Search | Physical Product | New

Displaying 1001 - 1050 of 1228
103 valve stem seals
$29.50

190E 2.6 300E 300SE Valve Stem Seal Replacement Kit

103 Engine

 If you are experiencing high oil consumption and excessive engine smoke with your 6 cylinder 190E or 300E (CE and TE) or 126 300SE / L with the single cam 103 engine this is most likely what you need to fix the problem.

$138.00

OM617 Turbo Diesel EGR Valve and Flex Pipe

1981 to 1984 300D 300CD 300TD 300SD WITHOUT trap oxidizer.

Good used working EGR valve. HARD TO FIND. The valve opens and closes properly and holds a strong vacuum but shows a very, very slow leak when testing with a hand pump.

egr vacuum switch valve
$39.50
Currently out of stock.

617 Turbo Diesel EGR Thermal Valve

1981 to 1985 Turbo 300D 300CD 300TD and 300SD

This is that little vacuum valve that always gets it nipples broken off... It is located right behind your thermostat housing on the 1981 to 1985 turbo diesel engines. It controls vacuum going to your EGR valve.

Diesel long cigar hose
$28.50

115 300D 116 126 300SD Diesel Cigar Return Hose 327 mm

Cigar shaped return fuel hose from top of factory filter to return hard line. Fits all 300SD TURBO diesels from 1978 to 1985. Also fits 115 300D 5 cylinder 1975 to 1976 (but not 4 cylinder). 327 mm in length. Check to see if yours is cracked today!

Diesel short cigar return hose
$23.95

115 123 Diesel Cigar Return Hose 265 mm

Cigar shaped return fuel hose from top of factory filter to return hard line. Fits 115 220D, 240D four cylinder only and all 123 diesels from 1977 to 1985 (both 4 and 5 cylinder and turbo and non turbo. 265 mm in length. Check to see if your hose is cracked today!

fuel tank exit hose
$22.95

116 123 126 Diesel Sedan Coupe Fuel Tank Exit Hose

Factory fuel hose that goes from the fuel tank strainer to the metal feed pipe just above your rear axle. Fits all 116 diesel 300SD, and 123 240D 300D and 300CD and all 126 chassis diesels 300SD 300SDL 350SD/L.

$95.25

116 123 126 Chassis Front Wheel Bearing Replacement Kit - All Models

ALL parts shown for BOTH wheels! 450SE 450SEL 300SD 240D 300D 300TD 300CD 280E 280CE 380SE 380SEL to 1985

If you need everything for your front hub, then this is the best deal. This kit is for BOTH sides. Comes with inner and outer wheel bearings, seal, cap, ground clip, and a tube of FREE HIGH PERFORMANCE synthetic wheel bearing grease.

Long drive pin punch set
$13.95

Long Drive Pin Punch Set (5 Pc)

Long drive pin punches are very handy when working on your Benz. The smaller size in this set is particularly helpful when removing and replacing twin pin style brake pads. All steel. Made in India. Pin sizes: 1/8'', 3/16'', 1/4'', 5/16'' and 3/8''

123 Idle control cable end piece
$22.50
Currently out of stock.

Early 240D 300D Non-Turbo Idle Speed Control Cable End Piece

Genuine OEM -- Remaining stock is low!! NO LONGER AVAILABLE

New metal end piece with set screw that connects to the linkage on valve cover on 1977 to 1979 300D CD and 240D. Check your cable for an exact match before ordering. This piece always seems to get lost and can be hard to find.

123 Early glow fuse repair kit
$24.50
Currently out of stock.

123 Early 300D 300D 300TD Glow Plug Main Fuse Panel Repair Kit

Fits 1977 to 1979 models with fuse on the firewall.

This is such a big problem on the early 1977 to 1979 123  300D, 300CD and 300TD diesels that I decided a good replacement kit was in order. Often I find the main feed wire loose or frayed, the fuse box cracked or melted, and the fuse connector points corroded or loose.

front wheel bearing outer
$17.50

116 123 126 Chassis Front Outer Wheel Bearing

240D 300CD 300D 300SD 300TD

New front outer wheel bearing with race for one side only. Fits right or left side on 116, 123 and 126 chassis, 240D 300D 300TD 300CD 300SD from 1977 to 1984. PLEASE NOTE: WILL NOT FIT MODELS WITH ABS. 

123 126 Genuine OEM Alternator Mounting Bracket
$169.00

123 126 Genuine OEM Alternator Mounting Bracket

Special order item. Expect shipping delay

Fits ALL 123 240D 300D 300CD 300TD Diesels from 1977-1985, and ALL 116 and 126 300SD Diesel from 1978-1985. Here is a brand new Genuine OEM Alternator mounting bracket with new adjustment nut.

617 Turbo Kickdown Switch
$29.75

123 126 Chassis 617 Turbo Kickdown Switch

All Turbo 300D 300CD 300TD 300SD 1981 to 1985 -Located under throttle pedal

Brand new Genuine OEM turbo diesel kickdown switch. Fits 123 turbos from 1982-1985 and 126 turbos from 1981-1985. This switch is located under your accelerator pedal, and it tells the transmission when to down shift. If the switch breaks it can stick in or on!

$49.95

617 Turbocharger Gasket and Seal Installation kit

This is a brand new Elring seal and gasket installation kit for the 617 Turbo diesel turbo charger. Fits 116 Chassis 300SD from 1978-1980, 123 Chassis 300DT and 300TDT from 1981-1985 and 126 chassis from 1981-1985.

123 126 Rear Brake hose set
$32.50

EARLY 107 116 123 126 Chassis Meyle Rear Brake Hose Set

CURRENTLY SHIPPING FEBI BRAND

Here is a brand new set of Rear brake hoses for all 123 chassis 1977-1985 and 126 chassis 1981-1991, both gasoline and diesel models and 116 Chassis 300SD only, and 1973 to 1980 450SL.  Also fits 380SL from 1981 to 1985 -- US MODELS ONLY

123 126 Front Brake hose set
$28.75

Late 123 All 126 Chassis Meyle Front Brake hose set

CURRENTLY SHIPPING CORTECO OR VAICO HOSES

Here is a brand new set of Front brake hoses that fit all 123 chassis from 1981-1985 and 126 chassis from 1981-1991, both gasoline and diesel models.

_______________________________________________________________________________

108 114 115 116 107 123 Chassis Hub Cap Clip x5
$25.95

Genuine Mercedes Hub Cap Clips - set of (5)

Fits 108 114 115 116 107 123 Chassis

Brand new Genuine OEM hubcap clips for Chassis 108 114 115 116 107 123. Sold in a set of FIVE.

These will fit the standard 14 inch round hubcap on all chassis listed above. 

Early 104 Gas Engine Serpentine Belt
$32.95

Early 104 Gas Engine Serpentine Belt

Brand new Contitech Serpentine belt for 300CE 300SE 300SEL 300TE 190E from 1990-1993 with 104 engine. There are some vin splits on the end year, so any questions EMAIL with vin number before ordering.

SKU:GEG-COMSTB 

$365.00

1977 to 1979 W123 240D 300D 300CD 300TD Ignition Key and Lock Assembly Complete - NOS

Genuine Mercedes OLD STOCK found in warehouse. Very limited supply. FREE bonus new electrical switch and 44 minute video class

If you have a stuck key or failed lock in your 1977 to 1979 W123 this is your best option for a reliable replacement but we only have a few of these in stock. The exact originals as shown in the picture below are no longer made. These do not have a replaceable tumbler assembly.

Diesel Vacuum Source Troubleshooting and Repair
$19.75

Diesel 616 617 Vacuum Source Troubleshooting and Repair - by Kent Bergsma

Basic manual on vacuum output and testing. Does not cover all things vacuum. See description

Applies to 240D 300D 300CD 300TD 300SD Diesel This guide is written specifically for owners of 123 and 126 diesels from 1977 up to 1984. There are some sections that apply to the 115 and 116 chassis but it is not specific to those models.

602 SERP BELT
$32.95

602 Diesel Engine 190D 300D Serpentine Belt

For 1987 to 1993 Five Cylinder Diesels 190D 2.5 and 300D 2.5

New ContiTech Serpentine Belt. PDF Instructions included!

_______________________________________________________________________________

How to view the PDF digital instructions:

$62.75

R107 W114 W115 Front UPPER Control Arm Inner Bushing Repair Kit

BOTH SIDES INCLUDED (Right AND Left). This is a very common wear suspension part on the front end causing loose steering.

This is a great kit for your 350SL, 450SL, 450SLC, 380SLC, 380SL, and 560SL  from 1972 to 1989. It also fits all W114 and W115 Sedans and Couple both gas and diesel from 1968 to 1976. Brand new UPPER control arm inner bushing repair kit.

115 107 Upper ball joint
$29.75

Early 107 Late 114 115 Upper Ball Joint - Sold Individually

Brand new upper ball joint assembly with hardware. Fits all 114 115 Sedans and Couple both gas and diesel from 1972 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Replacing the upper ball joint is not a do-it-yourself job.

114 107 Lower Ball Joint Set
$55.00

Early 107 and All 114 115 Chassis Lower Ball Joints x (2)

This is a great kit for you 114 and 115 owners. Fits all Sedans and Couple both gas and diesel from 1968 to 1976. Also fit early SL and SLC convertibles and coupes - all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. Brand new set of 2 lower ball joints. This is not a do-it-yourself job.

107 Torsion bar kit
$52.75

Early 107 SL and SLC Meyle Front Torsion Bar Mount Kit

This is a great kit for you early SL and SLC owners. Fits all 450SL, 450SLC, 380SLC, and 380SL from 1972 to 1985. If you are getting a lot of body roll in the turns this kit will really tighten up the front sway bar.

123 126 striker bolt set
$16.95

123 126 All Models Door Striker Bolt Set (4)

Set of four (4) new factory door striker bolts. It is very easy to round these off. If you are planning on removing or adjusting your strikers then I highly recommend you have these new bolts on hand. Fits 123 chassis from 1977-1985 and and 126 chassis from 1981-1991.

123 hood release cable
$24.50

123 All Models Hood Release Cable

New complete hood cable assembly for 123. Take a close look at yours to see if it is kinked near the pull handle. Might want to replace it BEFORE it breaks off on you. Comes with new firewall grommet. Lists for $32.50!

123 early 240D slave cylinder
$47.50

123 Early 240 Clutch Slave Cylinder - Vin Number Specific

New Ate Clutch SLAVE cylinder for early 123 chassis 240D manual transmission. Be sure to check your vin number before ordering. This one fits up to the following vin number 123.123 - up to 219674. List price is $ 107.00

$43.35
Currently out of stock.

W116 Chassis Sedan New Rubber Trunk Seal with Instructions

Flexible glue and video class included. A common cause of water leaking in the trunk causing rust and foggy windows!

Stop those water leaks now! This high-quality rubber trunk seal fits 116 sedans (Gasoline models ONLY)from 1977 to 1980, including the 280SE, 450SE, 450SEL, and 450SEL 6.9. It now comes with complete instructions loaded with tips.

Trim and Moulding Tool Set
$18.50

All Models Trim and Moulding Tool Set

Prevents damage to paint and parts - All plastic

 This 5 piece set is made out of plastic so it will not mar or scratch paint, glass, chrome trim, etc.

190D 601 Intake manifold gasket
$18.75

201 190D 2.2 Diesel 4 Cylinder Intake Manifold Gasket

New intake manifold gasket between head and manifold. You should consider replacing this gasket when you remove your manifold to replace the glow plugs. Fits all 601 4 cylinder diesel engines from 1984 to 1986.

$18.50

124 126 140 603 6 Cylinder Diesel Intake Manifold Gasket

1987 300D and 300TD, 1986 to 1995 300SDL 350SD 350SDL and S350

New intake manifold gasket between head and manifold. You should consider replacing this gasket when you remove your manifold to replace the glow plugs. Fits all 603 6 cylinder diesel engines from 1986 to 1995.

601 602 603 Engine Diesel Mechanical Lift Primer Pump
$245.00
Currently out of stock.

601 602 603 Engine Diesel Mechanical Lift Primer Pump

For all 201 124 126 models 1984 to 1993 - Includes PDF 60x lift pump Instructions

New Bosch pre-pump that mounts on side of injection pump. This is what makes your 60x. engine self priming and delivers fuel pressure to the injection pump.

60x water pump
$89.50

602 603 Five and Six Cylinder Diesel Engine Water Pump

Fits only models listed below

New heavy duty water pump complete with gasket that fits all 190D 2.5, 124 chassis 300D, 300TD and 300D 2.5, 126 chassis 300SDL and 350SD and SDL, and 140 chassis 300SD and S350D. No instructions at this time.

617 Flywheel access hole cover
$9.50

123 126 Turbo Diesel Flywheel / Flex Plate Box Cover OEM

This is that hard to find plastic inspection / access cover that goes on the underside of your 617 turbo diesel engine.  Most of the time it is cracked or missing allowing dirt and oil to get into the flywheel area. Easy remove and replace.  It just snaps in the hole.

Pages