have in the garage for spares.
Crushable seal ring that fits between the prechamber and the cylinder head. Standard thickness approximately 2.0mm. SOLD INDIVIDUALLY. New seals may be required to repair fuel and air leaks around the top of the prechambers. Special tools are required to replace this seal.
Crushable seal ring that fits between the prechamber and the cylinder head. Genuine first oversize thickness 2.3mm. SOLD INDIVIDUALLY. New seals may be required to repair fuel and air leaks around the top of the prechambers. Special tools are required to replace this seal.
Plastic adjusting knob with clip. Fits many years and models with manually adusting mirrors.
Good used set of reading lights with no corrosion. No breaks in plastic. CAN NOT GUARANTEE THE BULBS
Good used flywheel stretch bolt as shown. Very limited stock. Torque converter flex plate bolts.
Excellent used rear check strap. Can also fit front doors but only has one stop possible as typical on the rears. Fits right or left. No cracks or bends. Complete as shown.
Very Good used wood piece. Hard to find in this condition. For models without sunroofs but can be modified for models with a sunroof by cutting out the trim hole. Wood superb. The finish is almost perfect except for two very small hairline cracks at the lower corners of the big cut-out.
Brand new balanced compressor wheel as shown. Increase horsepower by installing a new compressor impeller. The sharp clean edges really make a difference in compressor boost output. Most of these old wheels are worn. No instructions included.
UPDATE: This yellow slide hammer is no longer available. You can purchase our new silver Version 4 model. See related products below. This is one of the tools you will need to remove stubborn pre chambers.
Tightens and Removes Collar Nuts on 220D 240D 300D 300CD 300TD 300SD 300SDL 190D 2.2 1969 to 1987. Works on most Mercedes diesel engines up through 1987 only. ALSO FITS OM 636
New instrument cluster bulb with socket holder. Sold individually. PLEASE NOTE: This holder is only for the very small warning indicator bulbs, as well as your dash turn signal indicator lights. It is NOT for the larger bulbs that light your dash at night.
Good set of air conditioning compressor mounting bolts that mount the air compression to the engine. These are long special bolts. Sorry no spacers to washers.
Good used water pump double belt drive pulley for OM 617 turbo engines. WARNING: There are different sized pulleys floating around out there. Your engine could have been changed. PLEASE Measure your EXISTING pulley BEFORE ordering.
Getting to and removing the two hex head bolts that hold the starter to the bellhousing can be a real test of your sanity - especially if you don't have the right tool! You will need a heavy duty hex socket on a strong wobble extension.
All 5 cylinder turbo diesels 1978 - 1985 300D 300CD 300TD 300SD.
Good used air conditioning adjuster.
ONLY ONE LEFT. Good used activation rod and plastic clip as shown. Controls travel of vacuum control valve on the top rear of the injection pump. A plastic clip can easily break. May be some slight wear on the end of the metal rod but still usable.
Excellent used black plastic arm rest trim ring. has no breaks
Fits all 123 240D 300D 300CD 300TD 280E 280CE 1977 to 1985. This is a good used rear bumper rubber. There are no gouges or tears, only some slight scratches in places. The rubber trim piece that goes over the bumper shock mounts is in very good used condition.
Fits 450SL 450SLC 450SE/L 380SL 380SE/L 380SEC 500SEL 500SEC 420SEL 560SL 560SEL 560SEC 1973 to 1991 - ALSO FITS 126 Chassis 300SDL 350SDL.
Brand new complete wheel bearing kit. Includes all parts shown for right or left wheel. You with need to order 2 if you want a complete set of wheel bearings for both sides.
DESCRIPTION: Excellent used combination turn signal, high beam and wiper switch assembly. Note no cruse control level included. Easy to install buy pulling wiring bundle right out through the steering column. There will be some wear on the handle.
Excellent used part. Lens has no cracks and no crazing. Good Bright Chrome . No Bulb holder, rubber seal or reflector.
This is a genuine Mercedes used part. These are much stronger than the aftermarket ones available. Genuine are no longer made. No damage to the slot or the threads. Only for models listed. Does not work on later aluminum diesel engines. Collar nut holds pre-chamber in cylinder head.
This is the new Bosch plastic upgrade to replace the old metal style fuel stop solenoid or shutoff valve. This is located on the top rear section of the injection pump (right under the intake manifold). Sorry, no instructions included but it is a straight forward replacement.
These two small o-rings seal the oil drain tube that goes from the bottom of the air filter into the engine oil pan.
8/2022 Update: We have modifed a new wrench for this kit so it may not look the same as that shown in previous YouTube videos, but it will do the same or even better job! We do sell the water pumps individually, but we decided to offer this complete kit to make a diesel pump installation go easie
For 1977 to 1985 240D 300D 300CD 300TD 280E 280CE. When I first saw these from our supplier I was really impressed with the quality. So I decided to put them one of my personal W123s that had faded and crazed Bosch originals. Watch the video below and I think you will be impressed too!
Description: For late 450SL, 450SLC, 450SE, 450SEL as noted below. Fits ALL 300SD 1978 to 1980. Please note that the cruise control lever is not included. You will use that from your old unit. No instructions but easy and straightforward to install.
Mercedes Benz 450SE
FITS: MERCEDES BENZ 190DT, MERCEDES BENZ 260E, MERCEDES BENZ 300CDT, MERCEDES BENZ 300CE, MERCEDES BENZ 300DT, MERCEDES BENZ 300E, MERCEDES BENZ 300SD, MERCEDES BENZ 300SDL, MERCEDES BENZ 300SE, MERCEDES BENZ 300SEL, MERCEDES BENZ 300SL, MERCEDES BENZ 300TD, MERCEDES BENZ 300TDT, MERCEDES BENZ 3
Good used plastic cover for glow relay as shown
Description: For 250S 250SE 280S 280SE 300SE 300SEL for years noted in subtitle. Good used
Good straight used headlight ring
With Screws
Fits upper or lower headlight
For 250S 250SE 280S 280SE 300SE 300SEL for years noted in subtitle. This is an original in super excellent condition. Very good chrome. No pitting and no noticeable dents or damage.
Description: For 220S, 220SE, 300SE, 300SEL, 250S 250SE 280S 280SE 300SE 300SEL for years and chassis noted in subtitle with US style twin vertical sealed beam headlights. Excellent Used above average condition. No dents or cracks. Very bright chrome with no flaking
PLEASE NOTE: We have been having problems recently obtaining these brackets. Turbo owner you may want to get a backup now before these are gone forever. If you order there could be a short shipping delay. Complete Kit as shown with installation tips included.
Good used turbo charger center section heat shield plate as shown. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer.
Good used turbo charger center section to turbine housing hold down ring plate as shown. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer.
Good used turbo charger exhaust manifold with good studs as shown. No other parts included. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer. This is the style that has the EGR outlet.
Good used turbo charger compressor housing as shown. This only fits the Garret T3 Turbo. Will not fit the KKK turbos. Will not fit 1985 models with trap oxidizer.
These large o-rings are used on the aluminum coupling that connects the turbo charger compressor outlet to the intake manifold. Should be changed with removing manifold or replacing turbo.
With this kit you will be able to hook up a pressure gauge to your intake manifold and route it inside your car for the purpose of monitoring your turbo charger boost pressure while driving.
When using a pencil glow plug reamer, this modified 12 mm wrench will allow you to PUSH in on the reamer while turning - and let me tell you - this is needed when you have heavy carbon buildup in the prechambers.
Three seals required to repair oil leaks in the straight oil drain tube going from the bottom of the turbo into the engine oil pan. This kit is intended for those who are rebuilding their turbo and have not changed these seals before.
Quality flexible brake hose sold individually.
High quality lubricant to be used when assembling bearings in engines or in components that are oiled by engine oil. This WILL prevent scoring and wear upon initial start-up after overhaul.