Kent's Factory Service Manuals collection is going on sale now. CLICK HERE.
Digital PDF instructions for cleaning your pencil glow plug chambers. 5 pages of step by step instructions with detailed pictures to visually assist you in completing the job.
Applies to 190D, 200D, 220D, 240D, 300D, 300CD, 300TD and 300SD (Not for 1984 to 1985 190D) Downloadable PDF eBook 3 explains how to properly remove and replace the glow plugs in the early diesel engines up to 1985.
If you have never replaced a hood star it can be frustrating getting the old one out and the new one in properly.
Our detailed instructions will explain how to do it in a few minutes with simple hand tools. Multiple pictures visually walk you through the process. PDF is 2 pages.
These instructions pertain only to the multi pin plug switch on the back of the ignition lock and key assembly.
If you have a W116 or W126 300SD or a turbo 1981 to 1985 5 cylinder W123 Diesel you must pay attention to your oil cooler hoses. If one of these hoses fail you will destroy the engine unless you are in the habit of looking at your oil pressure gauge every 5 minutes while driving.
In a perfect world your diesel would not leak a drop of fluid. Unfortunately, with the age of your vehicle, it may not be economically possible to eliminate every leak. Sometimes you may just have to live with some leaks.
For all 126 sedans built from 1981 to 1991.
New high quality replacement oil sealing rings for the main shaft (front and rear) of the Garrett T3 Turbo. This will NOT fit other turbo chargers like the KKK.
Fits the following, 201, 124, and 126 chassis with 6 cylinder single cam gas engine. In my opinion, the 103 6 cylinder gas engine (built from 1986 to 1993) is one of the best engines Mercedes has ever built.
Covers 190D 300D 300TD 300SDL 350SD 350SDL 1984 - 1993. Book 4 in our glow plug series explains how to properly remove and replace the glow plugs in the OM 601 602 and 603 diesel engines from 1984 to 1993.
This guide will explain how to properly change the fluid and filter in your late 123, 126, 201, 124, late 107 chassis Mercedes as well as early 129 and 140 chassis. This includes model years from 1982 to 1993.
Installation instructions specific for 123 / 126 chassis only - general for other chassis. Details included on how to make your own fuel tank outlet hose and fitting with materials supplied in the Flexible Fuel Line Replacement kit.
This instruction booklet is meant to be an introduction to simple rust repairs. I have also written a manual that goes into more advanced repairs using Miracle Paint to replace larger rotted sections of sheet metal.
Brand new rear end differential front seal. Fits both gas and diesel models. This is NOT the seal for the axles.
Dirko sealing compound is permanently elastic, cold vulcanizing, silicone-rubber based. Can be used for connecting joints, cylinder head, crankcase, oil sump, timing case, thermostat, water pump, transmission, axles, differential, radiator, chassis.
General-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weather stripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible.
Sil-Glyde is a silicone based brake lubricant recommended for the entire brake assembly and is compatible with rubber. It is moisture-proof and heat resistant to +600 degrees F, which means it won't burn-off like other brake noise products.
Unique wax like stick works like Loctite Hi-Tack liquid but without the mess. It is low odor and solvent free. Sets quickly to a very tacky film and seals and holds the heaviest gaskets in place. Resists gasoline, oil and common shop fluids.
Cold Weld sets up in 15 minutes and has a test proven strength greater than 3000 psi after 16 hours. Resistant to most shop fluids including: water, diesel, fuel, gasoline, antifreeze, hydraulic fluids, motor oil, and transmission fluids. Can be drilled, filed, sanded, machined and painted.
This is a must-have if you have a prized Benz or any car you don't drive often!! If you let any of your cars sit for long periods ( generally over 30 days) without driving them, you can ruin your battery, especially if you let it go completely dead.
Fits all DIESEL ENGINE exhaust systems for 115, 116, 123, 126, 124 and 201 chassis from 1968 to 1995. If you are looking for a more robust exhaust hanger this is it! It is a stronger and more secure exhaust hanger than the standard round rubber type.
Complete valve stem seal set for the 603 engine.
This is not a normal nut. On the face it has a special hard plastic nylon seal. When this seal deteriorates you may see evidence of power steering fluid seeping out of the bottom the the adjustment locknut (located on the top of the steering box).
This is a special pre-chamber collar nut removal socket ONLY that works on the diesel engines in the 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis).
This is a special pre-chamber threaded fitting that you can attach to YOUR slide hammer to remove the pre chamber on 1990 to 1991 350SD 350SDL (126 chassis), 1990 to 1993 300D 2.5 (124 chassis), and 1992 to 1995 300SD / S350 (140 chassis). You will need to own or purchase a 5 lb slide hammer a
Brand new passenger side rear door power window regulator. Motor not included
Fits the following 126 models:
Only two available at this price. Quality new part made by VDO.
126 Sedan 1981 to 1991 Driver Side Rear Door Window Regulator
Fits the following 126 models: after early vin number noted.
Brand new gasket. Make sure this fits your transmission before ordering. No returnable if ordered in error.
This is a very handy smaller torque wrench to have in your toolbox. Perfect for spark plugs. It will do fuel injectors but is not quite big enough to torque wheel lug bolts. Range is 5 to 80-foot pounds. The case will be black rather than red.
Nice set of pick tools with plastic handles. They have strong steel tips which allow for more prying and twisting with less tendency to bend the tips as you would with dental pick tools. Note: Quarter is not included! Shown for size reference only
This is Kents new favorite ratchet wrench for turning engines over during service and repair. There are a number of maintenance procedures that require you rotate the engine over by hand.
Final drive seal (45 x 65 x 11mm)
Fits Mercedes Benz:
Engine Camshaft Woodruff Key
3 Degrees Offset
Fits Mercedes Benz:
Replace those nuts that keep loosening up with nylock metric nuts that just won't come off. Inside the door panel on the window regulators. Around the engine compartment. Air filter housing nuts. etc. etc.
Excellent used flywheel. Has good gear teeth for starter motor.
If you already have or are willing to buy a 5 pound slide hammer this special threaded fitting will allow you to PULL the pre-chamber from the cylinder head once you have removed the collar nut and the glow plug ( a collar nut removal tool is required look below to learn more).
Good used ring for flywheel bolts as shown. These often get damaged with you have to cut one of your flywheel bolt heads off.
Brand new alternator drive Serpentine belt for 6 cylinder Mercedes Diesel 603 Engine.
This is one of the more common oil leaks I see on the 602 (5 cylinder) and 603 (6 cylinder) diesel engines. In fact, I have seen it on almost every one of these engines I have worked on.
I have used a lot of different clamping tools over the years to prevent fluids from leaking out when removing coolant, fuel, or brake fluid hoses. Most work ok. Some are hard to use in tight places. Many do not stop every last drip from coming out of the hose.
Fits Mercedes Benz Models:
Grommets push into the holes in the trunk to hold the emblems for the right and left side as applicable. A must have if you plan to repaint your car. Video on how to remove your emblems without damaging them is included free. These will work on the following models.
Mercedes-Benz 230
This set of 5 pick tools have very thin and sharp points. Best set Kent has found to remove orings in hard to get to locations. The variety of angles available allows you to get into almost anywhere to remove and o-ring, sealing ring or other small part.
When replacing front shocks on the above mentioned Mercedes you must a 10 mm 12 point shock with 3/8 inch drive. If you don't have one you will in trouble.
This is a high quality thin wall socket made in Taiwan.
This set of special tools is designed to help speed the removal and ease the overhaul of a Garrett T-3 turbocharger on a 617 turbo diesel engine.
If you are going to work on your diesel fuel injectors, you are going to need a torque wrench. If you are going to tighten your alloy wheel lug bolts properly, you should use a torque wrench. In fact, if you do your own work, you should have a 1/2-inch clicker torque wrench in your toolbox.
Works on 110, 115, 116, 123, 201, 126 and 124 diesel engines 200D 220D 240D 300D 300CD 300TD 300SD 190D 300SDL. We have found that over half of the deep sockets we test will not go over some of the longer injectors.
Maintenance Alert: We have had lots of reports of these bolts loosening up! They WILL shear off if not caught early enough. When that happens the pulley will fall off. At high speed this can lead to engine overhead and even a damaged radiator.