Search | Garrett T3

Displaying 1 - 20 of 20
Sale
$182.00

Magnetic Induction Heater 110v 1Kw w/ Three Coils Included to Attack Stuck Fasteners

If you want miracles to happen with frozen rusty nuts and bolts, this will amaze you. Safe, quick, and very high heat to loosen the offering fastener.

Kent was a little skeptical when you first used this—it sounded like it would be too good to be true. The first use was getting some rusty bolts off the Garrett T3 turbine housing ( some of you know the pain there!). Well, it worked, and it worked very well.

$228.00

617 Diesel Garrett T3 Turbocharger 200K High Performance Overhaul Kit

For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985

For 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985. Buy the complete kit and save! If your Garrett T3 turbo has over 200K Kent highly recommends you plan on doing the complete overhaul.

$12.85

Liqui Moly Pro-Line Turbocharger Additive

Use when installing new or rebuilt turbochargers - Suitable for all types.
Used for initial filling of new turbochargers to protect against dry running and damage caused by lack of oil after a change in during the running-in phase. Improves the operational reliability of the new turbocharger.
$345.00

1978 to 1984 OM617 New Assembled Replacement Turbocharger

All new parts. We assemble and check fit and tolerances. Kent's written instruction manual included. WARNING: Only fits engine with Garrett turbos. Will not work with KKK turbochargers.

New in 2023. This is "almost" ready to install. You will need to install some parts from your existing turbo charger once you remove it from the engine. Watch the video below for a full explanation. 

$98.50

617 Diesel Garrett T3 Turbocharger Turbine Wheel ( Impeller) and Shaft

For all 5 cylinder Garrett turbos on 300SD 300D 300CD and 300TD 1978 to 1985

New turbo charger turbine shaft and exhaust turbine wheel as shown. This part has been highly balanced and is ready for installation. Make certain your compressor wheel is not bent or damaged as that could throw it out of balance. Comes with new shaft nut.

$118.95

OM 603 1986 to 1987 Garrett T3 Turbocharger Basic Overhaul Kit

Only fits 6 cylinder 1986 to 1987 300SDL, 300D and 300TD with GARRET TURBO!!!

This kit will allow you to replace the critical worn parts inside the early 603 U.S. made Garrett T3 turbochargers. This kit will not work if your engine has a KKK turbo made in Germany. The only way to tell which turbo you have is by visual inspection.

$12.25

Garrett T3 Turbocharger Compressor Housing Gasket

Fits Garrett Turbo chargers only 1978 to 1987 - 300D 300CD 300TD 300SD and 300SDL

This is the highly specialized paper gasket that seals the center section forward bearing plate to the compressor wheel housing as shown below:

$49.95

617 Turbocharger Garrett T3 Compressor Wheel

For 1978 to 1985 Turbo Diesel 300D 300TD 300CD 300SD with Garrett Turbo

Brand new balanced compressor wheel as shown. Increase horsepower by installing a new compressor impeller. The sharp clean edges really make a difference in compressor boost output. Most of these old wheels are worn. No instructions included.

$59.50

617 Diesel Garrett T3 Turbocharger Custom Overhaul Tool Set

For all 5 cylinder turbo 300SD 300D 300CD and 300TD 1978 to 1985 (NO instructions included)

This set of special tools is designed to help speed the removal and ease the overhaul of a Garrett T-3 turbocharger on a 617 turbo diesel engine.

$66.95

Best Grabbing and Clamping Hand Tool Set in The World - Kent’s Collection

3 super custom tools that you will not find anywhere else in the world. All designed by Kent Bergsma

This is a collection of SPECIAL tools Kent has put together to help you grab, twist, and pull on things in and around your Mercedes.  He makes each one of these tools right here in his shop.

PDF
$9.95

617 Garret Turbocharger Boost Pressure Testing and Adjustment

A double-up PDF download

This manual will cover the basics of testing and adjusting boost pressure on the Garrett turbocharger on 1978 to 1984 5 cylinder turbo diesel engines. It will not cover turbo charger removal or repair. Those details are included in my complete turbo charger overhaul kit available separately.

$38.25

115 116 123 126 Chassis 5 cylinder Exhaust / Intake Manifold Gasket

Fits 1975 to 1985 300D 300CD 300TD 300SD. Includes correct alloy locking nuts

Fits W115 W116 W123 and W126 5-cylinder both turbo and non-turbo diesel engines from 1975 to 1985. Check yours for staining around the gasket. Also, check nuts for tightness. These symptoms may indicate a leak. This is an important maintenance item.

Waste Gate Hose
$24.95

617 Turbo Diesel Silicone Waste Gate Hose - OEM

GARRETT TURBO ONLY ---- WILL NOT FIT KKK TURBO

New silicone waste gate hose that fits all 617 turbo diesels only with the Garret T3 turbo as shown below. This includes the 300SD, 300D turbo, 300CD turbo and 300TD turbo 1978 to 1985. common wear item. This hose is often replaced with a standard rubber hose or fuel hose.

$27.50

617 Diesel Garrett T3 Turbocharger Installation Gasket Set

For all 5 cylinder turbo 300SD 300D 300CD and 300TD 1978 to 1985

Use this gasket kit to install a rebuilt or good used turbo charger on your engine. Does not include exhaust manifold to engine block gasket but you do not need to remove the exhaust manifold to change the turbo. This is a gasket set only. NO INSTRUCTIONS INCLUDED.